Results for
PIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN 2566, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN1000, 1/2"-24" Pression : PN6-PN100, 150Lbs-2500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN 2631-2638, ANSI B16.5 B16.47, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-60" Pression : PN2.5-PN400, 150Lbs-2500Lbs Matière : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN 2642, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN600, 1/2"-24" Pression : PN2.5-PN40, 150Lbs-1500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quoteACTON S.A.
France
Hexagon Head Machine Screw With Flange A2 stainless steel - DIN 6921
Request for a quoteNORELEM FRANCE
France
Investment cast 1.4308 stainless steel. ISO 4762 cap screw and ISO 4032 hex nut, stainless steel. From ø30 mm ISO 4017 hex head bolt, stainless steel. Version: Electropolished. Note: The tube clamps with diameters 30 and 40 mm have a silicone sleeve that protects the thread of the hex head screw from contamination and damage. On request: Clamping levers for tightening. Accessory: - Round and square tubes 29050
Request for a quoteNORELEM FRANCE
France
Material, version: 1. Sealing cap red Polyamide 66 thermoplastic. 2. Filler sieve black Polypropylene thermoplastic. 3 Flange electro zinc-plated steel. 4. Fastening screws electro zinc-plated steel. 5 Flange seal cork. 6. Chain brass.
Request for a quoteNORELEM FRANCE
France
Steel. Toothed pulleys without aluminium rim flanges. Version Steel phosphated. Aluminium bright. Note Standard HTD profile with metric pitch (halfround toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter. The pulleys may be recessed on the sides.
Request for a quoteNORELEM FRANCE
France
Aluminium. Rim flanges, steel. Version Aluminium bright. Steel electro zincplated. Note Standard T profile acc. to DIN 7721 T2 with metric pitch (trapezoidal toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter.
Request for a quoteNORELEM FRANCE
France
Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.
Request for a quotePIRPED INTERNATIONAL
France
Standards : EN 1092-1, DIN 2527, ANSI B16.5 B16.47, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-60" Pression : PN2.5-PN400, 150Lbs-2500Lbs Material : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standard :ASME B16.36 Dimension : 1"-24" Pressure : 150Lbs-2500Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quotePIRPED INTERNATIONAL
France
Standards :EN 1092-1, DIN 2576, ANSI B16.5, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-24" Pressure : PN2.5-PN100, 150Lbs-900Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…
Request for a quoteARSILAC
France
Model SPABP2800 304 stainless steel tank Full floating cap INOX 316L Swivel stem with stainless steel handle Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage Round door Diameter 400 positioned flush with the shell bottom DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2900 mm Total height (with stem) 3410 mm
Request for a quoteARSILAC
France
304 stainless steel tank Model SPABP2800 Full floating cap INOX 316L Swivel stem with stainless steel handle Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Stem Diameter 1200 mm Height (without stem) 2900 mm Total height (with stem) 3410 mm
Request for a quoteARSILAC
France
304 stainless steel tank Model SPABP2150 Full floating cap INOX 316L Swivel stem Circular door Diameter 400 mm positioned flush with the shell bottom Honeycomb cooling belt H. 500 mm on the ferrule Clock thermometer and thermowell Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2400 mm Total height (with stem) 2910 mm
Request for a quoteARSILAC
France
304 stainless steel tank Model SPABP2150 Full floating cap INOX 316L Swivel stem Circular door Diameter 400 mm positioned flush with the shell bottom Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 macon, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2400 mm Total height (with stem) 2910mm
Request for a quoteARSILAC
France
Model SPABP2150 Full floating cap INOX 316L Swivel stem Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2400 mm Total height (with stem) 2910 mm>
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Steel flange - Import exportNumber of results
18 ProductsCountries
Company type