Gas pressure springs - Import export

Individual filled gas springs are excluded from replacement. Gas springs are maintenance-free, self-contained systems that are filled with nitrogen under high pressure. For end-of-travel damping and lubrication, a defined amount of oil is also contained inside. The gas springs contain a nonreturn valve in a threaded pin on the pressurised pipe, which allows the pushing force to be lowered at a later time. Gas pressure springs in the sizes 04/12 and 06/15 must be stored and installed with the piston rod extending downwards. As of size 08/19, storage and installation in any orientation is possible. Keep in mind, however, that end-of-travel damping is effective only when the piston rod extends downwards. As a consequence of the physical properties when filling a gas spring, a tolerance range of ±5 % results for the rated pushing force. Gas springs are filled with nitrogen under high pressure and under no circumstances should they be opened or overloaded.

Lift-up floor scale with practical lifting frame - for easy hygienic cleaning. Due to its low design, products can be easily applied to the iL Special 2000FF/MP. But this platform is truly remarkable when it comes to higher demands on hygienic cleaning. For this purpose the deck can be lifted by a single person. This movement is supported by a gas-pressurized spring which is balanced in such a way that the deck can hold its position.

A showcase in a class of its own that sets standards in quality and functionality. High-quality processed and anodised aluminium profiles or, on request, powder-coated in RAL colours. Single-pane safety glass, permanent ventilation, scratch-resistant and magnetic rear wall in aluminium silver, vandalism safety locks with patented frost protection and gas pressure springs with secure 85° open position, optional LED lighting - the TN series leaves nothing to be desired. Whether as a wall or floor model, in foyers or in front of buildings. And everything with ten years warranty!

The CEE floor tank 6620A consists of a housing made of stainless steel 1.4301 (3 mm) and a 20 mm thick cover made of anodized aluminum that can be closed with a tool. When closed, the CEE floor tank is not waterproof. In the outdoor area, a drainage pipe must be provided on site for the housing to be drained. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in plugs. Other equipment variants on request.

The CEE floor box 6610A consists of a housing in stainless steel 1.4301 (3 mm) and a lockable, 20 mm thick lid made of anodized aluminum. When closed, the CEE floor box is not waterproof. In the outdoor area, a drain pipe must be provided on-site to drain the housing. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in connectors. Further configuration variants on request.

The table showcase has a 250 mm high glass cover made of ESG safety glass, under which you can show off your precious items to perfect effect. Gas pressure springs make it easy to open the hood. It is secured by two locks. The table showcase is available in the profile colours silver and black. You also have the choice between three different models. There is a choice of feet in profile colour, a base cabinet including two sliding doors and integrated lock or a plinth. The table showcase is delivered fully assembled. The blue dust plateau and lighting are not included in the scope of delivery, but can be offered on request.

Manual barriers with different models and design are an integral part of our product variety Swiveling gates Gates can be swiveled horizontally with steel pipe, without supporting post Swing barrier Barrier swings horizontally with self-engaging lock Swing barrier Swing barrier with steel barrier arm or aluminium-barrier arm with or without supporting post available Access barrier Access barrier with counterweight and supporting post or swing post Manual barrier Access barrier with gas pressure spring with supporting post or swing post Blocking width 7000 mm! Different locking mechanism for padlock, with triangular lock, with profile cylinder lock or triangular and profile cylinder, also with forced locking available

The locking gas strut, also called gas pressure springs, gas dampers or gas pressure dampers, aid the ergonomics and comfort for conveniently safely changing seated and lying positions, for effortlessly and precisely operating machine covers and are used in many other applications.

The gas strut, also called gas spring, gas pressure springs, gas dampers or gas pressure dampers, will solve your individual requirements for opening, closing, tilting and damping flaps, tables, seats or loungers thanks to our decades of experience. Gas struts take care of the controlled movement sequence and offer the following advantages: Simple installation Compact design Integrated damping Definable spring characteristic and extension speed

Durable with high operational reliability. Powerful. Design features: • robust construction • automatic product feeding • Vacuum box extraction • Product-dependent carton suction • Carton erection in the chain • All-round product inserters • Main shaft drive • Frequency controlled three-phase drive • encapsulated gearbox • automatic chain tensioner • all product-carrying components made of stainless steel • Fast format adjustment • Gas pressure spring-loaded protective doors made from Makrolon • PLC control Additional devices: • Hot glue seal • Combined hot glue and plug closure • Special plug lock • Cardboard storage tapes with automatic magazine loading • Embossed printer for signing a flap • Coding (inkjet / laser), blind embossing • Code reader with or without folding box ejection device • Equalization for powdery or granulated products • Upper runner to support the insert easily deformable products • Inserts for brochures booklets, spoons etc.

Design features: solid construction Longitudinal sealing rotary foil wrapping head Main shaft drive frequency-controlled three-phase drive Rotary shear cut knife Film removal control Product insertion control continuous product transport through the folding switches continuously working forehead sealing quick format adjustment Protective doors made from Makrolon, relieved of gas pressure springs PLC control Additional devices: Tear-off thread with tip cut Photoelectric print control Marking printing devices Coding (inkjet / laser) two film rolls automatic reel change Brochure and sample inserts external control devices Vibration equalization for granular contents Roller and belt leveler for powdery products Height sensing and ejection station for container completeness control Processing of heat sealable paper Discharge stack and turning device full-surface, double-sided face sealing oversized film roll Servo drives Machine mobile

ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd specialize in custom manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Ming Xiao Manufacturing Co., Ltd custom produce high quality lockable gas springs struts for world customers. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...

Gas spring that are operated with a button.

The gas pressure regulator of the RTBK type is designed for automatic regulation of gas pressure “after itself” at the facilities of high pressure gas pipelines, such as gas distribution stations, gas treatment and dehydration plants, gas fields, compressor stations, etc. The operating medium is natural gas and other gases that are not aggressive to regulator materials. Inlet working pressure: from 12 to 100 bar Output working pressure: from 1 to 12 bar Depending on the order, the modular regulator of the RTBK type can include the following elements: General-purpose body based on which the modular type regulator is built. Active module. Monitor module. Built-in shut-off valve. Shut-off valve as a separate element connected in series with the regulator body. Noise reduction module. And other technical combinations of modules and components. More information on our website.