Results for
ACTON S.A.
France
Twolock CS nuts Zn steel - White zinc-plated
Request for a quotePOMPES JAPY
France
Body, cover, rotor, screws and bolts of the body: 316 stainless steel Vanes: PTFE Waterproofing: Teflon-coated braid Handle: zinc-plated steel
Request for a quotePOMPES JAPY
France
Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length
Request for a quotePOMPES JAPY
France
Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (perbunan) (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length Trolley-mounted pump with the CHAR version
Request for a quoteNORELEM FRANCE
France
Plate die-cast zinc or stainless steel 1.4305. Anti-slip plate thermoplastic elastomer. Version: Die-cast zinc plate, black powder-coated. Stainless steel plate, bright. Note: Swivel feet consist of a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint. The anti-slip plate absorbs vibrations and prevents the swivel foot slipping. For matching threaded spindles see 27810. For matching ball joints see 27811.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Material, version: 1. Sealing cap red Polyamide 66 thermoplastic. 2. Filler sieve black Polypropylene thermoplastic. 3 Flange electro zinc-plated steel. 4. Fastening screws electro zinc-plated steel. 5 Flange seal cork. 6. Chain brass.
Request for a quoteNORELEM FRANCE
France
Steel or stainless steel 1.4404. Version: Steel electro zinc-plated. Stainless steel bright.
Request for a quoteNORELEM FRANCE
France
Steel 1.0718 or stainless steel 1.4305. Version: Steel electro zinc-plated. Stainless steel bright.
Request for a quoteNORELEM FRANCE
France
Steel. Stainless steel 1.4305. Stainless steel A4 1.4401. Version: Steel electro zinc-plated. Stainless steel bright. Note: Block hinges with fastening nuts and extended middle section for inset doors. Mounted with nuts (M6 or M8) from inside. The hinge can be mounted left or right. The opening angle is 180°. Supplied unassembled. Fastening nuts and washers are supplied.
Request for a quoteNORELEM FRANCE
France
Suitable for emergency stop and continuous use Energy reduction: 58% to 73% Dynamic force absorption: 870 N to 35190 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Fastening screws: Special cap screws with hex sockets, material 44SMn28 (free-cutting steel SAE 1144) electro zinc-plated: M6x9, M6x10, M8x14, M12x18, M16x26 ISO 4762 cap screws with hex sockets - 8.8 steel, black: M3x6, M4x8**, M5x10** ** With DIN 125 washer, electro zinc-plated steel. Application: Linear slides and linear guides, pneumatic cylinders, handling equipment, machines and plants
Request for a quoteNORELEM FRANCE
France
Steel 1.0037. Aluminium EN AW-6060. Version: Steel electro zinc-plated. Aluminium anodised. Note: The machined tolerances of these round and square tubes are individually matched to the tube clamping system. *Square aluminium size 10x10 are only available as solid bars. On request: - Custom cut length (L max. 5000 mm) - Stainless steel tube (L max. 3000 mm)
Request for a quoteNORELEM FRANCE
France
Metal parts, steel grade 5.6. Elastomer, natural rubber, medium hardness, Shore 60. Version: Steel electro zinc-plated. Note: These machine feet have proven themselves to be universally applicable elements for the elastic support of all types of machine. They are commonly used wherever large horizontal movements are to be avoided. The horizontal rigidity is higher in all directions than the vertical rigidity. If used correctly they are excellent at preventing the transfer of vibration and noise. Machine feet with shear protection are available for situations where tensile forces are to be expected. The indicated load data are reference values for static loads by rubber hardness of Shore 60A. In contrast to those in the drawing, the holes D2 can also be elongated holes.
Request for a quoteNORELEM FRANCE
France
Outer body steel. Mounting bush plastic. Version: Steel electro zinc-plated. Note: Rotation dampers are maintenance-free, ready-to-install elements for the controlled braking and damping of rotational or linear movements. These rotation dampers enable the smooth opening and closing of small covers, compartments and drawers. They protect sensitive components and can also raise the quality and value of products. The rotation dampers brake right or left rotations or in both directions. One cycle rate corresponds to one 360° right rotation and one 360° left rotation. Attention: The rotation damper bush should not be used as a support, but rather as an external guide or bearing.
Request for a quoteAVM AUTOMATION
France
Front plate in steel for better torsion resistance. (support or external force offcentered from the axis of the guide) Available on the Classic, Strengthened and Heavy series for cylinders Ø50 to Ø125. Front plate in steel on guide unit These guide units are equipped with a front plate a zinc steel for better resistance to torsion. Indeed, when the front plate exerts an offcentered pressure before the end stroke of the cylinder or if the guide undergoes an external force offcentered with respect to the axis of the guide, the generated twist can cause a matting of the housing of the rod in the plate if it is aluminum, especially if the penetration of the rod is low (as on the Classic series). This range is available on the Classic, Strengthened and Heavy series for Ø50 to Ø125 cylinders.
Request for a quoteResults for
Zinc-plated steel - Import exportNumber of results
15 ProductsCountries