Results for
ALNOR VENTILATION SYSTEMS LTD
Poland
The FDA212 square fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal sizes 160x160 – 1000x500 mm. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GRONBACH
Germany
We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.
Request for a quoteMETMANN
Spain
AD SMALL PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD SMALL PREMIUM evaporative air conditioners, develop an air flow from 5,760 m3/h to 17,145 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 67m2 to 255m2
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite thanks to the insulating properties of EPP. Manifold boxes are designed for distribution of 75mm semi-rigid ducting around. The number of connectors varies depending on the user's specifications: 6-13 connection spigots.
Request for a quoteDEKS INDUSTRIES EUROPE
United Kingdom
Use as standard Dektite®, or when retrofit is required, cut and fit around pipe and join with clips (supplied) Ideal for HVAC installations where you may need to retrofit the flashing (ie cut to fit over the pipe and reseal) This product is 2 in 1, the Swiss Army Knife of HVAC flashings - Available to cover sizes up to 760mm pipe diameter. Available in Black & Grey EPDM and Red High Temperature Silicone.
Request for a quoteERF GROUP
Turkey
Air Handling Unit Production with 800 - 100,000 m3/h flow rate. 20 different models and a wide selection. Ability to be disassembled thanks to the modular system Easy pointing and mounting Tolerant values and maximum efficiency in the selection of fon, heater, cooler, filters, dompers, electric motor, heat recovery device and muffler.
Request for a quoteINTAX TRADING SRL
Romania
CONNECT TC100S Mix Flow Inline Blower CONNECT series is a mixed flow inline exhaust fan in various sizes. Specially designed for installing ventilation systems with high pressure, strong airflow and low noise levels. Energy Saving motor with ball bearing for log time operation. Removable body for easy cleaning, without the need to move the ducts. Mix Flow Inline Blower CONNECT are powerful enough to ventilate multiple areas with a single unit for one or more rooms of varying sizes Quality motor: Ball bearing motor Auto cut-off fuse built in motor Silicon steel lamination Pure copper winding ProtectionIPX4 Input/ Output Ducted Diameter (mm)97 (for 100 mm ducting tubing) Electrical ClassificationClass 1 Indoor/ Outdoor SuitabilityFor Indor Use Only Climatic ClassificationTropical Condition Gross Size (mm)300x180x236 Net Size (mm)297x177x234 Gross Weight (kg)1.99 Net Weight (kg)1.78 Speed selector included✓ Speeds2
Request for a quoteINTAX TRADING SRL
Romania
This fan is ideal for wall and ceiling installations, in bathrooms, kitchens, and spaces that require ventilation, silent, robust, and very efficient. Dual Suction Robust shutter included Wall and ceiling installation Motor thermal protection High-performance engine Available connection diameters: 100mm Model: Standard White Material: LG ABS Technical specificationRING 100 SW ColourMattte White Voltage (V)220 – 240 Power (W)15 Air volume (m³/h)80 Connection Diameter (mm/ inch)100/4” Noise level (dB)33 ProtectionIPX4 InstallationWall and ceiling TimerNo ShutterYes Suction TypeFrontal and Perimeter suction Gross Size (mm)155x155x110 Net Size (mm)150x150x106 Gross Weight (kg)0.700 Net Weight (kg)0.540 EAN5949096154516
Request for a quoteResults for
General ventilation systems - Import exportNumber of results
13 ProductsCompany type