Air filtration - Import export

AERO HEPA HVHT filters are the new generation high efficiency MiniPleat High Temperature HEPA filters available in a wide range of efficiencies from E10 to E12. AERO HEPA HVHT filters are designed to deal with Hot air filtration in installations where highest degree of air cleanliness is required. Theseare available in Galvanized Steel as well stainless steel frame types.

Aero Cell HTVII filters are new generation high efficiency minipleat high temperature fine filters available in a wide range of efficiencies from M6 toF9. Aero Cell HTVII filters are designed to deal with hot air filtration in installations where the highest degree of air cleaniless is required. Frames aremade up or either Galvanized Steel or Stainless Steel. The pleats are separated by glass paper and completely silicon free construction.

These are the conductor used in filtration system.

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

CSN® Dummy Load Resistors used as dummy loads for testing high frequency radio transmitter systems. Schniewindt had already supplied dummy load resistors with rated max. cont. power up to 1500 kW. CSN® Dummy Load Resistors are designed and manufactured individually to customer requirements and specific application.

CSN® PreInsertion Resistors are used for limitation of transients during energisation process of transformers and HVDC VSC converter applications. CSN® Discharge Resistors are used for discharge of Capacitors, reactors and superconducting magnetic field coils. They are characterized by a high dielectric strength and energy absorption capacity. CSN® PreInsertion or Discharge Resistors are designed and manufactured individually to customer requirements and specific application.

CSN® Neutral Earthing Resistors are used in power distribution systems for star point earthing of transformer or generator windings. According to the application (low or high ohmic neutral earthing type) pakkages made out of meander shaped stainless steel wire elements or CSN® Resistor Webs will be used as active material. Schniewindt has already supplied units for system voltages up to 380 kV and earth fault currents up to 70 kA. CSN® Neutral Earthing Resistors provide optimal solutions for your applications high or low resistance values outdoor or indoor operation reliable, nearly maintenancefree technology compact design with high power density reliable performance at all system voltages Every single CSN® Neutral Earthing Resistor is manufactured according to individual customer requirements.

CSN® Load, Testing and Special Resistors are used to test generators and emergency generating sets to test battery capacity as dummy load when testing circuit breakers to discharge capacitors for starting, controlling and breaking of electric drives CSN® Load, Testing and Special Resistors are characterized by technically mature and proven design for operations both indoors and outdoors optimal design to suit all current values and load cycles reliable control of all operating voltages even in most adverse service environments longterm stability highly reliable technology CSN® Load, Testing and Special Resistors are designed and manufactured individually to customer requirements and specific application.

The energy costs of a compressed-air system are decisively influenced by the pressure drop occurring during compressed-air filtration. To maintain the required operating pressure, this pressure drop needs to be compensated by correspondingly higher compressor performance. The consequence: increased energy demand, premature wear of the compressor ... and therefore higher costs. The better solution: CLEARPOINT compressed-air filters by BEKO TECHNOLOGIES.

The unique and mobile all-rounder for professional H14 HEPA air purification, high-performance room heating, thermal decontamination and thermal disinfestation Heat, treat, repeat. Our vertical heater exclusively available at Trotec: HighPerformance for four different applications The concept of a basic device that can be combined with variable equipment variations – all "made in Germany" – makes the TAC XT an ultimate air handler offering a brand new range of applications, and therefore the maximum investment security possible. 18 kW heating capacity (27 kW optional), a ventilation performance up to 2,500 m³ that can be adjusted by means of several stages and an outlet temperature that can be flexibly set to 75 °C max. make the TAC XT an optimal device for many specific tasks: High-performance air purification and virus filtration Fully automatic room heating with or without HEPA air purification Thermal disinfestation Thermal decontamination of rooms and surfaces

Increase performance of your pneumatic systems Powering pneumatic machines requires clean and conditioned air or gas. Our pneumatic filters are designed to work together with regulators and lubricators (FRL units), to offer outstanding performance and a lower-cost alternative to traditional sintered-metal filters. Specifically designed to provide an excellent combination of particulate filtration, air flow and back pressure performance, while complying with strength and aesthetic requirements, these single-component molded filters: Meet your filtration requirements – Optimized design meets filtration, airflow and pressure drop requirements. Reduce costs – Sintered polymer filters are more cost-effective than sintered metal. Improve machine longevity – Design is optimized for reliability, efficiency and longevity of pneumatic machinery. Features Work together with regulators and lubricators (FRL units) to deliver clean and conditioned compressed air or gas Strong and rigid for...

Advantages Absolute separation of liquid particles greater than 10; for the operation under etreme temperature and pressure; minimal pressure loss Area of application For the filtration of natural gas Flow rate Various filter sizes and the modular design enable any required flow rate. classification number P51 Filter aid - Filtration degree - Medium Air, gases Filter material Wired Mesh

AirgoClean® – Powerful brand. Clear message. Clean air.The name says it all: AirgoClean® is Trotec's brand name for comfort air purification in private settings. And here the AirgoClean® One is our clear number 1 and first recommendation for virus filtration and permanent air pollution control in conference rooms, waiting rooms, medical and veterinary practices, law firms or high-class private environments. Many things can be done better. But not the AirgoClean® One. We have to admit that quite a few air cleaners leave a good impression at first sight. But in the long run, many of them are in danger of literally running out of breath sooner or later. Permanent operation, uninterrupted air purification around the clock, non-stop virus filtration – this wears out the material, you have to be made for it. Just like Trotec's AirgoClean® One.

EFFECTIVE VIRUS AIR PURIFICATION: MODEL VARIANTS AND SPECIAL SOLUTIONSProfessional Trotec solutions for virus filtration and air pollution control No other method than the HEPA high-performance filter technology provides "as much clean air for quickly diluting the aerosol clouds" with increased safety for the optimum price/clean air ratio! To ensure that you're always provided with the precisely-tailored Trotec solution for effective virus filtration of the room air, exactly adapted to your individual safety requirement, in addition to the high-performance air purifier TAC V+ our range of products contains further model variants and special solutions. To help you integrate the TAC V+ into the respective application environment, in addition to the standard colour yellow, this device is also available painted in the colours basalt grey, white or bronze.

In addition to filtration, compressed-air drying contributes significantly to an increase in process reliability. Humidity in compressed-air systems causes corrosion, and promotes the growth of micro-organisms. In individual cases, condensate emerges at the point of use - an ongoing danger for the operational flow, for example because of failing pneumatic controls, increased wear and tear or because of other disturbances in the production process. With considerably enhanced process reliability, the DRYPOINT dryer technology offers decisive advantages for every field of application. The BEKO TECHNOLOGIES portfolio comprises application-optimised refrigeration, adsorption and membrane dryers for volumes up to 1,500 m³/h. This range of dryers is completed by heat-regenerated EVERDRY adsorption dryers which are designed for large volume flows up to 20,000 m³/h.

EFFECTIVE VIRUS AIR PURIFICATION: MODEL VARIANTS AND SPECIAL SOLUTIONSProfessional Trotec solutions for virus filtration and air pollution control No other method than the HEPA high-performance filter technology provides "as much clean air for quickly diluting the aerosol clouds" with increased safety for the optimum price/clean air ratio! To ensure that you're always provided with the precisely-tailored Trotec solution for effective virus filtration of the room air, exactly adapted to your individual safety requirement, in addition to the high-performance air purifier TAC V+ our range of products contains further model variants and special solutions. To help you integrate the TAC V+ into the respective application environment, in addition to the standard colour yellow, this device is also available painted in the colours basalt grey, white or bronze.

BIEGLO offers high temperature resistant and flame retardant fibers. The application is similiar to meta-aramid, but PI fibers have its own advantages. The long-term service temperature is 260℃. The decomposition temperature is 560℃. The LOI is 38%, it means it is non-flameble fiber. The Dexnyl Polyimide fibers are applicable in many products, but they are used best in niche-applications with extreme standards for the material: 1- FR Protective clothing: e.g. military fligth clothing, flame resistand underwear, firefighter uniform etc. 2- High temperature filtration and industrial insulation: e.g. dedusting filtration for cement factories, steel or powder plants, air filtration for painting area operated at more than 300°C . 3- Composite material: taking advantage of insulation, flame retardance and high emperature resistance, chopped fiber can be used as reinforced material.

Aerofil offers good quality overspray collector media in two capacities – Aero Mesh SC and Aero Mesh HC.

Aerofil offers another exceptional product for overspray collection – Aero Pleat P. These are perforated cardboard filters that work on the principle of inertia. This filter design obliges the charged airflow to change direction several times. The particles heavier than air then adhere to the walls while the airflow continues unhindered.

Aero Cell Single VGT is a highly efficient filter designed to be pulse cleaned. The filters are made up of pleated media and available in F9 and E11/H11 grades. These filters are designed for GT applications. Benefits to be highlighted are High Dust Holding Capacity, Longer life time, design to survive rough conditions, very low pressure drop, durability etc.

AERO CELL V HEPA GT filters are the new generation type of high efficiency MiniPleat compact HEPA filters available in a wide range of efficiencies from E10 to E12. AERO CELL V HEPA GT filters are designed to use in HVAC installations where highest degree of air cleanliness is required. The high burst resistance, low pressure drop and high dust holding capacity offered by the filter made it an ideal filter for extreme operating conditions like Gas turbine air intake fine filtration. This filter perfectly suits the third stage filtration levels in Gas Turbines after a normal G4 pre filter and F7, F8 or .

Aero Hydro Pleat is a new generation filter that replaces the conventional pre filters. This features coalescing ability combined with G4 filtration and thus stops moisture to a high extent. They are available in G4/M5 efficiency and are completely metal free products.

Aero carb is loose granules of activated carbon. This comes in loose form and are used as a blending option for treating various VOCs. They are supplied in 4mm pellet form or in different mesh sizes as per customer requirement. Impregnation of various elements onto this is also done to treat special gases.

Aero Alum is loose granules of activated alumina. This comes in loose form and are used as a blending option for treating various VOCs.

Aero Carb VHC model filters are made up of activated carbon media filled in honeycomb panels and bonded to a rigid V shaped construction in anticrash polystyrene frame. These filters operate wellin heavy duty applications. A variety of carbon selection is available depending on the gases to be treated.

Aero Carb V model filters are made up of activated carbon media, close pleated and bonded to a rigid V shaped construction in anticrash polystyrene frame. These filters operate with no carbon shedding, with very low pressure drop and are incinerable. A combination of synthetic media and activated carbon ensured higher degree of filtration efficiency.

Aero Carb T filters are disposable type panel filters which offers excellent odor filtration, designed to suit a wide variety of HVAC applicationsincluding Hospitals, Pharmaceutical companies, Food processing units, Restaurants, Airports, Commercial Buildings etc. These come in 25mmand 45mm depths.

Aero Carb H filters are disposable type panel carbon filters. They are made up of honeycomb construction with activated carbon granules filled in. Casings are made up of metal or plastic. These filters could remove odor in heavy duty applications. A choice of media selection is available.

Aero HEPA HVP are mini pleated box style high velocity HEPA filters. These filters operate at very high velocity of 3.3 m/s and are considered thebest replacements for conventional HEPA filters. This also features plastic frame construction and so is a “metal free” filter which is incinerable.HVP are available in 6V, 4V and 2V configuration ranging from ISO 15E to ISO 50H grades.