Results for
NORELEM FRANCE
France
Steel, bright. Stainless steel A2, bright. Stainless steel A4, bright.
Request for a quoteNORELEM FRANCE
France
Sleeve and spring stainless steel. Ball stainless steel or POM. Version: Sleeve bright. Steel ball hardened and bright.
Request for a quoteNORELEM FRANCE
France
Stainless steel 1.4305. Version: Bright
Request for a quoteNORELEM FRANCE
France
Steel 1.0718 or stainless steel 1.4305. Version: Steel electro zinc-plated. Stainless steel bright.
Request for a quoteNORELEM FRANCE
France
Steel or stainless steel 1.4404. Version: Steel electro zinc-plated. Stainless steel bright.
Request for a quoteNORELEM FRANCE
France
Black thermoplastic. Steel grade 5.8 or stainless steel 1.4305. Version: Metal parts trivalent blue passivated steel or bright stainless steel. Note: Star grips with projecting steel bush and blind hole or female thread are especially suited for cross pinning. Drawing reference: Form H: bush with blind hole Form K: tapped bush Form L: external thread
Request for a quoteNORELEM FRANCE
France
Black thermoplastic. Bush and screw 5.8 steel or 1.4305 stainless steel. Version: Steel trivalent blue passivated. Stainless steel, bright.
Request for a quoteNORELEM FRANCE
France
Steel 1.0718 or stainless steel 1.4305. Version: Electro zinc-plated steel. Bright stainless steel. Note: Pin with groove, suitable for DIN 71752 clevis. Secured with a DIN 6799 E-type circlip (alternatively a KL or SL clip). When combined with a suitable clevis and tang, forms a fully functional clevis joint.
Request for a quoteNORELEM FRANCE
France
Aluminium. Rim flanges, steel. Version Aluminium bright. Steel electro zincplated. Note Standard T profile acc. to DIN 7721 T2 with metric pitch (trapezoidal toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter.
Request for a quoteNORELEM FRANCE
France
Cable fasteners: Stainless steel 1.4404 or PVDF. Hose: Plastic. Version: Cable gland: bright stainless steel, transparent plastic. Hose: coated Note: Washers supplied. EN 60423 metric thread. IP rating 66, 68 up to 15 bar, 69K. Tension relief corresponds to EU standard 62444. EHEDG certified. Seal insert ADI - free Temperature range: Stainless steel cable glands: -40 °C to +85 °C. Plastic cable glands: -20 °C to +85 °C. Hose: -20 °C to +95 °C.
Request for a quoteNORELEM FRANCE
France
Steel, black oxidised. Stainless steel, bright. Note: Due to the better haptics, a larger pitch was chosen contrary to DIN. Drawing reference: Form A: without pin hole Form B: with pin hole Drill through and ream pin hole during assembly.
Request for a quoteNORELEM FRANCE
France
Steel painted. Aluminium bright. Note: When using spherical washers use the wide series 07420 Form G.
Request for a quoteNORELEM FRANCE
France
Grip black or traffic red RAL3020. Thrust washer black. Hinge pin bright. Stud and washer trivalent blue passivated or bright stainless steel. Note: Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew. Plastics are subject to creeping under load (retardation), this can cause reduced clamping force. Drawing reference: 1) setscrew for fine adjustment of lever
Request for a quoteNORELEM FRANCE
France
Handles cast aluminum EN AC-46200. Thrust washer plastic PA 66 GF 35-X fibreglass reinforced. Hinge pin stainless steel 1.4305. Studs and washer steel grade 5.8 or stainless steel 1.4305. Version: Handles fine structured powder-coated, black or red RAL 3003. Thrust washer black. Hinge pin bright. Studs and washer blue passivated steel or bright stainless steel. Note: Plastics are subject to creeping under load (retardation).
Request for a quoteNORELEM FRANCE
France
Steel. Stainless steel 1.4305. Stainless steel A4 1.4401. Version: Steel electro zinc-plated. Stainless steel bright. Note: Block hinges with fastening nuts and extended middle section for inset doors. Mounted with nuts (M6 or M8) from inside. The hinge can be mounted left or right. The opening angle is 180°. Supplied unassembled. Fastening nuts and washers are supplied.
Request for a quoteNORELEM FRANCE
France
Steel or 1.4305 stainless steel Version: Trivalent passivated. Stainless steel version bright. Note: LH thread refers to dimension D2.
Request for a quoteNORELEM FRANCE
France
Steel 1.0401 (C15) or stainless steel 1.4301 (whirled spindles stainless steel 1.4305). Version Steel rolled, bright. Stainless steel up to Tr 40x7 rolled, above this whirled, bright. Note Rolled, high precision trapezoidal thread spindles. ISO trapezoidal thread based on DIN 103. The trapezoidal thread spindle is a transmission thread with relatively high friction. Standard thread forms are selflocking. This has the advantage that they generally do not need to be secured in the rest position. Tolerance class 7e Pitch precision 0.3/300 mm Length sawed with excess, ends not deburred.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Steel 1.0718. Stainless steel 1.4305. Version Steel black oxidised. Stainless steel bright. Note Rigid couplings transmit high torques without rotational play. They are used where there are no shaft displacements or alignment errors. Wearfree and maintenancefree. Screws secured to avoid vibration induced loosening. The maximum torque transmission can only be achieved through optimal installation and correct shaft dimensions. Maximum speed 4000 rpm.
Request for a quoteNORELEM FRANCE
France
Steel or 1.4305 stainless steel Version: Steel trivalent blue passivated. Stainless steel, bright. Note: Swivel feet consist of a threaded spindle and a plate joined together. Any threaded spindle can be combined with any plate. The height of the complete swivel foot can be calculated from the length of the threaded spindle + height of hexagon + 22.5 mm. (Overall height of swivel foot = L + L1 + 22.5 mm) Depending on the version, threaded spindles can have a thread undercut in front of the hexagon.
Request for a quoteNORELEM FRANCE
France
Clamping angle diecast zinc. Grip diecast zinc DIN EN 12844. Steel parts stainless steel 1.4305. Cam lever cast aluminium. Body steel. Version Clamping angle painted aluminium tone. Handle powdercoated. Stainless steel bright. Slot key electro zincplated. Cam lever black powdercoated, steel parts black oxidised. Note The clamping angles are used for connecting two profiles of the same series that have contact on the side faces and cross at any angle. Loosening the screw releases both clamps allowing free rotation and sliding along the slots. The clamping angles are generally used in pairs or in combination with a joint angle.
Request for a quoteNORELEM FRANCE
France
Workpieces are clamped and released by compressed air. The possible clamping diameter is from 16 to 20 mm. Material: Body, stainless steel. Seal, NBR. Version: Stainless steel bright. Note for ordering: Cylinder head screws M4X35 for fastening from below are included with delivery. Cylinder head screws with low head M5 for fastening from above are not included with delivery. Note: Installed dimensions for plate thickness 6 mm. The stated retaining forces are related to an operating pressure of 0.5 Mpa and a surface quality of Ra 1.6 µm. Repeat accuracy in this case is ±0.2 mm.
Request for a quoteNORELEM FRANCE
France
Plate die-cast zinc or stainless steel 1.4305. Anti-slip plate thermoplastic elastomer. Version: Die-cast zinc plate, black powder-coated. Stainless steel plate, bright. Note: Swivel feet consist of a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint. The anti-slip plate absorbs vibrations and prevents the swivel foot slipping. For matching threaded spindles see 27810. For matching ball joints see 27811.
Request for a quoteNORELEM FRANCE
France
Seel version trivalent blue passivated. Stainless steel version bright. Note: The spherical washer levelling set is used to mount and align motors, aggregates, drive units and production lines. The spherical washer gives exact alignment of sloping faces with an inclination of up to 4°. The locknut secures a prescribed adjustment. Accessory: Spherical levelling washers 07460
Request for a quoteNORELEM FRANCE
France
Steel 1.7225. Stainless steel 1.4305. Version: Seel version trivalent blue passivated. Stainless steel version bright. Note: Levelling sets are used for mounting, levelling and aligning motors, aggregates, drive units and assembly lines. They have a large adjustment range of 15 mm to 40 mm. Other sizes available on request.
Request for a quoteNORELEM FRANCE
France
Housing plastic. Ball bearing stainless steel 1.4112. Plain bearing insert POM. Bushes and grease nipple stainless steel 1.4301. Version Plain bearing insert white. Housing green. Stainless steel parts bright. Note The housings are very robust, hard wearing and shock proof. They are resistant to most alkaline solutions, weak acids (PH 49) and brines. In contrast to cast or steel housings the special plastic in these housings prevent the formation of microorganisms. Drawing reference 1) ball bearing 2) plain bearing
Request for a quoteResults for
Bright steel - Import exportNumber of results
26 ProductsCompany type