Safety masks - Import export

The HDPE coating offers a top protection against high concentration chemicals, as well as against biologics risks Covered taped seams allow maximum impermeability face to splashing under pressure and sprays Elasticated thumb loop ensures a constant junction with the protective glove. The other end of the sleeve is elasticated Antistatic treatment on both sides to facilitate the dissipation of electrostatic charges Ideal protection against oil products, different acids such as nitric or sulfuric acid, fine powders, and waste water FABRICS ET SEAMS Hdpe and taped seams

The HDPE coating offers a top protection against high concentration chemicals, as well as against biologics risks Covered taped seams allow maximum impermeability face to splashing under pressure and sprays Clamping elastic at knee level and linkage at calf level 50 cm Overboot height to cover up to the knee for a better protection of the most exposed parts Antistatic material on both faces to aid in the dissipation of an electrostatic Ideal protection against oil products, different acids such as nitric or sulfuric acid, fine powders, and waste water FABRIC ET SEAM HDPE and taped seam

Type 5 PB EN ISO 139821 Protection against hazardous dry particulates Type 6 PB EN ISO 13034 Protection against light spray of liquids EN ISO 10732 Protection against radioactive particulates contamination EN ISO 14126 Protection against infectious agents EN ISO 11495 Antistatic garment requirements FEATURES Microporous film sleeve elasticated at both ends. Tunnelled elastics with bound seams. Antistatic fabrics material.

Lintfree material which avoids any contamination in a critical controlled environment Covered bound seams to strengthen protection and to reduce risks of liquid and particulates penetration Thick sole in PVC with a antislipsole power on dry or wet grounds Clamping elastic at knee level and linkage at calf level 50 cm Overboot height to cover up to the knee for a better protection of the most exposed parts Antistatic material on both faces to aid in the dissipation of an electrostatic charge (only on Microporous film) Ideal protection against Light chemical splashes, powder, glues, fiberglass, solvents, paints FABRIC ET SEAM Microporous film et bound seam

Lintfree material which avoids any contamination in a critical controlled environment Covered bound seams to strengthen protection and to reduce risks of liquid and particulates penetration Thick sole in PVC with a a antislipsole power on dry or wet grounds Clamping elastic at ankle level and at the heel to maintain the overshoe stable and straight Antistatic material on both faces to aid in the dissipation of an electrostatic charge (only on Microporous film) Ideal protection against Light chemical splashes, powder, glues, fiberglass, solvents, paints FABRIC ET SEAM Microporous film et bound seams

LIMITS THE RISK OF CONTAMINATION IN CONTROLLED AREAS WeePro lab coat is manufactured from a very few lintfree premium fabric. All the seams have been taped to avoid delamination of the threads. A double layer on collar and hem at the bottom of the labcoat prevents the appearance of filaments. Each labcoat is individually packed in a vacuum bag totally free from dirt PROTECTS AGAINST PARTICLES / LIQUID PROJECTIONS / SPRAYS he WeePro Labcoat protects from unconcentrated light chemical product splashes. Bound seams stop the finest particles and aerosol sprays PROVIDES OPTIMUM COMFORT WeePro material is light and breathable. Jersey cuffs replace formal elastic to enhance the comfort PACKED IN INDIVIDUAL VACUUM POLYBAG to avoid any external contamination Antistatic material on both faces to aid in the dissipation of an electrostatic charge Ideal protection against powders, glues, resins, solvents, paints, chemicals FABRIC ET SEAM Microporous film et bound seam

Cleanroom apparel compatible from Iso class 4. Coverall meets Category 3 Type 5/6. Bound seams and tunneled elastics. Elasticated thumb loop. Threepanel hood. Adhesive protective flap. Double packaging fully sealed. BONUS ADDON Breathable fabrics and ergonomic style pattern help to reduce the risk of heat stress. New material MICROMIUM®, light and very low contaminant In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method. This new cleanroom clothing meets all of the latter requirements of ESP RP CC003.4, namely

Cleanroom apparel compatible from Iso class 4. Coverall meets Category 3 Type 5/6. Integrated overboot with elasticated wrap at ankle – Antislip sole Bound seams and tunneled elastics. Elasticated thumb loop. Threepanel hood. Adhesive protective flap. Double packaging fully sealed. BONUS ADDON New material MICROMIUM®, light and very low contaminant In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method.

Cleanroom apparel compatible from Iso class 4. Apparel sterilized by gamma irradiation Coverall meets Category 3 Type 5/6. Bound seams and tunneled elastics. Elasticated thumb loop. Threepanel hood. Adhesive protective flap. Double packaging fully sealed. BONUS ADDON New material MICROMIUM®, light and very low contaminant In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method. This new cleanroom clothing meets all of the latter requirements of ESP RP CC003.4, namely Properties of the materials used in the design

Cleanroom apparel compatible from Iso class 4. Apparel sterilized by gamma irradiation Coverall meets Category 3 Type 5/6. Integrated overboot with elasticated wrap at ankle Antislip sole. Bound seams and tunneled elastics. Elasticated thumb loop. Threepanel hood. Adhesive protective flap. Double packaging fully sealed. BONUS ADDON New material MICROMIUM®, light and very low contaminant In a cleanroom environment, the operator is the main vector of contamination. The clothing worn plays an essential role in minimizing the risk of contamination. The MICROMIUM® material used for the design of the WEEPRO LABO® suit minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method. This new cleanroom clothing meets all of the latter requirements of ESP RP CC003.4, namely

Sterile accessories dedicated to the cleanroom environment. Apparel sterilized by gamma irradiation. Cleanroom apparel compatible from Iso class 4. Bound seams and tunneled elastics. Elastic cuffs and thumb loops. Long length 50cm. BONUS ADDON Folded sleeve to gowning easier, and to prevent the contact with the outside surface. Sealed packaging by pair with an Easy Tear system The MICROMIUM® material used for the design of the sleeve minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method. Each pair of sleeves is packaged by an individual bag, and 2 overpacks in the carton.

Sterile accessories dedicated to the cleanroom environment. Apparel sterilized by gamma irradiation. Cleanroom apparel compatible from Iso class 4. PVC Slip resistant soles. Bound seams and tunneled elastics. Holding string at ankle. Height 50cm BONUS ADDON Folded sleeve to gowning easier, and to prevent the contact with the outside surface. Sealed packaging by pair with an Easy Tear system The MICROMIUM® material used for the design of the sleeve minimizes the shedding of par­ticles quite dramatically. The results obtained on the performance of the particle deposit fall well below category 1 (the most selective category). These tests were carried out on the basis of the HELMKE drum test method. Each pair of sleeves is packaged by an individual bag, and 2 overpacks in the carton.

Weejet coverall type 3 provides a suitable protection against abroad range of chemical hazardous protection. Effective protection against range of commonly used chemicals combined with taped seams, double zip & storm flap. In addition, WeeJet garment feature a finger loop and knitted cuff to enhance comfort, durability and safety. BONUS ADDON Garment combines resistance pressured jet and freedomofmovement thanks to its special design double zip/storm flap and knitted cuff/thumb loop.

Disposable protective coverall with overboots attached to ensure a full protection. WeeCover Max 1 Integral offers the highest level of comfort with protection because of the high level of air permeability. Breathable fabrics and ergonomic style pattern help to reduce the risk of heat stress. BONUS ADDON Overboots system attached to the suit with elastics. The overboots pattern ensure a fully protection in critical areas.

The special taped seams increased strength and provide an effective barrier to particles. Disposable protective coverall WeeCover Max 1 Blue provides a high level of lightweight and comfort. Breathable fabrics and ergonomic style pattern help to reduce the risk of heat stress. BONUS ADDON Overboots system attached to the suit with elastics. The overboots pattern ensure a fully protection in critical areas.

Special asbestos disposable protective coverall offers an increased strength and an effective barrier to particles. WeeCover Max 1 offers the highest level of comfort and protection because of the high level of air permeability. Breathable fabrics and ergonomic style pattern help to reduce the risk of heat stress during the asbestos removal process. BONNUS ADDON Special asbestos packaging for tracking.

Disposable protective coverall WeeCover Blue provides a high level of comfort (high water vapor and air permeability). This lightweight garment protects against dusts and light splashes. This is the Perfect choice for dry application, general manufacturing and maintenance. Elasticated hood, waist, cuffs and ankles. BONUS ADDON Breathable fabrics and ergonomic style pattern help to reduce the risk of heat stress. Blue color obscures the excessive dirt.

Disposable protective coverall WeeBack has been designed to work in warmer climate to help reduce the risk of heat stress. The critical protective parts of the garment offer a high level of liquid and dust protection. The back panel SMS fabrics is air and water vapor permeable. The special bound seams increased strength and an effective barrier to sprays. The ergonomic style pattern allows much greater freedom of movement. Elasticated hood, waist, cuffs and ankles. 2 pieces diamond crotch gusset. BONUS ADDON Bound seams and crotch gusset improve wearer movement, comfort and enhancing coverall durability.

The special taped seams increased strength and ensure an effective barrier to pesticide spraying, and solid or liquid hazardous substances and biological agents. The product is also well designed to allow a high degree of movement with the garment. Selfadhesive zip flap and chinflap for increased protection. BONUS ADDON Hood and chinflap designed for optimum fit with respirators, particularly full face mask.

Pharmaceutical industry Nuclear decommissioning Asbestos treatment Laboratories – Clean room Soil remediation and dismantling Disposal of hazardous materials Handling biological agent Industrial cleaning and maintenance work ElectronicsThe special taped seams increased strength and an effective barrier to pesticide spraying, and solid or liquid hazardous substances and biological agents. Taped seams to help also reduce contamination to the external environment. The lintfree fabrics reduce the risk of contamination in critical areas. No fibres shedding. BONUS ADDON Overboots system attached to the suit with elastics. The overboots pattern ensure a fully protection in critical areas and secure movements.

Paint spraying Pharmaceutical and cosmetic industry Nuclear industry Epidemic and virus Asbestos removal and abatement Phytosanitary treatment Fog of Paint spraying Chemical Industry. Handling toxic powders Low level insecticide and pesticide spraying Handling biological agentThe special taped seams increased strength and ensure an effective barrier to pesticide spraying, solid or liquid hazardous substances or biological agents. The lintfree fabrics reduce the risk of contamination in critical areas. No fibres shedding. BONUS ADDON This coverall protective clothing got the best results from its category for the biologic risks (EN14126).

Disposable protective coverall WeePro with collar offers superior liquid and dust protection to traditional flashspun along with good comfort and durability. WeePro Col fabrics material allows the moisture vapor to escape through the coverall. The ergonomic style pattern allows much greater freedom of movement. Elasticated waist, cuffs and ankles. BONUS ADDON Collar model allows the body moisture vapor to escape naturally. This model is perfect to substitute traditional workwear for dry application.

General manufacturing and maintenance Wood and plastic processing Construction Fiberglass, resin and ceramic applications Light Industrial Cleaning PROTECTION STANDARDS Type 5 EN ISO 139821 Protection against hazardous dry particulates Type 6 EN ISO 13034 Protection against light spray of liquids EN ISO 10732 Protection against radioactive particulates contamination EN ISO 14126 Protection against infectious agents EN ISO 11495 Antistatic garment requirements SIZES M à XXXL FEATURES AND BENEFITS Disposable protective coverall WeePro provides superior protection to dust and liquid jets along. Coverall offers the perfect comfort and durability expected. WeePro fabrics material allows the moisture vapor to escape through the coverall. The ergonomic style pattern allows much greater freedom of movement. Elasticated hood, waist, cuffs and ankles.