Gas-fires - Import export

Eratec designs, manufactures and sells metal fibre gas burners. The Eratec metal fibre burner is an emitter with a refractory stainless steel combustion head on a Bekinit® knitted metal fibre radiating surface. The combustion head is equipped with an electronically controlled air/gas premixing system.

ELECTRIC HEATER FAN TDS 50 EPowerful mobile heating in a trice The robust electric heater fan TDS 50 E is the powerful heating solution for the building industry and agricultural sector, for the catering trade or holiday home. With its hard-wearing double-walled housing, the TDS 50 E is on the one hand flexibly prepared for different operating conditions, and on the other hand offers good thermal insulation. Designed for a mobile change of location, the heating device can be transported conveniently using the practical carrying handle. Unlike directly fired gas or oil heating devices, the electric heater fan neither consumes oxygen nor produces combustion gases. Therefore, it can be used basically everywhere provided there is a socket – particularly for temperature control in unheated rooms.

TDS 50 Electric Fan Heater The TDS 50 electric heater provides a heating performance between 4.5 kW and 9 kW in 3 stages (stage 1 only fan). Furthermore the TDS 50 has an integrated thermostat for continously adjusting the desired temperature. In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series dont consume oxygen or produce combustion gases. Because of that this devices can be used everywhere, in particular for temperature control of unheated interiors. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 50 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory

OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Because in comparision to direct fired gas or oil heaters dont consume oxygen and produce no combustion gases, they are well suited for temperature management of unheated inside rooms, workshops or garages. Thanks to the integrated thermostat control the produced warm air flow can be adjusted continuously to the desired temperature. If needed, the heating elements of the TDS 30 R switch on thermostatic controlled additional to the constant fan. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 R is suitable for uses in enclosed rooms Easy transportable and easy to use

ESD "Tiras" is used for emergency stop of fire extinguishing (gas, powder, aerosol and other).

MRD "Tiras" is used for manual launch of fire extinguishing (gas, powder, aerosol and other).

EAD "Tiras" Ex is used for emergency stop of fire extinguishing (gas, powder, aerosol and other) in explosive areas.

MRD "Tiras" Ex is used for manual launch of fire extinguishing (gas, powder, aerosol and other) in explosive areas.

ECD "Tiras 1X" is intended to control one direction of fire extinguishing (gas, powder, aerosol). It can operate in autonomous mode or as part of fire alarm systems "Tiras PRIME" or "Tiras PRIME A".

Electric or gas-fired furnaces, with dimensions and specificities according to your needs Top quality insulation using fibre materials and lightweight insulation bricks Precisely determined power rating Sturdy, precision construction Door fitted on adjustable hinges and fitted with seal Simple and rapid closing system (locking options) Wound resistances, mounted on porcelain tubes to ensure homogeneous radiation Flue installed in the vault & inspection hatch in the door Temperature control system (programmable controller adapted according to the size of the oven and your cooking)

AVK tapping saddles can be installed on cast iron, copper, steel, asbestos cement and plastic pipes. The rubber lining of tapping saddles guarantees a leak-tight connection, even with rough pipes surfaces. AVK uses rubber lining with a special trapezoid wafer design with rounded tops where other use a standard square profile. The rounded trapezoid design provide superior sealing characteristics. AVK REWAG tapping saddles are suitable for water, gas, industry, sewage and fire-fighting segment. Our tapping saddles are easy to install, maintenance-free and designed for long life. The AVK tapping saddles can be used within the markets: industry, shipbuilding, gas, sewage, water and firefighting.

— Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization — Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources — High supply reliability thanks to self-firing function — Robust, reliable and durable — Versatile design for use with different fuel types and as a multi-fuel firing unit (oil, gas, biogas, hydrogen) — Ideal for combination with combined heat and power units or gas turbines

The UT-H is suitable for processes in high temperature and pressure ranges. The boiler can also convert to climate-neutral fuels which makes it a future-proof solution. — Very high efficiency values for low running costs — Versatile operation for the manufacturing industry and district heating grids with temperature levels up to 225 °C — Customer-specific design and future-proof technology — User-specific control which offers integration of other control systems and remote monitoring — Custom designs for heat recovery and hybrid boilers — Proven and reliable construction Made in Germany — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

The heating boiler UT-L offers high performance and is extremely compact. The design complies with the Gas Appliances Regulation. — Very high efficiency up to 105% for optimised energy costs — Compact design for easy positioning and effective use of heat — Flexible application and low return flow temperature of 50 °C possible — Specific control concept and optional real-time monitoring — Future-proof heat supply and options for CO2-neutral operation — Proven and durable Bosch system from a single source — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

The various output sizes and temperature ranges up to 190 °C of the UT-M enable flexible operation for countless process heat and heating applications. — Efficient heat and process heat for low running costs and emissions — Compact design for easy positioning and quick heating — Flexible use for industrial, commercial and district heating applications with temperatures up to 190 °C — Project-specific control solutions and optional real-time monitoring — Complete system from a single source, low-emission or CO2-neutral customer-specific operation possible — Proven and maintenance-friendly construction for a long service life and reliability — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

— Three-pass boiler for a small to medium steam demand of 200 to 2,000 kg/h at up to 16 bar — Lower space requirement for easy installation — High level of efficiency due to the integrated economizer — Versatile design for use with different fuel types and as a multi-fuel firing unit (oil, gas, biogas, bio-oil, hydrogen, special fuels) — Intuitive touchscreen operation and PLC control — Easy wiring on site thanks to plug-in connections

Electric steam boilers are a good choice for the future. It is a great alternative to a gas-fired steam boiler. We supply various electric steam boilers from the German brand Certuss and the Danish brand AB&Co. Certuss electric steam boilers are compact , economical and easy to operate . They are ready-to-use steam generators with a built-in supply water reservoir and water supply pump. We now also offer an electric steam boiler for greater industrial steam demand. The AB&Co electric steam boilers can handle a capacity of up to 1500 kW. Would you like us to think along with you about making your steam system more sustainable ? Then contact us . Several companies chose an electrical solution before you. Read more about, for example, our collaboration with Nutricontrol .

EMERGENCY MANAGEMENT Because time does matter Home Emergency Management EMERGENCY MANAGEMENT Because time does matter Context In case of an emergency, like lost person, gas leak, nuclear issue, fires, time and efficiency are critical factors in applying the right reaction. The right information at the right time is crucial to apply the appropriate action and will significantly reduce the risk of failing the mission. Workaround solution Efficient solutions are already used with success by authorities. With new technologies, every process can be optimized, improved to be totally efficient. Our solution Through ALX system, emergencies could quickly proceed to deployment of UAV and other equipment, to collect information, immediately share the information with remote control center, with the advantage of being totally focused on the mission instead of taking care of the UAVs flights. Sample use cases Lost person, in woods, mountains, … Fires Nuclear issues Gas leaks

The VA 40 variable area flowmeters are suitable for measuring liquids and gases The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly and observe the medium. The suitability for measuring the flow of gases in accordance with the DVGW G260 process sheet has been certified by the DVGW testing station at the Gas-Fired Thermal Institute in Essen.

Features 1.All steel construction raised basement; 2.Full downdraft airflow style, ensuring turbulence-free airflow path; 3.Illumination brightness reaches 1200 lux; 4.Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); 5.Sheet metal is processed to European standards; Standard Configurations -Basement: all steel construction raised basement, 5-row grating; -Fan unit: one 7.5kw intake fan, one 7.5kw exhaust fan; -Heating: Riello RG5D burner, with heat exchanger; -Lighting system: upper lights are 14*4*13W LED light tubes, lower lights are 10*4*13W LED light tubes; -Wall panel: sheet metal is molded by one-step process, four-side edge banded rockwool insulated wall panel, thickness 50mm -Ceiling structure: 14 pieces of precision punched steel panels -Roof panel: double-skin insulated roof panel -Electric control: imported electrical components, phase loss protection, overheat protection and overload protection

VESTA oven is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm

VESTA oven – is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm.

VESTA oven – is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm.

VESTA oven is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm

Features -All steel construction raised basement; -Full downdraft airflow style, ensuring turbulence-free airflow path; -Illumination brightness reaches 1000 lux; -Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); Standard Configurations -Basement: all steel construction raised basement, 2-row grating+3-row checkered plate; -Fan unit: one 7.5kw intake fan, one 5.5kw exhaust fan; -Heating: Riello G20 burner, with heat exchanger; -Lighting system: upper lights are 10*4*18W LED light tubes, lower lights are 8*2*18W LED light tubes; -Wall panel: Rock wool insulated wall panel, thickness 50mm; -Ceiling structure: punching ceiling frame; -Roof panel: single-skin galvanized steel roof panel; -Electric control: phase loss protection, overheat protection and overload protection, direct starting of motor;

Features -All steel construction raised basement; -Full downdraft airflow style, ensuring turbulence-free airflow path; -Illumination brightness reaches 1000 lux; -Oil fuel heating (gas-fired heating, electric central heating, hot water heating and steam heating are optional); Standard Configurations -Basement: all steel construction raised basement, 2-row grating+3-row checkered plate; -Fan unit: one 5.5kw intake fan, one 5.5kw exhaust fan; -Heating: Riello G20 burner, with heat exchanger; -Lighting system: upper lights are 8*4*18W LED light tubes, lower lights are 8*2*18W LED light tubes for option -Wall panel: EPS insulated wall panel, thickness 50mm; -Ceiling structure: welded ceiling frame; -Roof panel: single-skin galvanized steel roof panel; -Electric control: phase loss protection, overheat protection and overload protection, direct starting of motor;

The oven specially designed for bakeries who want productivity, quality product, homogeneous baking characteristic and more energy saving To ensure long term usage, oven burning chamber is produced by stainless steel Air flow channels are adjustable that inside of the baking chamber. So hot air reach equally to all surfaces and obtains equal baking, regardless of up or down floor, right or left side of the tray Required steam quantity is always ready by the newly designed powerful steam generator. Electric, gas, diesel or wood fired system available for heating system. Thick isolation material around the oven and observation window with double glass keeps reduce the heat loses and provides equal heat distribution in the baking chamber Temperature level in the baking chamber automatically controlled by a electronic system and the heat level always kept as standard. By the way homogeneous baking is guaranteed. Reaching the baking temperature is very fast and this save energy and time.

Gufo HG gas fired heater is designed as an economic heating solution to be used in the winter gardens of restaurants, cafes, hotels and offices, smoking areas and terraces. Impact, moisture and wind resistant stainless steel chassis. Resistant to 1100 degrees and thermal shocks, having 98% heat conduction and aesthetic ceramic glass. With the low or high step burning system, the desired temperature comfort can be provided easily according to the temperature of the air. Built-in remote control for convenient and easy operation. Technical Features 1. Step Power 7 kW 2. Step Power 12,5 kW Heating Area 25-50 m² Natural Gas Consumption 1,3 m³/saat Recommend Hanging Height 2,2 m Natural Gas Pressure 20 - 55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V