Results for
THOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
Our metal work services are fully adapted to meet your facilities maintenance and safety needs : replacement and/or modification of walkways installation and/or modification of ventilation ducts manufacture and installation of floors and access doors on production lines welding of reinforcements on to machine frames modification of fabric drive systems, presses, cylinders and rollers modification of pneumatic and hydraulic control systems installation of conveyor lines mechanical protective equipment: grids, gratings, walkways and doors machine guarding: stainless steel, steel, etc. We guarantee a highly flexible and adaptable service, while meeting all of your production requirements and maintaining the configuration of your existing facilities.
Request for a quoteTHOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
We ensure that your facilities are compliant with the latest legal requirements in terms of safety: Mechanical protection devices: grids, grills, gratings, doors, locks, securing with mechanical interlocks, etc. Electrical protection devices: sensors, optoelectronic protective equipment, proximity sensors, encoders, identifiers (laser readers, camera readers, etc.), safety switches, securing with electrical interlocks, etc. machine guarding: stainless steel, steel, etc. Immaterial protection equipment: photoelectric barriers, passages and controlled access with a scanner, etc. Hearing protectors Gas detectors and analysers in compliance with the national and European standards in force. Our comprehensive services include: certificates of incorporation for machines complete technical documentation controls by competent independent organisations
Request for a quoteNORELEM FRANCE
France
Clamping levers with safety function prevent changes in the locking point through accidental opening or closing. In the default position, the lever can be freely rotated and has no connection to the clamping point. The grip lever only engages when pushed down and the clamp can the loosened or tightened. A spring sets the lever automatically into the default position when released.
Request for a quoteNORELEM FRANCE
France
Housing thermoplastic. Version: Operating principle: Magnetic. Rating: IP67. Note: If the actuator is within the switching range (safety door closed), the safety contacts and, if applicable, the signal contacts of the safety switch are activated. The contact is thus closed via a magnet (magnetic field). Form A: Actuator on one level to the safety switch. Form B: Actuator offset by 90° to the safety switch.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CORIMA HEALTH BEAUTY
France
We can help you draw up your cosmetics files, a requirement under the European Cosmetics Regulation. You can entrust us with your data, and we will analyse it and draw up your DIPs.
Request for a quoteCORIMA HEALTH BEAUTY
France
We can help you validate the ingredients making up your dietary supplement. In addition to regulatory validation, it is important to check that your ingredients do not run the risk of their use being restricted or banned in the short or medium term, and to check whether their presence means that you will have to include precautions for use on your labelling. All of this must be done before the development phase, and it is essential.
Request for a quoteCOMITRONIC BTI
France
Add 4 power safety lines at 8A/250V with a safety PLC or control box without loss of Safety Class Compact format 22.5 mm/removable terminals Level of performance: PL = e Safety category: 4 Safety Integrity Level: SIL 3 Cycle before dangerous failure: B10d=100,000 at 5A Risk duration: 20 ms max. Cable severing protection: yes (opening of safety lines) Safety contacts/diagnostics: 4x NO 8A/250V redundant / 1x NF redundant in series (test) and 8A/250V parallel (information) C4SX indicators: 2 LEDs C5SX indicators: 2 LEDs Reset: automatic Number of inputs: 1 (C4SX) and 2 (C5SX) Mounting: symmetrical DIN 35mm rail on DIN 50022 Mounting: IP 54 electrical box Electrical connection: Maximum 14 AWG (2.08 mm²) / 250V minimum Temperature: -20°C to +60°C
Request for a quoteCOMITRONIC BTI
France
Contactless "door lock" encoded detection Contactless "door open / closed" detection Unlock command with just one contact during serialization of products Emergency evacuation handle • Level of performance with AWAX controller: up to PL = e Safety category with an external controller: up to 4 • Cycle before dangerous failure: B10d = 1,000,000 • Bolt travel: 14 mm • Bolt diameter: 24 mm (beveled for "under-voltage" closed position or "lock" mode) • Shearing strength: 2000 N • Gap between strike and lock: 2 to 4 mm (adjustable when assembling, recommended to 4 mm) Maximum lateral offset between strike and lock: +/- 2.5 mm • Maximum angular displacement between strike and lock: +/- 5° • Safety locking contacts: 2 x NO 2A/50V • Safety door contacts: 2 x PNP/500 mA • Unlock command: PLC-compatible (12~30 VDC/2~5 mA) • Fault Diagnosis: bolt stuck, power out of specification, temperature out of specification, electromagnet failure, serialization failure • Reset: on command • "SMART consumption" for minimal power consumption when connected in series • Auxiliary release: female triangle key 8 mm x 14.2 mm (optional) • Attachment: 4 M6 screws (screw covers supplied, screws not included) • Mounting position: 2 (door pulling, door pushing) • Material: PA6 fiberglass reinforced • Electrical connection: very resistant 50 cm PUR UL20549 cord with M23 connector or cable (contact us) • Water resistance: IP 65 • Operating temperature: -15°C to +45°C • Marking: screen printed + serial no. for traceability • Reference for evacuation handle: AT
Request for a quoteCOMITRONIC BTI
France
Contactless "door lock" encoded detection Unlock command with just one contact during serialization of products • Cycle before dangerous failure: B10d = 1,000,000 at 200mA • Bolt travel: 9 mm • Bolt diameter: 12 mm • Shearing strength: 1000 N • Distance between latch and lock: 0 to 4 mm (adjustable when assembling, recommended to 4 mm) • Maximum lateral displacement between strike and lock: +/- 0.8 mm • Maximum angular displacement between strike and lock: +/- 5° • Safety locking contacts: 2 x NO 0.4A /24V redundant and • Unlock command: PLC-compatible (12~30 VDC/2~5 mA) • Diagnostic error: Auxiliary output indicates unlocking • Reset: on command • Infinite automatic offset control when connected in series: minimal consumption • Auxiliary release: key supplied (free key in lock mode; captive key in release mode) • Attachment: 4 M4 screws (screw covers included) • Mounting position: 1 • Material: PA6 fiberglass reinforced • Electrical connection: very resistant 50 cm or 130 cm PUR UL20549 cord with M12 connector or cable (contact us) • Water resistance: IP 65 • Ambient temperature: -5°C to +40°C. • Marking: screen printed + serial no. for traceability
Request for a quoteSADEV INOX
France
Grade : 304 Wire diameter: 1,04 mm Ref : 13014 Product : Canister Lenght: 68 meters Weight: 454 gr
Request for a quoteSADEV INOX
France
Grade : 304 Wire diameter: 0,81 mm Ref : 13007 Product : Canister Lenght: 112 meters Weight: 454 gr
Request for a quoteSADEV INOX
France
Grade : 304 Wire diameter: 0,63 mm Ref : 13006 Product : Canister Lenght: 185 meters Weight: 454 gr
Request for a quoteSADEV INOX
France
Grade : 304 Wire diameter: 0,51 mm Ref : 13005 Product : Canister Lenght: 280 meters Weight: 454 gr
Request for a quoteResults for
Safety - Import exportNumber of results
15 ProductsCountries
Company type