Partition walls - Import export

COMPOSITION AND APPEARANCE Powder coating made from plaster, calcium carbonate and various additives. The paste obtained is green in colour. TECHNICAL CHARACTERISTICS • Setting time: around 2 hours • Fine grain • Water uptake after immersion : < 2 % • Jointing tape adherence : > 1000 g • Cobb test : < 160 g/m² • PV water permeability : CEBTP N° BEB6-9-3078/2 PREPARATION OF SURFACES Water-repellent plaster blocks and plasterboard must be dry and free from dust. APPLICATION Application on plaster blocks : • The laying of the first row is carried out by gluing the edge and bottom of the mortises coming up from the floor, as well as along the vertical part. • The joints between blocks should not exceed 3 mm in thickness. the second row should be completed in the same manner, with staggered joints, before the adhesive has begun to set. This is important in order to ensure the partition wall is properly aligned. • Allow to dry before starting the third row. Smooth the joints.

La Rochère glass brick can be used both indoors and outdoors. It can be used to create a separation (wall, partition) or a decorative element while maintaining maximum light and privacy.

La Rochère glass brick can be used both indoors and outdoors. It can be used to create a separation (wall, partition) or a decorative element while maintaining maximum light and privacy.

La Rochère glass brick can be used both indoors and outdoors. It can be used to create a separation (wall, partition) or a decorative element while maintaining maximum light and privacy.

La Rochère glass brick can be used both indoors and outdoors. It can be used to create a separation (wall, partition) or a decorative element while maintaining maximum light and privacy.

The glass block is a real ingot cast by hand, weighing almost 4 kg. This block lends itself to the most diverse uses in interiors, allowing the creation of partitions, shower cubicles, low walls, ....

The glass block is a real hand-cast ingot, weighing almost 4 kg. This block lends itself to the most diverse uses in interiors, making it possible to create partitions, shower cubicles, low walls, ....

The glass brick, whose graphic aspect is a round inserted in the glass square, can be used inside and outside. It is used to create a decorative or separating element (wall, partition) while preserving a maximum of light and transparency. Based on soda-lime glass, it is manufactured in two half-shells that are assembled by hot welding using a mechanical press. Pressed at more than 800°C, these bricks contain rarefied air, which gives them strength and insulation.