Results for
THOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
Our metal work services are fully adapted to meet your facilities maintenance and safety needs : replacement and/or modification of walkways installation and/or modification of ventilation ducts manufacture and installation of floors and access doors on production lines welding of reinforcements on to machine frames modification of fabric drive systems, presses, cylinders and rollers modification of pneumatic and hydraulic control systems installation of conveyor lines mechanical protective equipment: grids, gratings, walkways and doors machine guarding: stainless steel, steel, etc. We guarantee a highly flexible and adaptable service, while meeting all of your production requirements and maintaining the configuration of your existing facilities.
Request for a quoteAVM AUTOMATION
France
Pneumatic retractable stop Locking by toggle joint action Adjustable stop screw Operating principle of the retractable stop This retractable stop is drived by a doubleacting pneumatic cylinder. It is retracted by a 90 ° rotation of the finger. When it is engaged to stop the moving element, it is mechanically locked by a toggle joint action. The retractable finger supports an impact force of 2250 N or less, it is generally necessary to provide damping at the point of contact (elastic or hydraulic depending on the application). Detection by 2 inductive Ø8 detectors is optional. Using of the retractable pneumatic stop There are 3 common applications for this retractable stop • Create an intermediate position for a manipulator or a linear pneumatic gantry • Create a conveyor stop • Referencing a product on a workstation For an intermediate position of the pneumatic manipulator, a hydraulic shock absorber must be placed opposite the stop screw.
Request for a quoteAVM AUTOMATION
France
Our H guides can be adapted to many electric actuators of the market (with threaded rod or tapped rod). Also available in anticorroding version (AluStainless Steel)
Request for a quoteAVM AUTOMATION
France
For electric cylinders ISO 15552 size 32 to 100 Selfcentering rod coupling without axial play adapted to positioning Principle of rod coupling with reduced axial play Rod coupling with adjustable axial playThe difference with the ISO 15552 pneumatic cylinder guide units is at the level of the cylinder rod coupling on these guides for electric cylinders, the selfaligning rod coupling has no axial play (or a reduced axial play) depending on the assembly carried out, these units without axial play are therefore suitable for positioning applications. For applications without positioning accuracy or with high radial loads in static, it’s possible to use the guide units for pneumatic cylinders with a guide on plain bearings, since the rod coupling has an axial play (<0,2 mm). Guides for nonISO actuators For electric actuators which are not ISO, we know how to adapt our guide units to most of the rod actuators on the market see Hguide for actuators.
Request for a quoteAVM AUTOMATION
France
Guides, delivered without motor, allows to realize systems with 1, 2 or 3 axes For LinMot® motors P0123, P0137, P0148 Stainless steel version for *SSC motors Presentation of the range of guides for LinMot® motors These guides are intended exclusively for cylindrical linear motors of the LinMot® brand and are broken down into 5 families LB modules for pick and place manipulators LE modules Gantry LR LH guide units comparable to guide units for pneumatic cylinders Guides in stainless steel LX and LW for motors * SSC Special features of the LE and LB modules On LE modules, for vertical applications, it’s possible to have a mechanicalpneumatic brake or a LinMot MagSpring. The LB23 module is equipped with pneumatic balancing (antifall in the event of a power outage but also for high speed by eliminating the impact of gravity).
Request for a quoteAVM AUTOMATION
France
These linear guide bearings are available in cylindrical short housings or prismatic long housings. Guided on ball bushings, bronze or polymer bearings. The housing is in anodized aluminium. To build your own linear guide These linear guide bearings make it possible to create a guide unit adapted to your needs and integrated into your machine You choose the diameter of the guide rods according to load capacity and rigidity, the type of guidance (bronze, polymer, ball bushings), the guide length (long prismatic or short cylindrical bearings) and the rods spacing according to the application. You can integrate any cylinder (type, standard, brand …) by using a cylinder rod coupling. You limit the number of parts by directly using a support of your frame and your end plate. A range of stainless steel guide bearings is also available Guide Type 34X You can also use bearing blocks
Request for a quoteAVM AUTOMATION
France
Pneumatic gripper with 2 or 3 concentric fingers Single acting with rear central air connection High clamping force External clamping and vertical using only Without detection Screwing gripper technology The technology of this gripper allows it to develop a very large clamping force (about 10x the force of a gripper) so as to obtain the necessary tightening torque in the following applications – screwing cosmetic or hygiene bottles, with or without spout – screwing of pots or cans with torque control – screwing of thermostatic subassemblies – screwing push buttons The central rear pneumatic supply and single acting makes it easy to mount on a rotating joint. Screwing bottles with pump spoutThe wide angle opening version is generally used for screwing vials with pump spouts. The 2finger version makes it possible to tighten square or prismatic caps, but also to reduce cycle time by let go the bottle radially by opening the gripper at the height of clamping
Request for a quoteAVM AUTOMATION
France
Pneumatic gripper with 2 concentric fingers Finger selflocking closed gripper (toggle joint action) Elastic absorption at opening Interest of 180 ° angle grippers Grippers with 180° opening angle are generally used to suppress a clearance movement because the open fingers allow the product to pass laterally, for example during a linear transfer or for maintaining a product on a turntable. Selflocking on closing by toggle effect These grippers use toggle technology that allows selflocking of the jaws in the last degree of closure and a large clamping force. They therefore remain locked even in the absence of air pressure. They can only be used for a grip from outside the piece and for parts with an identical grip dimension. The detection cam mounted on the axis of rotation allows the 2 inductive sensors to detect any desired position. The option « opening screw limitation » allows to adjust the opening stroke if the 180 ° are not sought
Request for a quoteAVM AUTOMATION
France
Pneumatic parallel gripper with 2 concentric fingers and long opening stroke. Very long prismatic guide for torsional torque resistance. Exceptional length/stroke ratio Interest of longstroke parallel grippers These pneumatic parallel grippers with long opening stroke can seize parts with very different sizes (example a range of bearings, a range of wheels …). The length of the sliders makes it possible to support fairly long jaws without the risk of buttressing. Exceptional length/stroke ratio and robustness The clamping force and guiding quality are constant throughout the stroke. The slides being mounted in parallel, these grippers have a very good stroke/length ratio. With a hard anodized body, a long prismatic steel guide, these parallel pneumatic grippers are reliable and robust. Mounting interfaces allow them to be integrated into a pneumatic handling assembly.
Request for a quoteAVM AUTOMATION
France
Handling pneumatic gripper with parallel clamping with 3 concentric fingers. The guide is prismatic and mechanism is completely protected Benefits of 3finger parallel tightening Although most handling applications are using parallel grippers with 2 fingers, because even in the case of cylindrical parts, Vshaped jaws allow a good grip. The use of a gripper with 3 fingers is preferred in 2 case – refocusing of the part along 2 axes during tightening – stability of a long cylindrical part clamped by its end In the particular case of screwing, we have a range of 3jaw grippers specifically dedicated to screwing Type 2913 grippers. Reliability and robustness of Type 24 parallel grippers With a hard anodized body and cylinder, prismatic steel guide, fully protected mechanism, these pneumatic parallel grippers are robust and reliable. The positions are detected by magnetic detectors (delivered separately) thanks to 2 Tgrooves on the upper face of the cylinder.
Request for a quoteAVM AUTOMATION
France
Handling pneumatic gripper with parallel clamping with 2 concentric fingers. The guide is prismatic and mechanism is completely protected. Benefits of 2finger parallel tightening The clamping of these parallel grippers is the most polyvalent clamping it allows to take pieces of slightly different sizes with the same jaws, to grab a piece in a limited space at opening, to seize the part by the inside or the outside … For very different sizes of parts, it’s possible to grip them without changing jaws with Type 25 parallel long stroke grippers. Reliability and robustness of Type 24 parallel grippers With a hard anodized body and cylinder, prismatic steel guide, fully protected mechanism, these pneumatic parallel grippers are robust and reliable. The positions are detected by magnetic detectors (delivered separately) thanks to 2 Tgrooves on the upper face of the cylinder. This groove is compatible with many detectors on the market to facilitate maintenance.
Request for a quoteAVM AUTOMATION
France
Motorization by integrated pneumatic cylinder Driving by rack and pinion system Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors The wrist of a manipulator arm These rotary modules are, for example, the wrist of a manipulator arm, the turner of parts on a conveyor or the axis of rotation of an oscillating manipulator. In general, they rotate the gripper that grips the part. These modules are equipped with hydraulic dampers and inductive sensors, the rotation guidance is ensured by 2 ball bearings that allow this module to be used in all directions, even with offcentered payload. Rotary cylinder without angular play at end of stroke The end stops located under the plate allow there to be no shock in the rack and pinion transmission and no angular play at the end of the stroke. The absence of angular play allows use in assembly or precise positioning applications with 2 positions and the absence of impact in rack
Request for a quoteARSILAC
France
304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon
Request for a quoteARSILAC
France
Model SPABP300 304 tank with pneumatic system On welded feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)
Request for a quoteARSILAC
France
304 stainless steel tank Model SPABP600 With pneumatic system On feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)
Request for a quoteARSILAC
France
304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap
Request for a quoteARSILAC
France
SPA100A model Flat bottom tank With pneumatic system Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ARSILAC
France
304 stainless steel tank with pneumatic system on welded feet Model SPABP500 Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)
Request for a quoteARSILAC
France
304 stainless steel tank SPA600 model With pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON
Request for a quoteARSILAC
France
304 stainless steel tank SPA700 model Pneumatic system Capacity 696 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON
Request for a quoteARSILAC
France
304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON
Request for a quoteARSILAC
France
304L stainless steel tank Model SPABP700 With pneumatic system On welded feet Effective capacity 696 liters Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)
Request for a quoteARSILAC
France
304 stainless steel tank Model SPABP1500 Pneumatic system Capacity 1500 L On welded feet Rounded bottom Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 Clear drawing with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet (tank without level
Request for a quoteARSILAC
France
304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet
Request for a quoteARSILAC
France
304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Bright annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clearing with stainless steel ball valve output 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet Cooling belt H. 500 mm Level indicator with stainless steel protection Circular door diameter 400 mm positioned flush with the bottom of the shell DIN 15 tasting tap Ladder support bar Clock thermometer
Request for a quoteARSILAC
France
TECHNICAL SPECIFICATIONS - 304 stainless steel tank - SPAIP SER 2300 model - Effective capacity: 2297 litres - 304 stainless steel wine rack - Flat bottom with 4 % slope - Bottom thickness : 2.0 mm - shell : 1.5 mm - Floating cap in 316L stainless steel - Complete pneumatic system - Swivel arm with stainless steel handle - Winch for lifting the floating cap - 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable - Rectangular door 420x530 mm flush with bottom of shell - Swivel bracket with stainless steel handle - Cooling coil with 4 rings on the shell - 2 additional cooling rings on the door - Sensor pocket positioned at the rear of the tank - Clock thermometer with immersion sleeve DIMENSIONS - Diameter 1400 mm - Height (shell) 1500 mm - Height (total) 2600 mm (with bracket) - Height of bowl + feet (500 mm): 2000 mm (without support)
Request for a quoteARSILAC
France
304 stainless steel tank SPAIP SER 2300 model 304 stainless steel wine keeper Flat bottom with 4% slope Bottom thickness 2.0 mm ferrule 1.5 mm 316L stainless steel floating hat Complete pneumatic system 6419 Swivel crane with stainless steel handle Floating hat lifting winch 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable Rectangular door 420x530 mm positioned flush with the bottom of the ferrule Swivel crane with stainless steel handle Cooling coil with 4 rings on the ferrule 2 additional cooling rings on the door Thermowell for probe positioned at the back of the tank Clock thermometer with thermowell Stainless steel DIN 15 tasting tap Level valve Diameter 20 with stainless steel protection clear draft and total drainage with square flange 100 x 100 + ball valve on flange outlet 40 MACON Lifting rings Stainless steel ladder support bars Diameter 1400 mm Height (shell) 1500 mm Height (total) 2600 mm (with stem)
Request for a quoteTOTALENERGIES LUBRIFIANTS
France
Extreme pressure grease, formulated for the lubrication of plain bearings of applications, operating at medium and slow speeds, where the grease is required to support exceptional heavy loads in wet conditions. Suitable for applications in civil engineering and industry, where the grease is submitted to water wash-out and pollution. Suitable as EP multi purpose grease, slow moving heavily charged industrial and "off road" applications where water is in frequent contact with the grease. Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.
Request for a quoteTECHNIFLEX
France
Length 1m Width 0.40m Standard automatic inflating Techniflex has been manufacturing shelters with high pressure pneumatic frame for more than ten years. Our TO range is especially suited to lodging, construction sites, technical premises, storage, garage, etc. The features of our shelters are: No metal parts for assembly and disassembly. Small volume when folded. High coverage capacity. Modularity. Techniflex is tough!!! Simple to use, the TO2 tent inflates in minutes, using the high pressure pneumatic system. Ideal for autonomous competitors, it can be easily folded when inflated. It does not need extra air at any times. VERY SOLID RESISTANT TO BAD WEATHER (WINDS OVER 130 KM/H) 5 YEAR GUARANTEE DIMENSIONS Length: 6m Width: 4m Height: 2.5m OPTIONS: Lighting, heating, air-conditioning, hot/cold insulation, etc.
Request for a quoteResults for
Pneumatic system - Import exportNumber of results
30 ProductsCountries
Company type