Valves - Import export

We manufacture valves in aluminium bronze, delivered "as cast" , rough or fully machined according to international quality standards

Sand casting of copper alloys, mainly nickel aluminium bronze Maximum weight: 50 tons. Staff: 50 employees. Turnover: approx. 8 M€ 4 et 8 rue Etienne Dolet F-76140 LE PETIT QUEVILLY Tél: +33 (0) 2 35 63 78 50 Fax: +33 (0) 2 35 72 99 99 Internet www.inoxyda.fr E-mail : contact@inoxyda.fr

Main products: valve body, housing, gate for butterfly valves, ball trunnion bearing & ball for trunnion mounted ball valve, flange, seat for ball and butterfly valves, cage for pressure control valves,... Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (perbunan) (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length Trolley-mounted pump with the CHAR version

Ductile iron push-in flanges with express joints MAIN FEATURES - Ductile iron body EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - Express seal accessories supplied - Complies with standard EN 545 - A.C.S. certified product

Ductile iron spigot with drilled flanges MAIN FEATURES - Made of ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - ISO PN10 and PN16 drilled flanges up to DN150, from DN200, ISO PN10 or PN16 drilling to be specified. or PN16 drilling to be specified - Complies with standard EN 545

PARTS FOR MOUNTING AND SERVICING HYDRAULIC SYSTEMS Ductile iron mounting joint MAIN FEATURES - Ductile iron body EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - Galvanised or chrome-plated nuts and bolts - Complies with standard EN 545 - A.C.S. certified product

PARTS FOR INSTALLATION AND OPERATION ON HYDRAULIC NETWORKS cast iron universal coupling MAIN FEATURES - Body in ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Nominal pressure: 16 bar - For all types of pipe (PVC - PE - cast iron - steel) - Complies with standard EN 545 - A.C.S. certified product

MAIN FEATURES - Nominal pressure: 10 bar, 16 bar or 25 bar - Permissible operating pressure: 16 bar - Operating temperature: -10°C to +50°C - Blue (Ral 5015) epoxy powder coating (average 250 microns) - Operated by multiturn gearbox with handwheel - FSH closing (clockwise closing) - Complies with standard EN 593 - ISO PN10 and PN16 drilled flanges up to DN150, from DN200, ISO drilling PN10 or PN16 to be specified - A.C.S. certified product

MAIN FEATURES - Full bore valve - Pressure rating: 10 bar, 16 bar or 25 bar - Permissible operating pressure: 16 bar - Operating temperature : -10 °C to +50 °C - Square (30 x 30 mm) or handwheel operation - Short or long spacing (FAH or FSH closing) - ISO PN10 and PN16 drilled flanges up to DN150, from DN200, ISO PN10 or PN16 drilling to be specified - Complies with EN 1074-1 and EN 1074-2 - A.C.S. certified product

Protection of hydraulic networks Axial check valve Ductile iron body Nominal pressure 16Bars ISO PN10 and PN16 drilled flanges up to DN 150, from DN 200, PN 10 or PN16 drilling to be specified

Ball check valve Ductile iron body Blue epoxy anti-corrosion coating Nominal pressure 16Bars ISO PN10 and PN16 drilled flanges up to DN 150, from DN 200, PN 10 or PN16 drilling to be specified

Brass 1/4 turn meter tap CW614 / 617 MAIN FEATURES - Brass body - Prison nut secured by a hole for sealing wire - HDPE side sealed by compression and secured by a hole for sealing wire - A.C.S. certified product

Brass 1/4 turn safety valve to standard NF EN 1216X Features - Angle or straight model (full passage) - Captive nut secured by a hole for sealing wire - Non-removable cylinder lock - Several colour-coded locks available - Watertight lock-cover plug with sealing hole - Operating temperature: 0°C to 90°C - Maximum working pressure: 16 bar - Minimum test pressure: 24 bar - A.C.S. certified product

Cast iron inlet tap with stopcock MAIN FEATURES - Body in cast iron FGL or FGS - Cast iron operating square (30 x 30 mm) - Nickel-coated brass ball - Boss: male thread - Metric pitch (PB or GB) - FSH or FAH shut-off - PFA (Permissible Operating Pressure): 16 bar - PEA (Permissible Test Pressure): 24 bar

Brass side inlet tap MAIN CHARACTERISTICS - Brass body, compliant with standard NF EN 1216X - Cast iron operating square (30 x 30 mm) - Nickel-coated brass ball - Boss: male thread - Metric pitch (PB or GB) - PFA (Permissible Operating Pressure): 16 bar - PEA (Permissible Test Pressure): 24 bar

We manufacture rough or fully machined cage and seat for pressure control valves & control valves in : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request

We manufacture rough or fully machined ball and ball trunnion bearing for trunnion mounted ball valve : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request

All size NAB castings for Valves. Total capacity of 15 To enables to accomodate almost any aluminium bronze project

Aluminium bronze sand castings for all you valve applications. Thanks to our long expertise in EN 1982 , ASTM B 148 or B 171, Def Stan... we can provide quality casting up to 15To of alloy. Parts are delivered "as cast" , rough or fully machined according to international quality standards ; our scope of supply can include specific ITP (inspection test plans) with or without 3rd party inspections.

We manufacture rough or fully machined body and flange for 3 pieces ball valves in : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request

With casting capacities up to 15To and a long experience in sand casting aluminium bronze, we can support most valve projects

We cast all valve components in aluminium bronze (CC 333G EN 1982, ASTM/ASME B18 C95800...) and deliver worldwide : "as cast" , "rough or fully" machined according to international quality standards

We cast any valve component in aluminium bronze. D elivered "as cast" , rough or fully machined according to international quality standards

Do not hesitate to contact us for your requests for industrial, HVAC and water valves and pipes... www.stracau.com s.creiche@stracau.com +33.6.76.18.78.74 (Whatsapp)

Rotary valves have for function the distribution or the continuous dosing of pulverulent products. FORPLEX rotary valves was studied specially to be easily adapted to the base of reception hoppers, cyclones, crushers, pneumatic transport and dust removal captation devices... So they are the essential complement to any installation of grinding, pneumatic transport or classification. Using some size of rotary valves, FORPLEX can provide a solution to meet the most demanding powder properties