Gas assisted - Import export

Gas assist molding is used to hollow out thick sections of a part where coring is not an option and sink is not acceptable. Gas assist molding can be applied to almost any thermoplastic, and most conventional molding machines can be adapted for gas assist molding. One of HODA, UAB activity is the plastic and rubber injection molding, using compressed nitrogen gas. We also provide assembly and packaging services.

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof (not guaranteed to be completely watertight). Virtually invisible when installed. EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GDZ cover can be opened and closed by one person. Central locking system: HAGODECK Type BV-GDZ steel cover is equipped with a central locking system. The cover can be opened from above using a special socket key and easily unlocked from underneath using the built-in handle. Safety device fitted to prevent the open cover from closing. Applications: For covers that need to be opened from above and below, quickly and without particular effort, e.g. in underground passageways, in underground railways, power stations, telecommunication or military facilities...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

With impressively low emissions and its ability to be converted for biofuels or hydrogen, the UL-S is designed to be future-proof. — Very high efficiency for low running costs and emissions — Complete system with customer-specific equipment and future-proof technology — Extremely well proven design “Made in Germany”, highly durable and easy to maintain — Consistent steam quality for reliable supply — Custom designs available for heat recovery boilers, hybrid or superheated steam — Smart boiler control and seamless system integration with digital assistants — Fuel: Gas, oil, bio gas, bio oil, hydrogen

HODA, UAB produces plastic products for the electrical industry. Our company provides that services: mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting, assembly and packaging, local and international delivery.

At the moment HODA, UAB operates 54 injection moulding machines, which gives us flexibility to produce different size and purpose plastic parts from a fraction of gram up to six kilograms of mass. HODA, UAB services: Mould tool manufacturing, Plastic injection moulding, Insert overmoulding, DC (dual- component) injection moulding, Gas assisted injection moulding, Thermoset moulding, Plastic blow moulding, Decoration, Tampo printing, Screen printing, Wet painting, Assembly and packaging, Local and international delivery.

Hot sale kids pedal bike baby balance ride on car children cycle kids balance bike bicycle tricycle Kids Balance Bikes Name:Baby balance bike Material: magnesium alloy Color: green，red Features Quick installation, one-piece gas-assisted process frame Age: 3 to 5 years Packing size 74*31*18cm Net weight: 4.8kg MOQ 10Pcs

Europem can supply complete flare systems as well as Flare Tips on their own for replacement or upgrade and refurbishment projects. The following standard Flare Tips are available: EP-PF Pipe Flare EP-EAS External Assist Steam EP-IAS Internal Assists Steam EP-EAS/IAS External/Internal Assist Steam EP-AA Air Assist EP-GA Gas Assist EP-CAA Compressed Air Assist EP-HP-PF High Pressure Pipe Flare EP-HP-MAS High Pressure Multi Arm Sonic EP-MP Multi Point EP-BP Burn Pit Special tailor made Flare Tips can be offered for specific applications. Europem Venturi Flame Shield (VFS) Europem has developed the proprietary Venturi Flame Shield giving double protection against flame lick. The VFS also pushes air up towards tip exit, leading to an enhanced and more stable combustion process. The VFS can be integrated into most Europem Flare Tips but is particularly suitable for H2S flares, ammonia flares, hydrocarbon flares and lean waste gas flares.

Flare Systems Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications. Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground flare systems and ancillaries to cover the needs of all major industries. Low and High Pressure Utility (Pipe) Flares Air assisted Flares Steam assisted Flares Gas assisted Flares Sonic Flares Speciality flares for Ammonia, H2S, LNG and lean waste gas Mobile Flare systems – for purchase, lease or rental Venturi Flame Shields protecting the flare from flame lick and improving combustion efficiency Ancillaries such as pilots, ignition systems, pilot detection, KO drums, water seals, molecular seals and conical purge seals Supporting structures including derricks, demountable riser type derricks, guy wire support systems, plus self supporting Flares Enclosed ground flares with single or multiple burners Temperature controlled combustors and thermal oxidisers. Europem aims to be a long term partner to all our clients and provides full aftermarket support for all operation, maintenance and intervention requirements. We can also provide for the inspection, maintenance, refurbishment and replacement of any flare system or components and can supply in some cases, rental flares during maintenance interventions.

Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary combustion air is supplied to the flame. The amount of air and hence the size of the tip and riser depend on the degree of smokeless operation required and the maximum flow for smokeless operation. Key features Proprietary design to maximize the mixing of waste gas and air streams and to create turbulence in the combustion zone. Variable speed fans, to supply the optimal amount of Air (Gas) Use of wind deflectors if required, to prevent flame impingement Flame holders around the periphery of the flare tip to ensure stable operation. Use of high grade alloys to enhance lifetime of the flare tip. The use of combustion/mixing air to cool the flare tip and thus enhance its lifetime Key advantages Smokeless operation under a wide range of operating conditions Smokeless flaring of high molecular weight gases Air cooling of the flare tip, resulting in longer lifetime and lower operation and maintenance costs Reduced radiant heat for a given capacity Applications Upstream oil & gas sector Chemical and petrochemical industries including refineries Tank farms and terminals Pipeline transport LNG and NG terminals and compressor stations

Ground flares can be either natural draft or forced draft, with or without temperature control and can be equipped with a single burner or with multiple burner arrangements: EP-PF Pipe Flare EP-EAS External Assist Steam EP-IAS Internal Assists Steam EP-EAS/IAS External/Internal Assist Steam EP-AA Air Assist EP-GA Gas Assist EP-CAA Compressed Air Assist EP-HP-PF High Pressure Pipe Flare EP-HP-MAS High Pressure Multi Arm Sonic EP-MP Multi Point EP-BP Burn Pit Special tailor made Flare Tips can be offered for specific applications. Europem Venturi Flame Shield (VFS) Europem has developed the proprietary Venturi Flame Shield giving double protection against flame lick. The VFS also pushes air up towards tip exit, leading to an enhanced and more stable combustion process. The VFS can be integrated into most Europem Flare Tips but is particularly suitable for H2S flares, ammonia flares, hydrocarbon flares and lean waste gas flares.

Simplify and Accelerate Gas Analysis Micro GC Fusion offers significant throughput gain through rapid temperature ramping and modular architecture. The transportable, lightweight chassis and web-based user interface enables simplified operation for both on-site and in-lab gas analysis. Need application assistance? Click here! Need a Safety Data Sheet (formerly MSDS)? Click here! SO 2 and H 2S gas monitoring Permanent gases and olefins in refinery gas Impurities in petrochemical products and specialty gases Solvent/VOC gas monitoring Catalyst research for alternative energy

Industries will generate Low CV waste gases, which are either difficult to burn or can contain insufficient energy to self-sustain the combustion process. For these applications, Europem developed the proprietary “ring-of-fire” Flare Tip. This tip has a ring of flame around the central waste gas tip thus ensuring complete oxidation of the low calorific waste gas. Both air assisted and non-assisted flare burners are available. Key features Proprietary design of HP sonic gas nozzle which maximises the entrainment of ambient air into the combustion zone Wind shield placed around the HP gas nozzles to prevent flame pull down Use of high grade alloys to enhance lifetime of the flare tip. Key advantages Smokeless operation at low heat radiation 100% smokeless turn down possible for air assisted HP flares Lower flare stack heights No need for any assist medium A low pressure flare can be integrated with the HP sonic flare to provide both HP and LP gas flaring in a single flare tip. Suitable for smokeless combustion of waste gas with entrained liquids Applications Upstream oil & gas sector Chemical and petrochemical industries including refineries Pipeline transport LNG and NG terminals and compressor stations

Technical data Dimensions (L/W/H) 122/80/174 cm Total weight 108 kg User weight up to 150 kg Equipment Integrated chip card system Free passage for simple training positioning Forward and backward crank Horizontal seat adjustment, removable seat for training standing up Gas-assisted height adjustment for the drive unit Optionally up to 200 kg user weight (Art. No. 10062800)

Technical Data Dimensions (L/W/H) 120/80/160 cm Total weight 124 kg Maximum user weight 150 kg Mains-independant operation Performance range graduation in 5 watt steps 15 - 500 Watt pedaling speed independent 15 - 1.000 Watt pedaling speed dependent Speed range 20 - 120 rpm Equipment Integrated chip card system Continuous horizontal seat adjustment Gas-assisted height adjustmend of the drive unit for seated or standing training position Suitable for wheelchairs due to removable seat Forward and backwards rotation possible in series (only basic programme package available) 3 Training programmes (quickstart, watt (timetraining), pulse) Multicoloured background lighting with feedback function for correct training performance Pulse receiver, polar-coded Options 200 kg user weight Additional training and test programmes Length-adjustable pedals (also adaptable for hand-bike-mode) Initial load reducible to 15 watt

Technical Data Dimensions (L/W/H) 152/67/132 cm Total weight 105 kg Maximum user weight 150 kg Mains-independant operation Performance range graduation in 5 watt steps 15 - 500 Watt pedaling speed independent 15 - 1.000 Watt pedaling speed dependent Speed range 20 - 120 rpm Equipment Integrated chip card system Deep passage for simple training positioning Continuous horizontal seat adjustment 3 Training programmes (quickstart, watt (timetraining), pulse) Multicoloured background lighting with feedback function for correct training performance Pulse receiver, polar-coded Options 250 kg user weight Additional training and test programmes Length-adjustable pedals Ear pulse system Adjustable backrest (gas-assisted)