Gas cooling - Import export

What you can expect with an APROVIS FriCon: - FriCon systems are ready for connection - The FriCon removes the moisture from the process gas by dropping below the dew point temperature - FriCon gas heat exchangers operate at elevated pressure, ambient pressure and negative pressure - Condensate formation in downstream gas lines is avoided - Suspended matter is separated - The FriCon is available in different sizes and designs

Features Flat spray pneumatic nozzle producing semi-fine atomization with a mean droplet diameter of 80 μm or more (*3). Clog-resistant design due to large free passage diameter is suitable for spraying factory effluents and waste water. Simple structure, easy maintenance. *1) Measured at compressed air pressure of 0.1–0.4 MPa (ca. 1 bar – 4 bar) and liquid pressure of 0.1–0.5 MPa (ca. 1 bar – 5 bar). *2) Free passage diameter of nozzle orifice for DOVVA-G 70° spray angle type. *3) Measured by Laser Doppler Method. Applications Denitration: Gas cooling Moisture control: Flue gas Combustion: Waste water

Gas-cooled weld head for applications with extreme narrow space requirements as e.g. in the semiconductor industry. Specially designed to weld micro-fittings. Unique construction, including specifically directed gas routing to improve gas coverage and material selection resulting in a high duty cycle even without water cooling. — Extreme narrow / compact design — Simple design allows easy to maintain — Weld Head compatible with control element (start/stop kit with status display) — Arc Machines Model 9-500 cassettes will fit too

Our latest series of gas-cooled and compact weld heads. They are for smaller outside diameters with a narrow handle for tighter access conditions. Weld head type \ Field of application mm \ inch \ weight OSK 21 CS \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 0.8kg OSK 38 CS \ OD 3.17 - 38.1mm \ 0.125" - 1.500" \ 1.2kg —-- Our new generation of compact weld heads for high duty cycle requirements have watercooled clamp housings and clamping levers. Both OSK CW weld heads are operated using a sharable handle and cable assembly. Weld head type \ Field of application mm \ inch \ weight OSK 21 CW \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 1.0kg OSK 38 CW \ OD 3.17 - 38.1mm \ 0.125" - 1.500" \ 1.4kg Only one drive unit is needed for all C and CW weld heads. —-- OSK 21 CB gas-cooled weld head with clamping block for tube-totube connectons incl. setting gauge for pipe Weld head type \ Field of application mm \ inch \ weight OSK21 CB \ OD 3.17 - 21.3mm \ 0.125" - 0.839" \ 1.0kg

Our latest series of 3 gas-cooled weld heads technical optimized and in an new design covers the tube size ranges from 6mm – 114.3mm / 0.250” - 4.500”. Unique construction and material selection allows a high duty cycle even without water cooling. The weld heads are one of the narrowest on the market and have a ‘quick latch’ system for retaining the collets. For the high duty cycle applications we also offer the gas-cooled S series weld heads in a water-cooled SW-version (the overall width remains unchanged). Full water-cooling of the lower clamp housing. Also available as an upgrade for standard OSK S weld heads. Weld head type \ Field of application mm \ inch \ weight OSK 53 S + SW \ OD 6 - 53mm \ 0.250" - 2.087" \ 2.1kg OSK 76 S + SW \ OD 6 - 76.2mm \ 0.250" - 3.000" \ 2.6kg OSK 115 S + SW \ OD 9.53 - 114.3mm \ 0.375" - 4.500" \ 3.4kg OSK 170 GW \ OD 50 - 168.3mm \ 1.969" - 6.626" \ 7.5kg

Engines for combined heat and power plants are operated with different fuels, including hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels. In an exhaust gas heat exchanger, the hot exhaust gas from the CHP engines or CHP gas turbines is cooled, in the process heating water, a water-glycol mixture or thermal oil. This thermal energy can be used in a local or district heating system or for other industrial purposes.

What you can expect from an APROVIS process gas heat exchanger: - Suitable for low and high temperature ranges - Operating pressures up to 160 bar - Compact design for use in confined spaces - Suitable for a wide range of gases - Implementation of customised solutions

BORSIG patented steam superheaters are suitable for steam pressures of up to 160 bar (16,000 kPa). The steam superheaters are arranged direct in line after the waste heat boilers which are connected to the secondary reformer or reformer – depending on the process. The steam superheater can be provided as two stage or one stage, horizontally or vertically arranged. The final design arrangement is determined by the process requirements. We have delivered steam superheaters for superheating saturated steam at a pressure stage of 12,500 kPa from 328 °C to 531 °C by cooling down process gas from 723 °C to 355 °C.

Refrigerant gas R141b solvent, used in cleaning systems and as a refrigerant under the names R-141b or HCFC-141b. 1,1-Dichloro-l-fluoroethane is a haloalkane with the formula C2H3CI2F. It is one of the three isomers of dichlcrofluoroethane. it's a replacement for R11.

Frcgen* R-22 is an HCFC refrigerant that operates with high pressure but low compressor displacement. Frcgen# R-22 is popular in residential, commercial and industrial applications. Frogen# R-22 is also used as an intermediate to produce fluoropolymers and as a blowing agent in rigid foam applications.General InformationASHREA ft R-22Class HCFCRefrigerantT Pure FlutdTypeLubrication Mineral OilCharging _ .....The system must be evacuated before charging.Use of R-22 is being phased out glcoally- consider the use of Frogen# R407C, Frcgen* R422D. or FrogenG R507. Nonflammable at ambient temperature and pressure, ether-like smell. Always use in accordance with the Material Safety Data Sheet <MSDS).

Product 12: CTP's wetabsorber: After the oxidation of for example halogenated hydrocarbons, the corresponding hydrogen halides and elemental halogens emerge. Inorganic pollutants are efficiently removed from the waste gas by wet gas purification. The combination of exhaust gas cooling (quench) and waste gas purification (scrubber) is ideal for use after a convential APC system.

Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 43 Cm / 53 Cm (GN 1/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Digital Control Panel Electrical Resistor Automatic Defrost Special Water Evaporation (Hot Gas) Stainless Steel Legs Adjustable For Height Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC %65 Humidity

Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 43 Cm / 53 Cm (GN 1/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Suitable for GN Cups 2/1 & 1/1 Special Design Cooling System to Prevent Drying of the Products Digital Control Panel Hot Gas Automatic Defrost Stainless Steel Legs Adjustable For Height Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 32oC & % 65 Humidty P: Suitable for 40x60 Trays

60 mm Insulation Thickness Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 65 Cm (GN 2/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Control Panel Automatic Water Evaporation System Electrical Automatic Defrost Stainless Steel Legs Adjustable For Height Automatic Lighting Inside When Door is Open Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC & % 65 Humidity

Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 43 Cm / 53 Cm (GN 1/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Digital Control Panel Electrical Resistor Automatic Defrost Special Water Evaporation (Hot Gas) Stainless Steel Legs Adjustable For Height Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC %65 Humidity

Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 43 Cm / 53 Cm (GN 1/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Digital Control Panel Electrical Resistor Automatic Defrost Special Water Evaporation (Hot Gas) Stainless Steel Legs Adjustable For Height Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC %65 Humidity

Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 43 Cm / 53 Cm (GN 1/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Digital Control Panel Electrical Resistor Automatic Defrost Special Water Evaporation (Hot Gas) Stainless Steel Legs Adjustable For Height Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC %65 Humidity

Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 43 Cm / 53 Cm (GN 1/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Digital Control Panel Electrical Resistor Automatic Defrost Special Water Evaporation (Hot Gas) Stainless Steel Legs Adjustable For Height Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC %65 Humidity

Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 43 Cm / 53 Cm (GN 1/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Digital Control Panel Electrical Resistor Automatic Defrost Special Water Evaporation (Hot Gas) Stainless Steel Legs Adjustable For Height Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC %65 Humidity

Inside Body AISI 304 2B Stainless Steel Outside Body AISI 304 SB Stainless Steel Inside Depth: 43 Cm / 53 Cm (GN 1/1 Capacity) 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Digital Control Panel Electrical Resistor Automatic Defrost Special Water Evaporation (Hot Gas) Stainless Steel Legs Adjustable For Height Special Door and Hinge Systems Removable and Easy Cleaning Magnetic Gaskets Cooling Gas CFC Free: R 134 A / R 404 A Ambient Temperature: + 43oC %65 Humidity

Inside Body PVC Coated Black Steel Outside Body PVC Coated Gray Steel 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Energy Saving LED Lighting Fan Cooling Digital Thermometer & Thermostat Automatic Defrost Locks on Each Door Legs Adjustable For Height Special Door and Hinges System Removable and Easy Cleaning Magnetic Gaskets Plastic Coated Steel Shelf Cooling Gas CFC Free : R 134 A / R 404 A Ambient Temperature: + 32oC SS Inside / Outside 430 Stainless Stee

Inside Body PVC Coated Black Steel Outside Body PVC Coated Gray Steel 35/40 Kg/m3 Ecology Friendly HCFC Free Polyurethane Insulation Energy Saving LED Lighting Fan Cooling Digital Thermometer & Thermostat Automatic Defrost Locks on Each Door Legs Adjustable For Height Special Door and Hinges System Removable and Easy Cleaning Magnetic Gaskets Plastic Coated Steel Shelf Cooling Gas CFC Free : R 134 A / R 404

Ideal for water saving maintaining a high efficiency. All operations are managed by PLC with the possibility of remote management in “Industry 4.0” mode. Both HVAC and refrigeration sectors can be served.

Liquid chillers for low temperatures, also in outdoor environments The RW CW series of process fluid coolers (water, water/antifreeze) are water-cooled and operate with environmentally friendly gas compression. They allow cooled liquid temperatures between -8°C and +20°C. In standard design, ambient temperatures of up to +40°C are permissible, but in the “RW ax/HTA” version even higher ambient temperatures can be achieved. IP54 degree of protection as standard, allowing outdoor installation without a protective roof.

Fleetmaster CK-4 Extreme 15W/40 stands as a formidable API CK-4 heavy-duty diesel engine oil, expertly crafted with cutting-edge synthetic technology-based oils. It’s engineered to meet the demands of high-speed, four-stroke diesel engines operating in severe conditions, including those equipped with Diesel Particulate Filters (DPF), cooled Exhaust Gas Recirculation (EGR), and other advanced exhaust treatment systems. This versatile oil is suitable for both turbocharged and naturally aspirated engines. What sets Fleetmaster CK-4 Extreme 15W/40 apart is its commitment to providing superior durability and protection. It accomplishes this through enhanced shear stability and reduced oxidative thickening, effectively mitigating issues like abrasive wear, bore polishing, and piston deposits.

Fleetmaster CI-4 Plus 15W/40 is engineered with cutting-edge synthetic technology and tailored to withstand the rugged conditions. Its advanced high dispersant and anti-wear formulation are purpose-built to meet the stringent requirements of the latest low-emission US engines equipped with cooled Exhaust Gas Recirculation (EGR) systems, as well as Caterpillar ACERT engines. This diesel engine oil not only complies with international standards for superior performance and extended service life in both turbocharged and naturally aspirated four-stroke diesel engines but also plays a crucial role in reducing soot buildup in modern low-emission US engines. Fleetmaster CI-4 Plus 15W/40 features a unique formulation designed to set the highest standards for engine cleanliness, particularly in high-stress turbocharged engines. It effectively manages and suppresses bore polishing tendencies, curbing excessive oil consumption rates, and mitigating premature wear.

EVAPTON WATER CONDENSERS ARE USED FOR CONDENSING THE REFRIGERANT GAS IN INDUSTRIAL AND COMFORT COOLING SYSTEMS AND ARE MANUFACTURED IN EVAPTON STANDARDS OR IN SPECIAL DESIGNS ACCORDING TO DEMAND. WHILE ECON-C SERIES CONDENSERS ARE PRODUCED FOR COOLING APPLICATIONS USING MAINS WATER OR WATER COOLING TOWER WATER, ECON-M MODEL CONDENSERS ARE PRODUCED FOR SEA WATER OR SALT WATER. IT CAN BE MANUFACTURED FROM 20 KW COOLING CAPACITY UP TO 1500KW COOLING CAPACITY.

Fleetmaster Semi Syn CJ-4 10W/40 is meticulously crafted using cutting-edge technology, blending mineral and synthetic base oils to cater to the demands of heavy-duty diesel engines enduring the rugged conditions. This exceptional lubricant boasts an ultra-high dispersant and anti-wear formulation that goes above and beyond the API CJ-4 requirements. It is purpose-built to align with the latest US07 emission standards, tailored specifically for engines featuring exhaust treatment systems, including Diesel Particulate Filters (DPF) and cooled Exhaust Gas Recirculation (EGR), while running on low sulfur fuels. Fleetmaster Semi Syn CJ-4 10W/40 surpasses numerous international specifications, ensuring peak performance and extended service life in four-stroke turbocharged and naturally aspirated diesel engines. It plays a crucial role in mitigating soot thickening in the latest low-emission US engines.