Results for
IPF ELECTRONIC GMBH
Germany
ipf cable sockets are used primarily for establishing the electrical connection of sensors. Their features are characterized by rugged design, the highest protection classes (IP67 \ IP68 \ IP69K) and, if desired, with 360° shielding. With the features: bus-ready, suitable for use with drag chains and robots, resistance to oil and chemicals, resistance to welding sparks, their resistance to cleaning agents or high-pressure and steam-jet cleaning, the expanded temperature range of up to +230°C, the rapid interconnection technology and special data transmission properties, the cable sockets meet all requirements in automation technology.
Request for a quoteIPF ELECTRONIC GMBH
Germany
Connecting digital signals directly at the machine can contribute to significant cost and effort minimization. A classic application is the linking of different signals directly in the field. Thus, it is possible to avoid long line paths of many individual devices, which significantly reduces the wiring effort and the need for control inputs. All input signals on the logic modules are visualized by integrated LED and are electrically decoupled from each other. In this way, influences from one device to the other are reliably prevented. The outputs of the modules are overload-proof and the upcoming signal is also indicated by an LED. In addition to logical input signal connections such as AND and OR, versions with signal change control are also available. The ipf logic modules are available for DIN rail mounting or as field modules.
Request for a quoteRIEGLER & CO.KG
Germany
Quick-connect couplings consist of two components – coupling socket and plug. They are the ideal interface to connect or disconnect the flow of gaseous or liquid media in lines safely and quickly. Quick-connect couplings are used for the conveyance of air, water, oil, acids or various gases. Here you will find single-sided and double-sided blocking quick connect couplings up to I.D. 19, asymmetrical couplings in different sizes and hydraulic couplings standardised to ISO. Our safety couplings are available in swivel, rotating and push button design and in combination with sliding valve and quick connect coupling. RIEGLER couplings are available with a flow of up to 8700 l/min and in EURO, ARO210 and ISO 6150 C plug profiles. The range of materials goes from bright and nickel-plated brass to different variants of stainless steel up to aluminium, plastic, steel and zinc die casting.
Request for a quoteRIEDEL COMMUNICATIONS GMBH & CO. KG
Germany
MediorNet offers Link Cards with and without integrated CWDM multiplexing to network MediorNet mainframes with a bandwidth of up to 76.5 Gbit/s on a single fiber link. MediorNet‘s standard fiber transceivers have an optical budget of 18 dB minimum, allowing for distances of up to 40 km (25 miles). A MediorNet fiber link always consists of duplex fiber to allow bi-directional signal transport. MediorNet CWDM Link Cards can also include external optical signals and transport them transparently through the system. All MediorNet Link Cards provide signal monitoring and link status information, which can be monitored via status LEDs and system wide via the MediorWorks software and SNMP network management systems.
Request for a quoteIGUS® GMBH
Germany
E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
S-hook
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Meat hook
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Connection link
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Quick link
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
S-hook
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Connection link
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Quick linkn with wide opening
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Quick link
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.
Request for a quoteBME BAUMASCHINEN ERSATZTEILE INH. DIPL.-ING.(FH) MATHIAS SCHMIDT
Germany
The steel chains in our range are made from highquality materials. From the beginning, it was also our goal to shorten the production process and to balance the sales price of the chains at the lowest possible price level. In this way, we can offer you the highest quality of steel chains at fair prices.
Request for a quoteMINEBEA INTEC GMBH
Germany
As the first weight transmitter for analogue strain gauge load cells, the Link E has a high-contrast touch display that makes it easy to read and easy to find all settings and information. Configuration takes place via your favourite web browser – no additional software required. ‘Smart Calibration’ enables adjustment entirely without the need for weights. This keeps installation and access times to a minimum. The Link E gives you the option to choose from nine widely-used interfaces for any application, including ModBus-TCP, Profibus, ProfiNet, DeviceNet or Ethernet/IP. The Link E is the result of the continued development of the successful PR 5211.
Request for a quoteEPP ENERGY PEAK POWER GMBH
Germany
With the VARTA Link, you can operate up to 5 VARTA energy storage devices on a shared house connection. All VARTA energy storage systems, even those with different capacities, can be connected.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GHM MESSTECHNIK GMBH
Germany
Signal linking of 2 voltages 3-way isolation 1 or 2 analogue outputs Plug-in filter modules 10..10 kHz
Request for a quoteSIKO GMBH
Germany
The bus-compatible AP10 position indicator serves for monitored format adjustment in order to reduce setup times and enhance machine efficiency.Readability has been optimized to achieve intuitive user guidance. The backlit display clearly indicates target and actual values two-row position indicator for representing target and actual values and the two LEDs clearly show the direction to be set. Electronic position indicator with bus interface. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus or IO-Link as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S position indicator. IP53 type of protection, IP65 as an option.
Request for a quoteWOWERAT GMBH
Germany
75% viscose, 22% polyamide, 3% elastane. Hand linked soft seams. Fine 200-needle-quality. Reinforced toe and heal. Viscose made of bamboo cellulose. Being super-soft and breathable viscose made of bamboo cellulose is the perfect innovation for the fabrication of modern textiles. Further on bamboo is a fast growing, renewable material. Therefore textiles made of bamboo viscose are the responsible choice to treat our environment with care. Sizes: 35-38, 39-42, 43-46, 47-49.Colors: black, white, beige, jeans, navy-blue, dark-brown, anthracite
Request for a quoteWOWERAT GMBH
Germany
94% cotton, 5% polyamide, 1% elastane. 10-gage. Hand linked. Real heal. Fits the current country-fashion. For women and men. Sizes: 35/38, 39/42, 43/46 Colors: natural mélange, silver mélange
Request for a quoteWOWERAT GMBH
Germany
78% cotton, 20% polyamide, 2% spandex; or 75% cotton, 22%polyamide, 3% spandex. No more boring socks: men have courage for color now! Hand linked soft seams. Knitted on computer machines. With high-quality piqué cuffs - best possible fit without disturbing gum. No pressure marks! Sizes: 39/42, 43/46, 47/50 - Colors: red, green, yellow, lilac, turqouise, dark-red, fir-green, bordeaux, aubergine, dark-blue (1 color/2-pack). Also available: 6192-5 = 60-pairs-assortment (39/42 + 43/46, all colors; please order 47/49 seperately) at a bargain price!
Request for a quoteWOWERAT GMBH
Germany
75% cotton, 22% polyamide, 3% elastane NEW DESIGNS! Unicorn and Pilot (available from End of September) Warming full terry quality. Hand linked. With Anti-slip print on soles and knees! Makes baby’s first crawling attempts more safe and comfortable. With super-cute bottom print! Sizes: 62-68, 74-80, 86-92 Motives /Sizes: Guardian angel: 62-68, 74-80, 86-92 Pirate: 62-68, 74-80, 86-92 Pilot: 62-68, 74-80, 86-92 Unicorn: 62-68, 74-80, 86-92 Car (remaining quantity): 62-68, 74-80
Request for a quoteMATTHEWS MARKING SYSTEMS
Germany
Our enclosed module featuring an internal power supply and printhead driver board, enables communication between the DOD printhead technology and the MPERIA controller through an Ethernet connection. V-Links can be stacked and networked through MPERIA®, providing a flexible and scalable system for small or very large applications.
Request for a quoteAXRO GMBH
Germany
AXRO - Your partner for network peripherals and hardware. As a specialist for original consumables, we have been supplying resellers with office supplies for more than 25 years. We have expanded our product and brand portfolio with computer and network peripherals from TP-Link. Your advantages at a glance: - Comprehensive, highly topical product and brand portfolio - High availability of goods - Profound market and industry knowledge - Individual sales persons - Worldwide delivery We are looking forward to your inquiry!
Request for a quoteBDSENSORS GMBH
Germany
The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections
Request for a quoteBDSENSORS GMBH
Germany
The electronic pressure switch DS 350 is interesting for all users in plant and machine engineering, due to the integrated IO-Link interface to exchange process data, diagnostic reports and status messages with a superordinate control level, as standard. In addition, further information can be retrieved that allow conclusions to the application process. Especially in mechanical engineering, great demand for flexible operating conditions have to be satisfied. Features — Nominal pressure from 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.5% / 0.35 % (opt. 0.25 %) FSO — IO-Link according to specification V 1.1 — smart sensor profile — data transfer 38.4 kBaud — indication of measured values on a 4-digit LED display — rotatable and configurable display module — parameter settings via IO-Link or menu (VDMA-conform) — additional information via IO-Link accessible Optional features — different mechanical connections
Request for a quoteBDSENSORS GMBH
Germany
The pressure transmitter DCT 553P is used in the food and pharmaceutical industries or in applications where a dead space-free process connection is required. A capacitive ceramic pressure sensor developed in-house is used as the basic sensor, which is characterized by a high overload and excellent surface quality. The special design prevents the formation of condensation inside the pressure transmitter and thus failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygienic version — protection IP 67/ IP 69 — high overpressure resistance — diaphragm ceramics Al2O3 (99.9 %) Optional: — different process connections
Request for a quoteResults for
A link - Import exportNumber of results
59 ProductsCountries
Category