Steel wheels - Import export

Housing aluminium. Worm screw steel, worm wheel special brass. Version Housing anodised. Ball bearing with rubber sealing washer RS. Note Universally applicable and maintenancefree worm drive in one size with a centre distance of 20 mm and 7 different ratios. The housing is sealed to prevent grease leakage and keep dust out. These are left hand worm gears. The rotation direction on the shaft is arbitrary. smooth power transmission simple screw fastening quiet Note FR permissible radial force at FA=0 FA permissible axial force at FR=0

Material: Housing, steel plate. Wheel tread, high quality polyurethane elastomere. Wheel rims, die-cast aluminium. Version: Housing, press-formed. Swivel housing, double-row ball bearings in a swivel head. Ball bearing wheel axle bearings. Note: Wheel axle bolted. Swivel and fixed castors with mounting plate. Application: Heavy loads can be easily transported using this load handling equipment. The roll and swivel resistance is reduced with this new wheel series designed for intralogistic heavy load applications. Temperature range: -25 °C to +70 °C

Worm screw steel. Worm wheel CuZn37Mn3Al2PbSiS40. Version Worm screw with righthand pitch, casehardened HV 620 – 700, flanks and hole ground. Note for ordering Wheels/screws can only be combined to form a worm gear if they have the same centre distance and transmission ratio. Note A worm gear consists of a worm screw (shaft) and a worm wheel. Suitable for forming worm drives with a 90° shaft angle. A worm drive enables very large speed reduction ratios with a single stage. The toothing has the flank shape K. The engagement angle is 15°. The worm gears are prebored. The stated T2 output torques are the permissible output torques on the worm wheel. These apply for an input speed of 2800 rpm of the worm screw. The worm gears are suitable for continuous operation at high speeds and high torques. Attention 22500171002 Screw polished only. 22500172002 Worm wheel with helical gear toothing.

Material: Housing steel plate. Wheels with thermoplastic rubber tread. Wheel body polypropylene. Version: Housing press formed. Double ball bearing in the castor head. Plain bearing in wheels. Note: Wheel axle threaded. Swivel and fixed castors with bolt hole. Electrically conductive wheels, non-marking grey. The ohmic resistance of the wheel is less than 10⁴Ω. Application: Electrically conductive wheels on swivel and fixed castors are used to protect against electrostatic discharge generated by transport equipment or the transported goods. Damage to sensitive goods and painful electrostatic shocks to the personal is so prevented.

Material: Housing thick steel plate. Tyres steel-wire reinforced elastic solid rubber. Wheel body welded steel. Version: Housing press formed. Reinforced fork, base plate and centre pin. Double ball bearing with hardened shells in the castor head. Precision ball bearings in the wheels. Note: These castors are particularly impact and shock proof and assure a high service life. Wheel axle bolted.

CDA develops and produces the VS 50, a semi-automatic hand-held capper suitable for both smooth and grooved caps. The capping heads are individually crafted (based on the provided samples during the order) to ensure precise handling of the caps. Consequently, introducing a new cap may necessitate the fabrication of a new capping head. The VS 50 can function as a standalone machine but is also available with various options: Mounted on a stainless steel mast (to be directly affixed to a workbench or stable work surface). Mounted on a mast with a fixing nut (for lateral attachment to a conveyor or rigid work surface). Installed on a 500mm x 350mm shelf. Positioned on a stainless steel chassis with wheels. Compact and user-friendly, this manual capping device offers convenience in operation.

316 stainless steel tank Model SCL1250 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for moving 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick closing lever with EPDM gasket Total emptying with stainless steel ball valve 40 MACON PVC discharge valve Identification plate

304 stainless steel tank Model SCL1250 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for movement 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick lever closure with EPDM seal Total drain with 40 MACON stainless steel ball valve PVC relief valve Nameplate

316 stainless steel tank Model SCL1000 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for movement 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick lever closure with EPDM seal Total drain with 40 MACON stainless steel ball valve PVC relief valve Nameplate

304 stainless steel tank Model SCL1000 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for movement 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick lever closure with EPDM seal Total drain with 40 MACON stainless steel ball valve PVC relief valve Nameplate

316 stainless steel tank Model SCL750 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for movement 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick lever closure with EPDM seal Total drain with stainless steel ball valve SMS 51 MALE PVC relief valve Nameplate

304 stainless steel tank Model SCL750 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for movement 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick lever closure with EPDM seal Total drain with 40 Macon stainless steel ball valve PVC relief valve Nameplate

Specifications material: steel loading capacity: 150kg wheels: tyres: rubber dimensions: O146mm dimensions: 47 x 118 x 56cm platform: 31 x 21c

BM.100 Rail Grinder - HONDA 4-stroke petrol engine, 2.1 KW - Flexi-Horse, length 1.50 m. - Ø 90 and 72 mm Grinding Wheels ( Face Wheels) - Ø 80 and 125 mm Grinding Wheels ( Flat) - Weight = 23 Kg MP.10 Rail Grinder - ROBIN 2-stroke 2.4 KW - 78,5 cm³ - Flexi-Horse 1.50 m - Ø 50 and 72 mm Grinding Wheels ( Face Wheels) - Weight = 10 Kg - Grinding of Fishplate Joints with Disks (Ref. 1039-M.5 / 1039-H / 1039-P) OPTIONS : Electric Motor 1300 W (Ref. MPE.10) MP-120 Rail Grinder - HONDA 4-stroke petrol engine - 4.4 KW - Flexi-Horse, length 3.50 m - Face Wheel Ø 150 mm - Weight = 59 Kg MP-121 Rail Grinder Manual Grinding of Rail Welds allowing to ensure a perfect finish grinding and dressing. - HONDA 4-stroke petrol engine 8 CV - 6 KW - Steel Frame with inflatable Wheel - Insulating Sheathed Flexible Transmission length 4.5 m - Quick coupling for Ginding Wheel Handling - Ø 125 or 150 mm Grinding Wheels (Face Wheels) - Ø 150 or 200 mm Grinding Wheels (Flat) - Driving control for starting or

USE : Renewal of rails and Crossings, (Lifting and Lining of Track). Loading and Unloading Switches and Crossings on Track Motor Car. ADVANTAGES : Highly Safety Equipment. Easily to carry and to transport . Horizontal Beams made from reinforced aluminium alloy. Hoists equipped with a safety brake. Steel Legs with Wheels and Handles for carrying on rails. Length Horizontal Beam (m) Lifting Capacity Kg) Quantities Ref. Hoist Control Weight Gantry Crane alone (kg) Fixed Leg Adjust. Leg Hoist and Tong 1.2 990 1 1 1 559/1 Crank Handle 49 Small 1.8 990 990 1 1 2 1 1 560/2 560/23 Crank Handle Crank Handle 75 86 Medium 3 1600 1980 1600 1980 2 2 2 2 1 2 1 2 560/3 560/31 560/32 560/33 Crank Handle Crank Handle with Chain with Chain 120 Large ( *) 3.5 3200 2 2 560/34 with Chain 130 Super-large SNCF AGREEMENTS Agreed Models Nos. Agreements 560/2 and 560/23 IMT 07131 560/3 IMT 07132 OPTIONS : - ( * ) The Ref. 560/34 with Pivoting Transport Wheels Device allowing to circulate on auxiliary la

MATERIAL LOAD CAPACITY (Tons) REFERENCES Net Weight Single Trolley for Standard Gauge 1.44 m (Kg) SINGLE TROLLEY with Plateform Pivoting and Rail Sliding With Bracket Rail Loading (*) Steel Aluminium Steel Steel Steel Steel 5 5 10 15 20 50 S5 AS5 S10 S15 S20 S50 S5PC - S10PC S15PC - - - - S10PCR S15PCR - - 100 80 175 240 270 330 (*) BRACKET RAIL LOADING The Bracket can be positionned either : - on the centre of the Trolley - at one of the Ends of the Trolley These Trolleys allow the Rail LOADING, UNLOADING and TRANSPORTING on Work-Sites. Trolley with Bracket - Ref. PCR OPTIONS : - Wooden Brake Device (or polyurethan body), operating with 1 Handle Lever. (or Tightening Screw). - Wheels (in Steel, aluminium or Nylon) as your Request. See also : LIGHTWEIGHT PLATFORM TROLLEYS (MANUAL OR MOTORIZED) A Wide Range of Lightweight Plateform Trolleys are available (See Details on Transportation and Silent Rails Panel) USE : Various Equipments Transporting on Track as : Rails, Sleepers, All m

BM.100 Rail Grinder - HONDA 4-stroke petrol engine, 2.1 KW - Flexi-Horse, length 1.50 m. - Ø 90 and 72 mm Grinding Wheels ( Face Wheels) - Ø 80 and 125 mm Grinding Wheels ( Flat) - Weight = 23 Kg MP.10 Rail Grinder - ROBIN 2-stroke 2.4 KW - 78,5 cm³ - Flexi-Horse 1.50 m - Ø 50 and 72 mm Grinding Wheels ( Face Wheels) - Weight = 10 Kg - Grinding of Fishplate Joints with Disks (Ref. 1039-M.5 / 1039-H / 1039-P) OPTIONS : Electric Motor 1300 W (Ref. MPE.10) MP-120 Rail Grinder - HONDA 4-stroke petrol engine - 4.4 KW - Flexi-Horse, length 3.50 m - Face Wheel Ø 150 mm - Weight = 59 Kg MP-121 Rail Grinder Manual Grinding of Rail Welds allowing to ensure a perfect finish grinding and dressing. - HONDA 4-stroke petrol engine 8 CV - 6 KW - Steel Frame with inflatable Wheel - Insulating Sheathed Flexible Transmission length 4.5 m - Quick coupling for Ginding Wheel Handling - Ø 125 or 150 mm Grinding Wheels (Face Wheels) - Ø 150 or 200 mm Grinding Wheels (Flat) - Driving control for starting or

PRINCIPLE OF THE WHEEL: Wheel mounted free to rotate, on bearings in the hub.  The axle is fixed, mounted on external, removable bearers. The wheel is mounted according to mountings 97.1 or 97.2, non-motorisable, with 2 cast iron, steel or welded steel bearers. For the motorisable wheel: see p. 44, mounting 97.3.

Use Each unit has 4 steel, wide-tread wheels. The wheels are mounted between steel side plates, the whole being surmounted by 2 U beams. The U beams are not removable. The side plates can only be made removable on request. Electrical insulation on request. The lorries can be easily lifted of the track and placed on the track-side verge. The loads must be uniformly distributed. Higher tonnages must be considered at the design stage according to the rail and use outside the private siding area. The dimensions and the force are given for the reference track. These lorries can be produced for a different gauge on request. For the transport of all types of materials by rail. These devices are made up of two units, completely independent of one another or linked by a coupling bar (optional). They can also be used for mobile storage. The units can be spaced at the desired distance, according to the loads to be transported.