Fuel oil - Import export

The damping fluid used by LEBENDämpfungstechnik GmbH is used with different consistency under the name COMPENSOL®. Each damping medium can be chosen to meet the requirements. We provide the ideal hydraulic oil (socalled medium) for use in temperaturecontrolled indoor areas up to extreme high temperatures or low temperatures. For special applications, e.g. at temperatures above +80° C or below 40° C, we use a pastelike dispersion as damping medium. This medium solidifies at rest to an apparently solid mass and only becomes flowable under the action of force. When the load ends, it returns to its apparently solid original state. This dispersion has the following properties chemically a colloidal solid dispersion physically a nonNewtonian pseudo plastic Bingham fluid with viscous properties It is a paste or better a coagulation structure and deforms plastically under mechanical stress.

We offer synthetic oils In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

ERC Soot Guard assures a permanently stable flame and soot-free, economical and environmentally-friendly combustion of heating oil in oil heating systems. THE EFFECT Soot is normally not a problem for modern oil heaters, except for oil heaters, where it may bring about high consequential costs. As a rule of thumb, a 1-mm-thick layer of soot on the boiler wall inhibits the heat transfer to the hot water to the extent that the heating oil consumption increases by approx. 4% with a consistent heat requirement. The main cause of soot is a poor and incomplete combustion of heating oil due to low oxygen levels. ERC soot guard relieves this and is simply added to the heating oil. THE RESULT ERC soot guard's catalytic effect is released in the flame and re-establishes optimal soot-free conditions. Consumption and costs are reduced and the impact on the environment as well as on the wallet is reduced, too. ERC soot guard works in more than just the flame.

Guard Thermic 3000 HP slows the natural ageing of heating oil and keeps energy stores, pumps, burners, and lines clean for high efficiency and operational reliability. THE EFFECT The newly developed heating oil additive ERC Guard Thermic 3000 HP significantly slows the ageing process of heating oil and prevents sediments. Energy stores, pumps, burners and lines remain clean and the heating system operates with the highest efficiency and operational reliability. Consumption and harmful emissions are reduced with clean combustion. In addition, ERC Guard Thermic 3000 HP increases the thermal stability and the storage life of heating oil. Deposits which are already present are also dissolved. ERC Guard Thermic 3000 HP is formulated such that sediments are slowly dissolved in small quantities and burned with the heating oil without leading to faults in the heater.

Guard Thermic 3000 slows the natural ageing of heating oil and keeps energy stores, pumps, burners, and lines clean for high efficiency and operational reliability. THE EFFECT The newly developed heating oil additive ERC Guard Thermic 3000 significantly slows the ageing process of heating oil and prevents sediments. Energy stores, pumps, burners and lines remain clean and the heating system operates with the highest efficiency and operational reliability. Consumption and harmful emissions are reduced with clean combustion. In addition, ERC Guard Thermic 3000 increases the thermal stability and the storage life of heating oil. Deposits which are already present are also dissolved. ERC Guard Thermic 3000 is formulated such that sediments are slowly dissolved in small quantities and burned with the heating oil without leading to faults in the heater.

ERC Guard Thermic for low-sulphur heating oil with a bio share and all other DIN heating oils slows the natural ageing of heating oil and contains an organic combustion enhancer. The Effect ERC Guard Thermic slows the natural ageing of heating oil. Stabilisers prevent components of the heating system from releasing into the heating oil and forming sediments, and/or accelerating the ageing of the heating oil. In the process, select active ingredients neutralise the ions already in the heating oil and apply a protective coating to the metal surfaces, which suppresses the release of new ions and protects against corrosion. In addition, the additive prevents the formation of resin-like, adhesive ageing products which arise due to the high thermal load of the heating oil within the pump and can block it. At the same time, lubrication of the pump is improved.

ERC Guard Kinetic supplements light heating oil with additional characteristics which optimise it for stationary engines and enables the operation of diesel CHPs with more affordable heating oil. THE EFFECT ERC Guard Kinetic was specially developed for combined heat and power plants and other stationary engines which can be operated with any type of less expensive heating oil instead of diesel. The exclusively formulated combination of active ingredients lends the heating oil the characteristics which it lacks for effective and gentle operation in diesel engines. ERC Guard Kinetic is suitable for all heating oil types with a bio share of up to 20% and improves the characteristics of standard diesel. The heating oil with additive is primarily used for combined heat and power plants, from the macro to the mini, to the future micro CHPs designed for individual homes.

DC 12V Mini Diesel Water Oil Fuel Transfer Pump Truck Boat Submersible Stainless 38mm Car Auto Vehicle Oil Pump

Outer shell CR black wear, ozone, seawater and hydrocarbon resistant. Application supply of crude oil and liquid petroleum products to/from tankers and bunker vessels. max. 55% resistance to aromatics. Electrically continuous (discontinuous on request). Builtin fittings. 64BAA 100% aromatic content 64CAA biofuel

Reinforcement High tensile strength textile cords and embedded steel spiral wire. Outer shell Black CR wear, ozone, seawater and hydrocarbon resistant. Application Suction of crude oil and liquid petroleum products; and delivery from/to tankers and bunker vessels. max. 55% resistance to aromatics. Electrically continuous (discontinuous on request). Builtin fittings. 60EAA 100% aromatics content 60FAA biofuel

crude oil heavy & light

JET A-1 is a kerosene-type fuel. It is compatible with most jet aircraft, both civil and military, helicopter turbine engines, turboprops and compression-ignition piston engines.

EN 590 is the current standard for all automotive diesel fuel sold in the European Union member states and other European countries. That is suitable for use in all road vehicles powered by a diesel engine

Oil

Capacities TM Gidrobak used for long-term storage of petroleum products. Flexible tanks are a convenient solution in cases where the weight of the tank and its mobility are important. A distinctive feature of flexible tanks for fuel and lubricants is ease of operation. To install the tank does not require any concrete bases or special equipment. The entire capacity setting takes less than 15 minutes. Time-saving compared to metal tanks is huge. Depending on the volume of the tank for installation, 1 to 8 people are required. Flexible tanks can be used for temporary storage of transformer oil in routine maintenance of electric oil transformers. Storage of petroleum products in metal containers has significant disadvantages: significant weight, large volume, the need for protection from rain and corrosion. Our polymeric tanks Gidrobak TM can significantly reduce the cost of works associated with the storage of petroleum products.

BIG FIRE lamp oil 950ml manufactured in Europe according to high quality standards on behalf of the Union of Greek Wholesalers.

This is ARC OIL AND GAS LTD", a very reliable and reputable representative to Refinery/Seller . We have available Petroleum products Kazakhstan and USA origin such as Jet Fuel grade 54 and grade A1, EN590 , LNG , LCO , Diesel D2, Virgin D6, Diesel ULSD and other Oil products, attached is our Official SCO with price, terms and procedure, if you or your buyer is interested and have accepted the conditions should send an official ICPO to proceed to close the deal as soon as possible. Our full blown deals in the Oil and Gas Sector cannot be Sideline because we offer best service to our buyers.CONTACT BELOW ARC OIL AND GAS LTD Name : RASHAD, Omar Company No 11883502 19 John Franklin Way, Erpingham, Norwich, NR11 7AZ , United Kingdom. Telephone/WhatsApp : +447380415509 Email : info@arcoilgasltd.com

This is ARC OIL AND GAS LTD", a very reliable and reputable representative to Refinery/Seller . We have available Petroleum products Kazakhstan and USA origin such as Jet Fuel grade 54 and grade A1, EN590 , LNG , LCO , Diesel D2, Virgin D6, Diesel ULSD and other Oil products, attached is our Official SCO with price, terms and procedure, if you or your buyer is interested and have accepted the conditions should send an official ICPO to proceed to close the deal as soon as possible. Our full blown deals in the Oil and Gas Sector cannot be Sideline because we offer best service to our buyers.CONTACT BELOW ARC OIL AND GAS LTD Name : RASHAD, Omar Company No 11883502 19 John Franklin Way, Erpingham, Norwich, NR11 7AZ , United Kingdom. Telephone/WhatsApp : +447380415509 Email : info@arcoilgasltd.com

Product Name: copper tube Material: T2 TP2 TU2 Specification: 10-1000mm Grade: C12000 /C11000 Length: as required Cu (Min): 99.90% Alloy Or Not: Non-alloy Ultimate Strength Elongation (≥ %): 40(≥ MPa): 205 Wall Thickness: 0.2-60mm Outside Diameter: 11-800mm Place of Origin: China Package: standard export packing Shape: round Payment term:T/T,L/C etc. Application: 1 Air Conditioner and Refrigerator 2 Water tube service and distribution 3 Fire Protection, Solar, Fuel/Fuel Oil 4 Natural Gas, Liquefied Petroleum (LP)Gas 5 HVAC, Snow Melting, Drain, Waste, Vent Piping 6 Re-drawing usage 7 High conductivity use 8 Cable Lugs and Termainals 9 Electric Connectors 10 Lighting industry

Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...

Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...

Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...

Greater efficiency high performance separation media Our oil separation media feature a unique bonded fiber technology that can perform the function of multiple layers of traditional filter media, efficiently separating oil mist from the air stream. Our bonded fiber can also separate water from diesel and other fuels. With its gradient density structure, our reliable, efficient media can replace several layers of traditional media used in water separation. Specifically designed to reduce vehicle emissions and to improve performance, our powertrain filters come in two different types of solutions that can be provided in both custom and standard options: Our unique bonded fiber structure can efficiently separate over 95% of oil mist from oil reservoir fumes. Efficiently removes water from fuel streams that can cause issues with injectors and engines Increase efficiency, as POREX ® media can perform the function of multiple layers of traditional separation filter media request...

Flexible pressure hose for petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with aromatic content up to 50% Diesel fuels, heating oils, mineral oil-based hydraulic oils. Barrel-polishable hose with very narrow bending radiuses and easy handling. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned *) Version as tank cleaning hose. Resistant to all customary cleaning agents. Supplied by the roll or cut to length. Other versions and dimensions on request.

For tar or hot bitumen at temperatures from –25°C to +200°C. With additional spiral for maximum safety and highest possible flexibility. Construction: Special NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral abrasion-resistant CR-cover interior and exterior smooth, fabric patterned Please follow the safety regulations for bitumen hoses! Tar spraying hose Bitumen hose Sold by the roll or cut to length with cuffed ends and/or widened hose endings. Also available as heatable version or per DIN EN 13482. Other versions and dimensions on request.

Delivery hose for crude oil, lubricating oil, diesel oil, petrol and other fuels up to an aromatic content of 50%. Steam cleaning max. 120°C / max. 60 min. Wide range of applications. Kink and abrasion resistant due to vulcanized hose fittings. With 3 or 4 times burst pressure safety. Temperature resistant from –35°C to +110°C. Slight elongation at full load. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Concealed steel spiral weather-resistant, abrasion-resistant, conductive CR cover Interior smooth, exterior fabric patterned Depending on the application and customer needs, dock hoses are supplied with built-in flanges. Flange dimensions per DIN, ANSI (ASA) or as special bore. Other versions conforming to DIN EN 1765, BS 1435 or other standards and pressure stages on request. Other versions and dimensions on request.