Pedestals - Import export

The head of decking pedestal is an accessory allowing to transform a slab pedestal into a pedestal for wood joists. Adaptable to all adjustable pedestals for paving, it is simply placed over the existing head without fixing. Once the head is superimposed on the slab pedestal to obtain a joist pedestal, the latter benefits the same properties as the other markers of the brand. It resists load up to 1 ton, withstands temperature variations from 40°C to + 60°C, UV rays, frost as well as acidic and chemical products. Made in France, the RINNO PLOTS head of decking pedestal is designed from polypropylene, a recycled and recyclable material. This product is respectful of the environment. The RINNO PLOTS brand "head of decking pedestal" accessory is compliant with the standards in force DTU 43.1 and 51.4.

The lateral riser support is an accessory for a terrace pedestal allowing to laterally close a terrace on plot. The covering support fits onto the base of the pedestal in order to carry out the vertical installation cladding for the pedestal of your raised terrace. This accessory is used in addition to the slab plate to be placed on the head of the pedestal to maintain the coating used for closing the structure. The lateral riser support is compatible with the following pedestals 60/90 mm slab pedestal, 90/150 mm slab pedestal, 150/260 mm slab pedestal. Resistance The covering support is resistant to temperature variations from 40°C to + 60°C, UV, frost as well as acids and chemicals. Manufacturing Made in France, the RINNO PLOTS terrace pedestal lateral riser support is designed and made from polypropylene, a recycled and recyclable material. This product is respectful of the environment.

The extension adds 110 mm to the height of the terrace pedestal. This accessory is only compatible with decking and paving pedestal 150 to 260 mm high. It is possible to add up to 4 extensions on a pedestal to reach a maximum height of 70 cm. The pedestal extension is ideal for constructions with a large range of height to catch up. Resistance Once the extension is placed on the pedestal, it benefits from the same properties as the other pedestals and accessories of the mark. It withstands loads up to 1 ton, withstands variations in temperature from 40°C to + 60°C, UV rays, frost as well as acid and chemical products. Manufacturing Made in France, the RINNO PLOTS terrace pedestal extension is designed from polypropylene, a recycled and recyclable material. This product is respectful of the environment. Conformity The RINNO PLOTS brand “extension 110 mm” complies with the standards DTU 43.1 and 51.4.

The extension adds 60 mm to the height of the terrace pedestal. This accessory is only compatible with decking and paving pedestal 150 to 260 mm high. It is possible to add up to 4 extensions on a pedestal to reach a maximum height of 70 cm. The pedestal extension is ideal for constructions with a large range of height to catch up. Once the extension is placed on the pedestal, it benefits from the same properties as the other pedestals and accessories of the mark. It withstands loads up to 1 ton, withstands variations in temperature from 40°C to + 60°C, UV rays, frost as well as acid and chemical products. Made in France, the RINNO PLOTS terrace pedestal extension is designed from polypropylene, a recycled and recyclable material. This product is respectful of the environment. The RINNO PLOTS brand “extension 60 mm” complies with the standards DTU 43.1 and 51.4.

The vibration buffer for pedestal is an accessory allowing the reduction of vibrations and resonances that may be emitted when traveling on the surface of a paved terrace. The shock absorber wedge offers optimal sound insulation of the terrace on pedestal. Manufacturing Made in France, the RINNO PLOTS vibration buffer is made from recycled rubber. Conformity RINNO PLOTS brand "vibration buffer" accessory complies with standards in force DTU 43.1 and 51.4. The vibration buffer is placed directly on the head of the slab pedestal without fixing. Its shape is provided with 4 cutouts to allow the lugs of the slab pedestal to protrude. The shock absorber wedge is 3 mm thick and can also be used to compensate for small differences in height between the pedestals.

The slab plate allows the slabs to be placed against a wall and to close the terrace laterally. This accessory is placed directly on the head of the pedestal and is fixed thanks to a system of clips without additional tools. The slab plate is only compatible with high pedestals 40/60 mm and more. In order to hide the pedestals at the edge of the terrace, add the riser lateral support at the base of the pedestal in order to fix the covering and hide the structure. Resistance Once the slab plate is installed on the pedestal, it benefits from the same properties as others. It withstands loads up to 1 ton, withstands temperature variations of 40°C to + 60°C, UV rays, frost as well as acids and chemicals. Manufacturing Made in France, the RINNO slab plate is designed from polypropylene, a recycled and recyclable material. This product is respectful of the environment. Conformity The slab plate for pedestals of the brand RINNO complies with the current standards DTU 43.1 and 51.4.

The selfleveling disc is an accessory that clips to the base of a decking pedestal or of a paving pedestal to install a terrace on land with gaps of levels. The disc allows you to compensate or create up to 5% slope over 1 meter. Using the selfleveling disc for terrace on pedestals is ideal for laying a wooden or slab deck on uneven ground, the disc makes it possible to obtain a level surface very easily and without making big works. The selfleveling disc is compatible with all the brand’s adjustable pedestals RINNO. It adds 25 mm to the final height of the terrace pedestal. Resistance The selfleveling disc for terrace on pedestal is resistant to temperature variations of 40°C to + 60°C, UV, frost as well as acid and chemical solutions. Manufacturing Made in France, the RINNO PLOTS selfleveling disc is respectful of the environment. It is made from polypropylene, a recycled and recyclable material.

The adjustable slab pedestal is a support for making the foundations of a terrace raised. It is placed directly on a soft and stable ground without requiring fixing. The slab pedestal can be adjusted to the nearest 150 to 260 millimeter using the red screw. The head of the paving pedestal has 4 lugs which ensure that the slabs are held in place. Their place defines a regular spacing between each of them. The slab pedestal can accommodate a slabshaped coating whether it is tiling, ceramic or gratings. Use only a coating measuring 2 cm thick at least. To define the number of pedestals required, 4 pedestals are needed for 1 slab. Thus, the pedestals are position cladding tiles for terrace at each angle. If you use tiles of large dimensions, it is possible to place an additional stud in the center of it by cutting the dewclaws on the head.

Discover the most efficient solution for any slab terrace installation. The UNIKA pedestal is height-adjustable from 40 to 60 mm. It can be raised to a height of up to 1 meter using the extension accessory. The height can be easily adjusted to the nearest millimeter using the adjustment ring: from the top by using the YEED Tightening key, or manually from the side. The UNIKA pedestal is an all-in-one revolution. the noise buffer accessory is integrated directly onto the pedestal head, and the red clamping ring makes the head self-levelling or fixed.

The slab pedestal is a support designed for the realization of the foundations of a terrace in slabs. Adjustable in height from 90 to 150 mm, it allows the installation of raised terraces. The size of the pedestal is adjusted to the millimeter using the red screw. The head of pedestal for slab is composed of 4 pins allowing the correct placement of the slabs as well as their maintenance. The slab pedestal allows the installation of a coating of the slab, tiling or grating type. Note it is imperative to use a coating with a minimum thickness of 2 cm or more. The installation of the slab terrace on pedestals is carried out on a loose and stable ground in order to guarantee the solidity of the structure. A slab requires 4 pedestals, i.e. 1 at each corner, with possibility of adding one in the center by removing the lugs with the pliers.

Discover the most efficient solution for any slab terrace installation. The UNIKA pedestal is height-adjustable from 30 to 40 mm. It can be raised to a height of up to 1 meter using the extension accessory. The height can be easily adjusted to the nearest millimeter using the adjustment ring: from the top by using the YEED Tightening key, or manually from the side. The UNIKA pedestal is an all-in-one revolution. the noise buffer accessory is integrated directly onto the pedestal head, and the red clamping ring makes the head self-levelling or fixed.

Discover the most efficient solution for any slab terrace installation. The UNIKA pedestal is height-adjustable from 40 to 60 mm. It can be raised to a height of up to 1 meter using the extension accessory. The height can be easily adjusted to the nearest millimeter using the adjustment ring: from the top by using the YEED Tightening key, or manually from the side. The UNIKA pedestal is an all-in-one revolution: it has 2 lugs that adapt perfectly to any size of joist (up to 74 mm) in wood, aluminum or composite. In addition, thanks to the red clamping screw, the head becomes self-leveling or remains fixed.

Découvrez la solution qui vous facilitera toute installation de terrasse bois ou composite. Le plot UNIKA pour lambourde est réglable de 30 à 40 mm, au millimètre près et facilement grâce à la bague de réglage : par le dessus avec la clé de serrage ou bien manuellement sur le côté. Il dispose de 2 languettes qui s’adaptent parfaitement à toute taille de lambourde bois, composite ou aluminium. Le plot UNIKA est une révolution du tout-en-un : Grâce à la bague de serrage rouge, la tête devient autonivelante ou reste fixe. In addition, thanks to the red clamping screw, the head becomes self-leveling or remains fixed.

Pedestal tables as limited edition collectors’ items.. Sandblasted glass slabs supported by a conical shaft, a tulip shaped stand or an elegant glass cylinder enclosed by three bronze wings. These pedestal tables were chosen by numerous museums in the world and in particular by the Castle of Gourdon. Different finishes available Does not work with halogens

Pedestal tables as limited edition collectors’ items.. Sandblasted glass slabs supported by a conical shaft, a tulip shaped stand or an elegant glass cylinder enclosed by three bronze wings. These pedestal tables were chosen by numerous museums in the world and in particular by the Castle of Gourdon. Different finishes available Does not work with halogens

Pedestal tables as limited edition collectors’ items.. Sandblasted glass slabs supported by a conical shaft, a tulip shaped stand or an elegant glass cylinder enclosed by three bronze wings. These pedestal tables were chosen by numerous museums in the world and in particular by the Castle of Gourdon. Different finishes available Does not work with halogens

Jean Perzel made light sublime by giving priority to its functional nature but with amazing creativity. This model is designed as a console or a pedestal table and provides a warm and glittering atmosphere to your decor. Different finishes available Does not work with halogens

Housing, stainless steel 1.4301. Bearing, stainless steel 1.4125. Seal, rubber NBR. Note Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.

Adjusting bearing for misalignment equalisation All-purpose as flange (EXALIGN DF and FL) or pedestal bearing (EXALIGN PB), suitable for high loads Self-aligning spheric avoids edge load to the bearing Adjustable up to ± 5° Spheric is secured against distortion Depending on choice of housing, spherics and bearings, simple to most demanding bearing solutions are possible For optimum design solutions, various bearings from the GGB product programme are applicable