Rods - Import export

Rods for ball bushings and plain bearings Ø10, 12, 16, 20, 25, 30 et 40 mm Guide rods with tapping at both ends (except stainless steel just 1 side) 4 matters hardened steel, chromed steel, stainless steel 304L, hardened stainless steel Several lenghts and special length on request.

ETA-08/0231 * Non covered by E.T.A.

ETA-08/0231 * Non covered by E.T.A.

This item refers to DIN 976 but P6.6 material is not guaranteed by norms

Threaded Rods - Length 1 Meter Brass - DIN 976

Steel 1.0718 or stainless steel 1.4305. Version: Electro zinc-plated steel. Bright stainless steel. Note: Pin with groove, suitable for DIN 71752 clevis. Secured with a DIN 6799 E-type circlip (alternatively a KL or SL clip). When combined with a suitable clevis and tang, forms a fully functional clevis joint.

Clevis and pin, steel 1.7225 Version: Electro zinc-plated. Note: These clevises were developed as accessories for rod ends. The clevis opening size C was chosen to accept rod end joints. Suitable for rod ends 27625, 27626, 27627 and 27628.

Copper parts

Dimension : M12-M100, ½" - 4", Length as per request Surface treatment : Plain, Zinc, ZnNi, hot-dip galvanized, PTFE Material : Carbon Steel, Alloy, Stainless Steel

These bearing blocks permits to realize linear tables with 2 guide rods. Guided by 4 ball bushings and protected by 4 wiper seals. Quadruple bearings or bearing blocks These bearing blocks (or quadruple bearings blocks) permits to realize linear tables with 2 guide rods. Guided on 4 ball bushings and protected by 4 wiper seals. The housing is in anodized aluminium. In option, for dusty environment additionnals wipers in nitrile (/RNI) or polyurethane (/RPU). With 2 guide rods in hardened steel, you can easily make a precision linear table that will withstand significant torques and loads (according to the length of the rods). These blocks are interchangeable with the bodies of Type 306 linear tables, Type 309 trapezoidal screw tables, Type 308 ball screw tables and Type 307 pneumatic cylinder tables. They can therefore be the basis for a special execution of these products.

Floating rod coupling for pneumatic, electric or hydraulic cylinders Zinc steel or stainless steel 304L With axial play or adjustable play Floating coupling for cylinder rod These rod couplings make it possible to connect the rod of a pneumatic cylinder (or electric) to any part to be set in motion while avoiding any stress on the rod. They are available in 2 versions . with axial play (<0.20 mm) usual pneumatic applications and for pushing applications . with adjustable play for positioning applications => The version with axial play allows a radial compensation of the axis of the cylinder rod, it’s for usual pneumatic applications => The version with adjustable play allows the axial play to beRod coupling with adjustable axial play – reduced by screwing the cylinder rod against the internal pin and then unscrewing it slightly (then lock with the cylinder rod nut against the coupling) – removed by screwing the cylinder rod against the internal part (with tightening)

Axon' expertise in PTFE insulated wires and cables has enabled the company to offer different PTFE based products : tubes, rods, profiles, films, glass cloth impregnated with PTFE, desiccant bags, Celloflon® tapes, etc... They all take advantage of the mechanical, chemical, thermal and electrical characteristics of the PTFE (polytetrafluorethylen). Celloflon® is an expanded PTFE material patented by AXON'CABLE Advantages Good temperature resistance (-200°C to +260°C) Low dielectric constant Non adhesive properties Non flammability Chemical resistance, … Biocompatibility Construction Tubes can be used as cable insulation, cannulae, tubes for liquids or hot gases (e.g assemblies for ink jet printing). Various versions : from ultra thin tubes to tubes with specific diameters Various colours : natural, black, yellow, red, orange, bicolour, spiral, … Tubes for micro-catheters with walls as thin as 10 µm PTFE multilumen tubing Axon' offers a wide range of rods specially used as fillers. They are made with PTFE or celloflon® (porous PTFE).

Axon' expertise in PTFE insulated wires and cables has enabled the company to offer different PTFE based products : tubes, rods, profiles, films, glass cloth impregnated with PTFE, desiccant bags, Celloflon® tapes, etc... They all take advantage of the mechanical, chemical, thermal and electrical characteristics of the PTFE (polytetrafluorethylen). Celloflon is an expanded PTFE material patented by AXON'CABLE Advantages Good temperature resistance (-200°C to +260°C) Low dielectric constant Non adhesive properties Non flammability Chemical resistance, … Biocompatibility Construction Tubes can be used as cable insulation, cannulae, tubes for liquids or hot gases (e.g assemblies for ink jet printing). Various versions : from ultra thin tubes to tubes with specific diameters Various colours : natural, black, yellow, red, orange, bicolour, spiral, … Tubes for micro-catheters with walls as thin as 10 µm PTFE multilumen tubing

Thermalux® Polysulfone (PSU) is an amber colored, semi-transparent, heat-resistant, high performance engineering thermoplastic that offers higher heat resistance and better hydrolytic stability than polycarbonate (PC). It retains its good mechanical properties when exposed to steam and other sterilization techniques. We offer it in natural light amber in either rods, films and sheets.

With the new tightening procedures for cleaning and disinfecting implant ancillaries, PPSU offers an interesting solution guaranteeing a longer life cycle for products. Though it costs usually more than other medical grade polymers (POM, PP), it can nevertheless prove to be more economical in the long term due to its durability. This is especially true for complex designs which are expensive to machine. PPSU does not have any problems with the cleaning & pre-disinfection products. Our material is lot controlled, serialized and is delivered with a certificate of conformance. Coloured resin has been tested under ISO10993/5/10/11/18. The material is not for permanent implantation. PPSU behaves very well after a large number of sterilisation cycles in an autoclave at 134°C/273°F, it can be sterilized through other methods (ETO; gamma, plasma, dry heat). it is polishable for a perfect finish.

PROPYLUX® HS products deliver the required attributes for orthopedic applications including biocompatibility, chemical resistance and dimensional stability. Launched in 2004 by Westlake Plastics Europe, PROPYLUX® HS has gained wide acceptance by orthopaedic device manufacturers in Europe. At a similar price point as Pomalux, PROPYLUX® HS offers superior dimensional stability performance when processed through repeated 134°C Prion autoclaving cycles.The material also provides excellent chemical resistance to disinfecting and cleaning solutions and exhibits a very good balance of strength, toughness and ductility. As such, PROPYLUX® HS is well suited for use in applications including trial heads and cups for hip implants, knee provisional trials and impactor applications. The PROPYLUX® HS product line consists of 15 colors and 13 diameters. All colored materials are made with FDA compliant ingredients and the shaped rods have been tested and comply with key parts of ISO 10993.

The main materials required by our customers are : PTFE, PCTFE, PFA, FEP, ECTFE, ETFE, PVDF. These materials can be delivered in shapes of Rods, Sheets, Tubes and films Thanks to a wide range of molds, we will be able to get closer to your finished dimensions.

FOR USE IN CONCRETE: 4 standard types Ø 16 - L 150 - F 70 mm Ø 16 - L 250 - F 125 mm Ø 18 - L 250 - F 125 mm Ø 20 - L 250 - F 125 mm All lengths on request, supplied with 2 HM nuts fitted, class 5.

Grade : 316L Wire diameter: 3 mm Ref : 14038 Product: Tube Pcs per tube: 0 Weight: 1,5 Kg

Grade : 302 Wire diameter: 1,4 mm Ref : 11335 Product: Tube Pcs per tube: 40 Weight: 500 gr

Grade : 302 Wire diameter: 0,6 mm Ref : 11526 Product: Tube Pcs per tube: 45 Weight: 100 gr

Ø 2 mm Stainless steel rods 304 1.00Kg 40M

Ø 1,5 mm Stainless steel rods 304 1.00Kg 70M

Ø 6 mm Stainless steel rods 304 2.67Kg 12M

Ø 1 mm Stainless steel rods 304 0.50Kg 80M

Ø 0,6 mm Stainless steel rods 302 0.10Kg 45M

Ø 0,5 mm Stainless steel rods 302 0.10Kg 64M

Ø 0,3 mm Stainless steel rods 302 polished 0.01Kg 18M

Ø 0,2 mm Stainless steel rods 302 polished 0.01Kg 50M