Results for
ETIC TUBES ET PROFILES
France
Square, rectangular copeer tubes
Request for a quoteGRAVOTECH
France
VIN ENGRAVING MACHINE The Vehicle Identification Number (VIN) marking on chassis requires a reliable scribing machine, able to perform deep marking on all materials, from soft, such as aluminum to the hardest steels at a high speed. Our SV530 scribing marking machine has been used for more than 10 years with automotive products, proving fantastic durability and strength. SILENT MARKING SYSTEM Scribing technology performs silent marking on hollow metal parts (tubes and pipes) or formed plates (chassis and body parts) when these objects will naturally resonate during rotary marking. DIRECT PART MARKING Designed to combine depth with high speed and aesthetic results, our scribe marking machine has one of the best-marking speed/depth ratios: mark 17 characters of 7mm high. Powerful and fast, this machine creates deep marking before and after the treatment of parts.
Request for a quoteGRAVOTECH
France
QUIET DPM MACHINE Scribing technology makes sense as a metal marking machine, for metal parts (tubes and pipes) or formed plate (chassis and body parts) which will naturally resonate during dot peen marking. Scribing, by reducing the number of impacts, will allow a smooth and near silent marking with high contrast, making it easier to proofread. Thanks to the Datamatrix kit, we offer you the possibility to switch to a dot peen mode when you need to mark a 2D code. QUALITY SCRIBING MACHINE Designed to combine depth with aesthetic results, speed, strength and position can be configured for perfect direct part marking consistency and legibility meaning a high possibility to survive the painting process. This gives the highest quality characters with the existing fonts. STRONG & DURABLE INDUSTRIAL MARKER Composed of high rigidity guide rails and high-performance styluses. high amplitude, anti-burrs, and a diamond tip.
Request for a quotePIRPED INTERNATIONAL
France
Standard : EN 1092-1, DIN 86030, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN1200, 1/2"-60" Pression : PN6-PN100, 150Lbs-2500Lbs Material :
Request for a quotePIRPED INTERNATIONAL
France
Standards :EN 1092-1, DIN 2576, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-24" Pressure : PN2.5-PN100, 150Lbs-900Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standard :ASME B16.48 Dimension : 1/2"-24" Pressure : 150Lbs-2500Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN, ANSI B16.5 Dimension : DN15-DN600, 1/2"-24" Pression : PN2.5-PN160, 150Lbs-2500Lbs Material :Acier Carbonne, Allié, Inoxydable, Duplex & Super Duplex et autres…
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, ANSI B16.5, ASME B16.47 Dimension : DN15-DN2000, 1/2"-60" Pression : PN10-PN400, 150Lbs-2500Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN 2566, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN1000, 1/2"-24" Pression : PN6-PN100, 150Lbs-2500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN 2631-2638, ANSI B16.5 B16.47, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-60" Pression : PN2.5-PN400, 150Lbs-2500Lbs Matière : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN 2527, ANSI B16.5 B16.47, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-60" Pression : PN2.5-PN400, 150Lbs-2500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN 2642, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN600, 1/2"-24" Pression : PN2.5-PN40, 150Lbs-1500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Special Forgings Dimension :½" - 196" up to 35 000 kgs/pc
Request for a quotePIRPED INTERNATIONAL
France
Special Flanges Dimension : ½" - 196" up to 35 000 kgs/pc
Request for a quotePIRPED INTERNATIONAL
France
Standard: API 6A Dimension : 2 1/16" - 30" Pressure : 2 000 psi-15 000 psi Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standard : AWWA C207-01 Dimension : 4"-144" Pressure : Class B, Class D, Class E, Class F Material : Carbon Steel, Stainless Steel
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ADIS FRANCE
France
2-bolt support clamp for PVC and PE pipes or for steel or cast iron pipes CHARACTERISTICS Blue epoxy anti-corrosion coating FGS cast iron body Suitable for PVC / PE and cast iron / steel pipes EPDM seal Pressure rating: 16 bar Available in PB and GB
Request for a quoteDELTAFLUID
France
Many piping and instrumentation accessories are necessary to implement the flow measurement of a fluid in a pipe: the shutters to isolate the existing pipe in case of intervention, the flanges to fix the primary elements and to connect to the existing process, flow straighteners or flow conditioners to stabilize the flow before the measurement but also condensation pots for steam measurement and finally manifold, pressure transmitter always mandatory for differential pressure flow measurement.
Request for a quoteDELTAFLUID
France
Suitable for flow measurement in large pipes, for installations with low pressure dropAverage measurement over the entire length of the tube. Installation on the pipe: compression fitting, flange ISO PN 2.5 to 420 or ASME 150 # to 2500 #, retractable. Material: Standard: 304L / 316L stainless steel, others according to your application.
Request for a quoteAXON CABLE SAS
France
Axon' expertise in PTFE insulated wires and cables has enabled the company to offer different PTFE based products : tubes, rods, profiles, films, glass cloth impregnated with PTFE, desiccant bags, Celloflon® tapes, etc... They all take advantage of the mechanical, chemical, thermal and electrical characteristics of the PTFE (polytetrafluorethylen). Celloflon is an expanded PTFE material patented by AXON'CABLE Advantages Good temperature resistance (-200°C to +260°C) Low dielectric constant Non adhesive properties Non flammability Chemical resistance, … Biocompatibility Construction Tubes can be used as cable insulation, cannulae, tubes for liquids or hot gases (e.g assemblies for ink jet printing). Various versions : from ultra thin tubes to tubes with specific diameters Various colours : natural, black, yellow, red, orange, bicolour, spiral, … Tubes for micro-catheters with walls as thin as 10 µm PTFE multilumen tubing
Request for a quoteINOXYDA SA
France
Floating head, Channels, Covers and tubesheets in aluminium bronze according ASTM standards for all tube and shell heat exchangers
Request for a quoteSPM - SOCIÉTÉ PYRÉNÉENNE DE MÉTALLURGIE
France
DRILLSTAR Economill is a low-cost mill, ideal for milling tubular equipment. It will also shave off cement in drill pipes and tubings or mill bridge plugs and retainers. Main advantages The Economill can be air freighted at low cost for urgent jobs. Made with a standard rock-bit connection, it can be easily adapted to drill stem stabilizers or used inside a skirt to mill fish heads. A large central hole gives improved mud flow, facilitating the evacuation of cuttings. Other small holes allow a perfect cleaning of the blade design ensures perfect stabilization and centering in the casing. Drillstar Economill can be used with a turbodrill.
Request for a quoteSPM - SOCIÉTÉ PYRÉNÉENNE DE MÉTALLURGIE
France
Venturi tube is installed on pipe line to ensure evolution of fluid cross flow section (by convergent, throat, divergent) in order to create calibrated differential pressure loss. The measurement of if by 1 or x pressure taps pair(s) allow to define fluid flow rate. Process norm: NF EN ISO 5167-4, ASME MFC-3M Construction code: NF EN 13480, RCC-M, ASME, CODETI SPM capability: DN25 to DN800
Request for a quoteCREISCENDO
France
Parker Hannifin is the world leader in the development, production and marketing of components, systems and solutions in the field of control and motion. Parker supplies products in 9 technologies : hydraulics, pneumatics, electromechanics, filtration, process control, connectors, sealing, air conditioning and aerospace . With a large distribution network around the world, you can rest assured that you can find a Parker distributor near you who can provide technical support, meet your needs and provide troubleshooting and maintenance.
Request for a quoteResults for
Tubes and pipes - Import exportNumber of results
26 ProductsCountries
Company type
Category