Sealing - Import export

A designer of dynamic and static sealing solutions, Progress Silicones offers Tixan Air Gonflable – a range of inflatable seals. Whatever your needs and sector of activity, we have the solution.

Flat gasket for gas from DN12 to DN50 In synthetic-Rubber Fibre in conformity with NF E29-533 standard In Nitrile (NBR) 85 +/- DIDC in conformity with EN549 A2 H3 standard

Laminated with a non-woven backing that is extremely flexible and designed to accept all roof coatings, paints or liquid urethane finishes. Excellent for sealing the edges of concrete basements or terraces prior to pouring the liquid urethane finish. Tapes can be installed in just a fraction of the time that it takes to install or repair surfaces using conventional flame & heat welding techniques.

Typically used as a vapour and air barrier for sealing joints of insulation panels installed within the walls or ceilings. Also used to ensure an air tight seal between timber floors or window frames as well as irregular construction surfaces AdhesionXtreme® Tapes provide an immediate, permanent and guaranteed waterproof seal to all common roofing and building material substrates including polymer & rubber based membranes such as PVC, TPO & EPDM as well as bitumen, concrete, brick, tile, glass, wood and all metals including zinc, copper, lead & galvanized surfaces.

Elastomer NBR. Brace ring and tension spring steel. Rotary shaft lip seals are readytoinstall seals for sealing rotating shafts. They are made from an elastomer outer sleeve and an internal bracing shim. The tension spring ensures increased pressure of the lip against the shaft and supports static sealing. Form A DIN 3760 (ISO 6194/1) version, smooth OD. Form AS DIN 3760 (ISO 6194/0) version, smooth OD with extra dust lip to protect from external dirt. The material NBR has a high wear resistance and is resistant to motor fuels, oil, hydraulic oil and lubricating grease. Operating limits Circumferential speed (m/s) ≤12 Pressure (MPa/bar) ≤0.05/0.5 (rotary shaft lip seals are generally meant for unpressurised operation).

Orings are universal sealing elements used to seal against liquid or gaseous median. They are suitable for static and minor dynamic applications. Orings can be used for radial and axial sealing. The sealing occurs during installation by the radial or axial compression of the crosssection. During operation, the median pressure increases the deformation of the Oring and so increases the sealing effectiveness. For best sealing effectiveness, the Oring should have the largest possible crosssection. During installation the correct groove size, compaction, elongation/compression should be ensured. By static use the compaction should be 15 30% of the crosssection. By dynamic use it should be 10 18% (hydraulic), 4 12% (pneumatic). With regard to the ID, when installed the Oring should be stretched max 6% compressed max 3%

TYPE OF MACHINES : SERMATEC, AUCOUTURIER, .... In order to seal packging properly we can also supply sealing wheels, heat resistors, insulation and gearings.

TYPE OF MACHINES : SERMATEC, AUCOUTURIER, .... In order to seal packging properly we can also supply sealing wheels, heat resistors, insulation and gearings.

Allows for storage after cleaning (optionally calibration) varied granular products (peas, flageolet beans, broad beans, white/red beans, chickpeas, lentils etc.) Fully adjustable flow for a steady flow of your products at the output. We also offer sealed hopper models that allow for static soaking of dry vegetables. To adapt to your needs, our hoppers are available in different formats.

Brass filter for flexible spout

Seal for flexible spout

Our DN200 thermoforming machine is known for its very compact footprint and small budget. Its simplicity and compactness are ideal for small productions and product tests up to 5,400 cups/hour or 10,800 miniportions/hour. Our equipment is designed to make all operations at ground level. FFS packages are shipped in plastic reels and thermoformed in your plant. Cups are filled and sealed in ultra-clean conditions. The filling volume goes from 10 to 240 ml. Our machine can handle various materials (PS, PP, multilayer). DN200 is optimal for industries where flexibility and affordability are critical.

Material, version: 1. Sealing cap red Polyamide 66 thermoplastic. 2. Filler sieve black Polypropylene thermoplastic. 3 Flange electro zinc-plated steel. 4. Fastening screws electro zinc-plated steel. 5 Flange seal cork. 6. Chain brass.

Race body steel. Wipers plastic/felt. Longitudinal sealing lips rubber. Rollers steel 1.3505. Note Roller carriage with lifetimelubrication roller bearings and wipers which lubricate the system when moving. By simply moving the centre cam roller, the roller carriage can be adjusted so that it is free of play or has the desired pretension in the rail. High travel speeds up to 7 m/s and extremely quiet (faster and quieter than systems that use recirculating balls). The wipers are fitted with an oilsoaked felt. This felt is in constant contact with the track to ensure perfect lubrication. The felts can be recharged using an oil pump through the lubrication points on the front. On request Roller carriages with 4 or 5 rollers.

Consumer goods, labels, cardboard packaging... we have the equipment and eco-responsible suppliers to offer you high-performance finishes that respect the environment. Thermobonding, pure glue adhesion, direct gluing - depending on your specifications, we can apply adhesives to paper and textiles using several processes. The innovative, sustainable solution to meet your needs: - Thermobonding: We apply a heat-activated adhesive base. The thickness varies according to the material selected and technical constraints. In many cases, the thinner the substrate to be coated, the more heat-activated it will be. - Pure adhesive bonding: Ideal for solidifying and stiffening a structure, it offers high resistance to any environment.

Ductile iron push-in flanges with express joints MAIN FEATURES - Ductile iron body EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - Express seal accessories supplied - Complies with standard EN 545 - A.C.S. certified product

We manufacture rough or fully machined seat and sealing ring for ball and butterfly valves in : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request

We manufacture rough or fully machined housing rings for engines and sealing housings for braking system Stainless steel : X5CrNiCu17-4

We manufacture rough or fully machined bearing housing, liner and sealing system for propulsion line in copper alloys or stainless steel Cast in Bronze (CuSn10Zn, RG10, CuSn12...), Aluminium Bronze (CuAl10Fe5Ni5), Nickel Aluminium Bronze or Stainless steels. Liners cast at LBI are proposed either rough machined or fully machined in the bore (Inside diameter), ready to be shrunk on the shaft. LBI is recognised for its ability to supply high quality liners to the best conditions worldwide either for classic vessels, or for military vessels as well as for ice-going vessels. Liners are controlled and supplied with a 3.2 certification.

We produce seal joints and bearings for propeller shaft in pure copper, aluminium bronze, tin and lead bronze as well as brass. Pieces are delivered as-cast, rough or fully machined.

Our EasyGel Protect® coring solutions guarantee you a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). SPECIFICATIONS • Transparent core tube with decontaminable accessories and its equipment. BENEFITS • Cheap Solution • Easy to use • Reproducible operating mode • Clean Site • Protection of operators and their environment • Limitation of handling and risks related to height working

Our EasyGel Protect® coring solutions guarantee you a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). SPECIFICATIONS • Transparent core tube with decontaminable accessories and its equipment. BENEFITS • Cheap Solution • Easy to use • Reproducible operating mode • Clean Site

These enclosures consist of polycarbonate (operating temperature : -40°C to +125°C). The lid and the base are equipped with a tongue and groove sealing system with a neoprene gasket.

Adapted to high temperatures, PTFE - Polytétrafluoroéthène - is also well known as Teflon. PTFE has good chemical resistance and low friction coefficient. It is used for sealing functions, as membrans, gaskets, O-rings, or for electrical insulation.

Rings, gaskets, inserts, membranes, balls, washers... SPN machines simple and complexes parts for its customers from multiple area activities. SPN is involved in the production of batches from 1 to 10 000 parts. Positioned on technical plastics, our customer call on us for materials like : PCTFE, PFA, PVDF, FEP, ETFE and ECTFE (Fluoropolymers) but PEEK, VESPEL, POM, PA...

The expertise of AV Composites in the field of gluing and multi-material assembling justifies our choice to provide the market a new range of technical panels in the field of closing. As part of improving thermal performance in the field of insulation closures, AV Composites offers a comprehensive range of grooved sandwich panels and accessories destined to the manufacturing of insulating shutters, doors, gates and aluminum fences. For several years, the market of closing and specially the insulated aluminum shutters rose sharply in constant search of thermal insulation materials which require no maintenance. With the brand NOVAFERMT ® AV Composites revolutionized the closure sector by offering the market a revolutionary invention: for the first time in the history of the sandwich insulating panel, AV Composites created the first powder coating panel (European Patent). This new product made for the production of shutters, doors, gates, aluminum fences, made of a high temperature resis

The conservatory market has been changing over several years ; a conservatory is now considered as a real living room integrated to the house, and usable all year long. With NOVATOIT ® brand, AV Composites completely revolutionized the conservatory market offering innovative and technical solutions in order to answer different issues. NOVATOIT ® includes all the panels from the scope of the conservatory having a constant need for technical solutions to improve the thermal performance, acoustic and esthetic.

This tape features the adhesive formula on both surfaces and is designed for sealing between two substrates of either similar or dissimilar materials AdhesionXtreme® Tapes provide an immediate, permanent and guaranteed waterproof seal to all common roofing and building material substrates including polymer & rubber based membranes such as PVC, TPO & EPDM as well as bitumen, concrete, brick, tile, glass, wood and all metals including zinc, copper, lead & galvanized surfaces.