Results for
JSC SAKCABLE (SAKCABLE)
Georgia
For lighting and power circuits while stationary laying in electric devices, for inflexible installation in electric devices, machinery, mechanisms and industrial machines for rated voltage up to 450V (for networks 450/750V) frequency up to 400 Hz or permanent voltage 1000V. Is used for laying in empty places of steel pipes and construction structures, where there are not frequent bends of the conductor. The copper cores with section 1,5-4,0mm2 inclusive are produced with PPV-1 flexibility and PPV-3 with 3,4 class flexibility according to the standard 22483-2012. Number of cores in the conductor 2,3Label attached to wooden drum or bundle (coils). An inscription is made on the cable core: JSC Sakcable, cable brand, metric.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For power supply of railway system, including contact systems. Conductor is defined in all macro-climatic areas I, I I, I, IV type of atmosphere standard according to the standard 15150The conductor is twisted from galvanized steel and copper wires not less than 1600m. By request and agreement with the customer conductors of different construction length can be manufactured.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For straining in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesThe copper cores with section 1,5-6mm2 inclusive are produced of single wire of 1 class flexibility, 10-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard IEC 60228:2004. Number of cores in the cable 1,2,3,4,52,5-16mm2-450m; 25-70mm2-300m; 95-240mm2-200min case of supply in bundles the construction length is agreed with the customer. In case of agreement with the customer cables of different construction lengths can be produced
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For laying in ground, open air, in concrete, inside buildings, in cable channels, in electrical stations, in industrial plants and in the commutation systems where there is no danger of mechanical damage of the cable. Because the permissible operating temperature of the conductor is + 90 0C. Core isolation (XLPE) polyethylene provides higher current loadThe aluminum cores with section 2,5-16mm2 inclusive are produced of single wire of 1 class flexibility, 25-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard IEC 60228 : 2004. Number of cores in the cable 1,2,3,4,5.Label attached to wooden drum or bundle, or in case of request of the customer with inscription on top: “JSC Sakcable” cable brand, date of production. Labeling of conductive cores with colors or figures 0,1,2,3,4 with inscription on the top of insulated cores
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
The non-halogen elevated fire hazard cable is designed to transmit and distribute electricity to stationary devices at nominal voltages of 0.660 kW and 1 Hz at 50 Hz. In the air, with anti-ultraviolet radiation protection and where there is no danger of mechanical damage of the cable, as well as for low corrosion activity in the soil (in the trenches), but in a protective tube.Aluminum wires with a cross section of 2.5-50 mm2 are made with single wire first class flexibility up to 70-240 mm2 with twisted multi-wire wires with 2nd class flexibility, standard IEC60228: 2004. At the request of the customer, it is allowed to make multi-wire cross section 16: 50. The number of cores in the cable: 1,2,3,4,52,5-16mm2 450 m 25-70mm2 300 m 95-240mm2 200 m In case of delivery coils (“bundle”), the construction length is agreed with the customer. It is allowed to make cables of different construction lengths.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For fixed connection on electric appliances, equipment, gathering mounts of electric distribution appliances for rated alternating voltage up to 660V frequency 100Hz, or direct current1000V. Used for laying in buildings, channels, tunnels if there is no danger of mechanical influenceThe structure of conductor core is multi-wire and conforms to 3 and 4 class flexibility according to the standard 22483-77. The section of conductor core is 0.75, 1.0, 1.5, 2.5, 4, 6mm2. Number of cores in the cable: 0,75-2,5mm2.-4, 5, 7, 10, 14, 19, 27, 37 4 and 6mm2-4, 7, 10In each bundle by existence of counting pair, which differs in color from other cores. Labeling can be done by means of inscription of separate numbers on insulated cores or distinctive colors of insulation can be used. While numeric labeling the color of figures must be different from the color of the insulation of the core. On the surface of the cover an inscription is made: “JSC Sakcable”, cable brand, section and manufacture year
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For fixed connection on electric appliances, equipment, gathering mounts of electric distribution appliances for rated alternating voltage up to 660V frequency 100Hz, or direct current1000V. Used for laying in buildings, channels, tunnels if there is no danger of mechanical influenceIn each bundle by existence of counting pair, which differs in color from other cores. Labeling can be done by means of inscription of separate numbers on insulated cores or distinctive colors of insulation can be used. While numeric labeling the color of figures must be different from the color of the insulation of the core. On the surface of the cover an inscription is made: “JSC Sakcable”, cable brand, section and manufacture year
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For straining in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesInstallation temperature: -150C. The max. allowable core heating temperature in short circuit with duration of not more than 4 seconds must not be above 1600C The conductor is resistant to 98% relative air humidity under +350C conditions Conductive lobe for long-term allowable heating temperature +700CThe aluminum cores with section 2,5-50mm2 inclusive are produced with single wire of 1 class flexibility, 70-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard 22483-77. Number of cores in the cable 1,2,3,4,5
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For stretching in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forces. While laying the cables in a single layer, they are flame retardantThe copper cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility, accorgind to gost standard 22483-2012. Number of cores in the cable 2,3.in case of supply in bundles the construction length is agreed with the customer. On wooden drum no less than 450m. One batch can contain no more than 20% of cable length not less than 50m.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
The aluminum cores with section 2,5-50mm2 inclusive are made of single wire with 1st class flexibility, 70-240mm2 inclusive with twisted multi-core wires with 2 class flexibility, according to Gost standard 22483-77. Number of cores in the cable 1,2,3,4,5The insulated cores are made of different colors, an inscription is made on the cover of the conductor “JSC Sakcable” cable brand, year of production. Labelling of cores with colors or figures 0,1,2,3,4.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For the connection of light electrical appliances (table and standing lamps, kitchen appliances, domestic vacuum cleaners, office appliances, radios etc.) at low mechanical stresses in households, kitchens and officesThe cores are made with twisted multi-wire copper with not less than 5 class flexibility, according to the standard IEC 60228:2004. Section of the conductor core 0,75-16mm2 Number of cores in the conductor 2,3,4,5The insulated cores are made of different colors, an inscription is made on the cover of the conductor “JSC Sakcable” cable brand, year of production, metric.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For fixed and non-fixed installation in the lighting network , internal wiring under plaster. Also for connecting of different household devices, with expected frequent bending of the conductor The copper cores with cross section 0.75-4.0mm2 are produced with multi- wire class 5 , according to the standard IEC 60228: 2004 Number of cores: 2,3Label attached to wooden drum or bundle, conductor cores differ in colors, where on external surface an inscription is made: “JSC Sakcable” cable brand, year of production, metric.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For fixed installation in the lighting network, internal wiring under plaster. Also for connecting electric household devicesConductor core section 1.5-4.0 mm2 are made with single core 1 class flexibility, according to the Gost standard IEC 60228:2004. Number of cores in the conductor 2,3Insulated cores are made of different colors, an inscription is made on the sheath of the conductor: “JSC Sakcable”, conductor brand, metric.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For lighting and power circuits while stationary laying in electric devices, for inflexible installation in electric devices, machinery, mechanisms and industrial machines for rated voltage up to 450V (for networks 450/750V) frequency up to 400 Hz or permanent voltage 1000V. Is used for laying in empty places of steel pipes and construction structures, where there are not frequent bends of the conductor. The conductor is flame retardant. The aluminum cores with section 1.5-4.0 mm2 inclusive are produced with PPV-1 and PPV-3 with 3,4 class flexibility, according to the standard Gost 22483-2012. Number of cores in the conductor 2,3Label attached to wooden drum or bundle (coils). An inscription is made on the cable: JSC Sakcable, cable brand, metric.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For lighting and power circuits while stationary laying in electric devices, for inflexible installation in electric devices, machinery, mechanisms and industrial machines for rated voltage up to 450V (for networks 450/750V) frequency up to 400 Hz or permanent voltage 1000V. Is used for laying in empty places of steel pipes and construction structures, where there are not frequent bends of the conductor The conductor is flame retardant.The aluminum cores with section 2.5-6.0 mm2 inclusive are produced with 1 class flexibility, according to the standard 22483-2012. Number of cores in the conductor 2,3
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
On derivations of aerial lines and installation in walls of facilities in second and third type atmospheric air according to the standard 15150-69.1. The conductor is twisted by aluminum wires made from aluminum wire by twisting, Compacted. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effectAgreed during receiving order from the customer. Conductor cores are marked with figures 1, 2, 3. An inscription is made on conductor core: “JSC Sakcable” cable brand, manufacture year
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
In aerial lines with rated voltage 10/30kV in second and third type atmospheric air according to the standard 15150-69, including shores and industrial and salty sand regions. 1. The conductor is made from aluminum wire by twisting. Compacted with a special device. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect XLPE insulationagreed during receiving order from the customerAn inscription is made on conductor core: “JSC Sakcable” cable brand, manufacture year.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
JSC SAKCABLE (SAKCABLE)
Georgia
For supply and distribution electricity to power and lighting networks with variable voltage 0,660 / 1 kV . Used in the main overhead power line and in residential branching.1. The conductor is twisted by aluminum wires and it is compacted. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect 3. Neutral conductor is twisted with aluminum solid wires or aluminum wire with steel core and uninsulatedagreed during receiving order from the customerMarking of conductor cores with figures 1, 2, 3. On one of the conductor cores an inscription is made: “JSC Sakcable”, cable brand, manufacture year
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
In coal mining, gas-and-oil producing industry, metallurgy, engineering, construction industry, sea and river transport. It can be used as lightning protection at high voltage lines.Steel cable (rope) is made of galvanized steel wire (number of wires 19) twisted as single or in layers and is covered with anticorrosive temperature resistant lubricant material. agreed with the customer. Deviation from length is possible: up to 400m +5%, above 400m +20%.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For transmission of electric power in overhead electric networks, used in I and II type atmospheric air provided on land and sea in all microclimatic regions of the land according to standard 15150.The conductor is made from copper wire by twisting. In case of twisting in layers, the twisting is performed in opposite directions. Half side of the outer layers is right direction.indicated in the table. By request and agreement with the customer conductors with different construction length can be manufactured
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
AS: For transmission of electric power in overhead electric networks, used in I and II type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (1.5mg/m3) and in all microclimatic regions of the land according to standard 15150-69. ASKP and ASKS: Used on the seashores, in industrial regions, salty sandy regions, as well as regions adjoining them in II and III type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (1.5mg/m3) and Chlorine salt not more 200 mg/m2 ,in all microclimatic regions of the land according to standard 15150.The conductor is made by twisting of the steel conductor and aluminum wire. Regarding to the structure, the steel core is single-wire or twisted multi-wire. In case of twisting in layers, the twisting is performed in opposite directions.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For transmission of electric power in overhead electric networks, used in I and II type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (150mg/m3) and according to standard 15150-69 in all microclimatic regions of the land.The conductor is made of aluminum wire by twisting. In case of twisting in layers, the twisting is performed in opposite directions. Indicated in the table. According with customer’s request and agreement conductors with different construction length can be manufactured.
Request for a quoteResults for
Wires - Import exportNumber of results
23 ProductsCountries
Company type
Category