Adhesive - Import export

COMPOSITION AND APPEARANCE Powder filler based on plaster, calcium carbonate and various additives. The resulting paste is white. SUPPORT AGREED All types of interior substrates. COATINGS DTU 59.1. MATERIALS AVAILABLE DTU 59.1 TECHNICAL CHARACTERISTICS • Setting time : 2 hours • Particle size : fine SUITABLE SURFACES The substrates must be in conformity with DTU 59.1, i.e., clean, hard, free of dust and any trace of release agent. Scrape down, sand and wash old paint. USE CAUTION The temperature during application and drying must be between 5 and 30°C. Do not apply to a damp substrate. Do not use mix that has begun to harden. RATE TEMPERING Around 10 to 12 l of water per 25 kg sack. Mixing is preferably to be carried out mechanically. APPLICATION Application is to be carried out using a float, a knife or a putty knife for smoothing. For a decorative finish, use a roller, brush or sponge.

COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Concrete, chipboards, cement coating, aerated concrete. REFERENCE DOCUMENTS DTU 25.41 and 25.42. Standard NF EN 14496. CE mark. TECHNICAL CHARACTERISTICS • Setting time: 2 hours. • Reaction to fire A1. PACK SIZE 25 kg bag on shrink-wrapped pallet. 5 kg bag. PREPARATION OF SURFACES The wall surface must be sound, free from dust and oil, and show no signs of damp. In summer if the supports are too dry, they may be slightly moistened. QUANTITY OF MIXING WATER 12.5 litres of water per 25 kg bag. APPLICATION Generally applied in “dabs” approx. 10 cm in diameter, with 30 cm horizontal spacing and 40 cm vertical spacing on the plasterboard or insulation.