Results for
BÜCHI AG
Switzerland
Mobile gas scrubber (volume scrubbing liquid) : 6, 10, 20, 50, 100 liter Mobile gas scrubber (column diameter): DN 50, 70, 100, 150, 200 Stationary gas scrubber (volume scrubbing liquid) : Customized according to process requirements Stationary gas scrubber (column diameter): DN50 up to DN600 Pressure: -1.0 (FV) to +0.5 bar Temperature exhaust gas: -60 °C to +200 °C Temperature scrubbing liquid: 0 °C to +80 °C Material: Borosilicate glass 3.3, PTFE, ETFE Gas scrubbers are used to neutralize corrosive exhaust gas from reactors. Depending on the scrubbing liquid, they can be used for caustic or acidic vapors. Gas scrubbers are equipped with an ETFE lined, corrosion resistant magnetic coupled pump. The flow rate of the scrubbing liquid can be controlled with the built-in reducing valve. The scrubbing liquid temperature is maintained by a spiral cooler in the liquid circuit.
Request for a quoteWESSEL-UMWELTTECHNIK GMBH
Germany
Industrial air scrubbers are used to purify the exhaust air of pollutants, for example in the chemical or pharmaceutical industry. As soon as the exhaust air meets the legal requirements for clean gas values, it can be returned to the environment. Absorptive exhaust air purification by waste gas scrubbers is a frequently used technology. Gas scrubbers are suitable for removing pollutants, aerosols and dust from the exhaust air. Especially watersoluble exhaust air components are separated with high efficiency.
Request for a quoteHAMON
Belgium
ExxonMobil’s Wet Gas Scrubbing (WGS) technology allows refiners to reliably meet tough FCC emission regulations with well-proven technology.In 2002 and 2003, ExxonMobil Research and Engineering Company (EMRE) and Hamon Research-Cottrell (HR-C), entered into licensing and sublicensing agreements to provide ExxonMobil’s Wet Gas Scrubbing technology to sublicensees of HR-C.Expect these advantages:Can avoid costly CO boiler upgrades with allowable scrubber pressure drops as low as zero inches of water, Takes advantage of HRC’s almost 100 years of experience and global leadership position in providing air pollution control equipment to a wide range of industries, including refineries.Maximizes cat cracker availability - scrubber run lengths match longest FCC up-time in the industry, Meets or exceeds toughest particulate and SOx emission regulations, Produces environmentally benign wastewater safe for direct discharge, Collected catalyst suitable for direct low cost disposal
Request for a quoteTHOLANDER ABLUFTTECHNIK GMBH
Germany
Counter current scrubbers offer a competitive solution for "single substance problems". With our design we can ensure that contaminants will be removed efficiently from the waste air. Efficiency Little space requirements Separation result > 99% with heavily loaded waste air Little pressure drop because of heavy-duty packing material Easy to maintain user interface Dosing of chemicals as needed Optimized energy consumption Reliable and fully automated operation Level switch in pump sump Dry run protection Control of nozzle pressure Automatic, data controlled chemical dosing Automatic desalination Frost protection for outdoor installation Well thought out design Little pressure drop Little risk of clogging through choice of right packing material Plant made of corrosion-resistant and chemical-resistant FRP Big flexibility Optimized for varying raw gas loads No adjustment phase 30 years of experience Active references of each size Worldwide delivery, installation and service
Request for a quoteTHOLANDER ABLUFTTECHNIK GMBH
Germany
Multiventuri scrubbers are suitable for the separation of adhesive aerosols and for fine dust in humid waste air as these filtrating separations lead to adhesion, clogging and thus to irreversibel high filter resistance. In a wet separating process, the particles are washed out and thus cannot adhere. Reliable and automatic operation Automatic elutriation Automatic washing of separated elements Automatic discharge of the Ausschleusung der nicht absetzbaren ölhaltigen Stäube Level switch in pump sump Dry run protection Control of the nozzle inlet pressure Frost protection for outside installation Advantages Suitable for hot waste air Easy to maintain user interface Big flexibility with unsteady raw gas load Compact execution Durable construction Plant components made of corrosion and chemical resistant FRP 30 years of experience Active references of each size Worldwide delivery, installation and service
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CTRA
Tunisia
CTRA produces a wide range of boiler-made equipment for chemical processing, including reactors, columns, decanters, mixers, gas coolers, gas scrubbers, odour scrubbers and absorbers, as well as their internal equipment. All this boilerwork is designed by our departments to meet the dynamic and hydrostatic loads required by the various processes. Thanks to the development and mastery of materials, CTRA is able to design a wide range of boilerwork, up to 6 m in diameter, to withstand the most corrosive fluids, whether they operate in a vacuum or at high pressure, from 50°C to 200°C.
Request for a quoteENNOX BIOGAS TECHNOLOGY GMBH
Austria
Since the implementation of the Kyoto treaty in February 2005 the world has seen a widespread development and tightening of regulations governing greenhouse emissions. The Kyoto treaty has provided an incentive for industrialized and developing nations alike to invest in the reduction of emissions. To get the required CO2 certificates out of JI- and CDM projects it is necessary not only to ensure the correct and sustainable treatment of the methane gas according to local regulations, but also to reliably collect and save the data in a manner which inhibits any possible manipulation. ennox delivers the required gas scrubbers, pressure stations, flare and additional measurement and recording components for your JI/CDM- project.
LUTZ PUMPEN GMBH
Germany
The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B80 HME series is a design with bearingless cantilever construction that is directly coupled to the IEC Motor. Specially designed for plant engineering and confined installation conditions. It can be operated in dry installation next to the tank, thus facilitating access for maintenance and repair work. The pump is suitable for pumping /circulating neutral, corrosive and mechanically contaminated liquids. However, it can also be used in stationary installation in the chemical industry and process engineering, in surface and electroplating technology and in gas scrubbers. * temporarily also possible in dry running * directly coupled in bearingless cantilever design * available in immersion depths from 275 - 450 mm Features & Advantages * Service friendly dry running installation * Extremely low vibration and wear operation * Self-centering alignment in the bearing shell * All wetted parts made of corrosion resistant plastic
Request for a quoteCTP CHEMISCH THERMISCHE PROZESSTECHNIK GMBH
Austria
CTP's wetabsorber: After the oxidation of for example halogenated hydrocarbons, the corresponding hydrogen halides and elemental halogens emerge. Inorganic pollutants are efficiently removed from the waste gas by wet gas purification. The combination of exhaust gas cooling (quench) and waste gas purification (scrubber) is ideal for use after a convential APC system. Maximum cleaning efficiency High safety standard High availability Low maintenance costs
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
The chemically stable and high-temperature resistant nickel-chromium-molybdenum alloy 2.4605 (alloy 59) is mainly used in the chemical industry, flue gas desulphurisation plants, paper industry. Alloy 59 is a nickel-chromium-molybdenum alloy with excellent corrosion resistance and high mechanical strength. The alloy has excellent resistance to both oxidizing and reducing media, and possesses superior resistance to chloride pitting and stress corrosion cracking. The alloy is widely used in the most severe environments. Some applications include: flue gas scrubber components, bleach plant and digester components for the pulp and paper industry, sour gas handling equipment, sulfuric acid coolers, waste incinerators and seawater equipment. Please note that we have a minimum order value of £10,000.
Request for a quoteNANJING LAB
United Kingdom
PFA gas scrubbing bottle is a vessel for washing impurities in gas. It absorbs impure gas by bubbling (dissolving or due to chemical reaction) through a selected suitable liquid medium, so as to wash away impurity gas, and get the purify gas. During the design process, the tetrafluoro balls are surrounded by small holes. Pay attention: 1. The gas scrubber is filled with the selected liquid to scrub the gas and remove the moisture or other gas impurities. When using, pay attention to the flow direction of the gas, the inlet pipe and the outlet pipe cannot be reversed; 2. The gas washing bottle cannot hold alkaline liquid detergent for a long time. After use, pour the detergent into a reagent bottle with a rubber stopper and store it for later use, and clean it with water. The bottle can also collect gas and calculate the volume of gas.
Request for a quoteHAMON
Belgium
The air from the Granulators and the Coolers contains urea dust that is entrapped in Hamon’s scrubbers. In these industrially proven impact type scrubbers, efficiencies are very high and dust concentrations lower than 20 mg/Nm3 can be achieved at the stack outlet. The total amount of urea collected by these scrubbers is recycled, for reconcentration, to the process.The same process is used to capture NH3 from the gases at the outlet of the Fertilizer Industry.
Request for a quoteResults for
Gas scrubbers - Import exportNumber of results
15 ProductsCountries
Company type