Cement stones - Import export

TECHNICAL DEFINITION • White fine grain repair filler for interior and exterior use • Does not shrink • High resin content • FINEX SYSTEM is a multi-purpose filler, which allows to fill holes and cracks, and to repair windowsills and damaged angles ACCEPTED SUBSTRATES Cement, concrete, bricks, concrete blocks, stone, aerated concrete, plaster, old paint, old tiling. SUITABLE SURFACES Once completely dry, FINEX SYSTEM can be covered with all types of paint, watertightness system, plaster- or cement-based fillers, and silicate, epoxy or polyurethane paint. TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard DTU 42.1 • pH : 9 once dry • Setting starts after 50 minutes • Setting ends in 1 hr 10 min PREPARATION OF SURFACES BEFORE APPLICATION The substrate must be clean, dry, free of dust and of any trace of stripping oil. Walls that are peeling off must be scraped beforehand. Strip any old paint in poor condition and remove any old thick plastic covering.

TECHNICAL DEFINITION Cement-based powder filler with fibres for treating damaged exterior substrates. The filler is multi-purpose: can be used to fill, repair and rectify wall surfaces, with a smooth finish. SUITABLE SUBSTRATES All types of substrates : cement, concrete, concrete blocks, stones, brick, old paintwork, old tiling. COVERINGS Once the filler is completely dry, can be covered with all types of coatings and paintwork. Do not directly cover with solvent-borne paint. TECHNICAL FEATURES • Setting time: 30 to 40 minutes • Adhesion: complies with EN 16566 • AFNOR NFT 36.005 classification: Family IV class 4c MIXING PROPORTIONS • 6 to 6.5 litres of water per 15 kg bag • 2 to 2.2 litres of water per 5 kg bag • 0.4 - 0.43l of water for 1 kg • 2 volumes of water for 5 volumes of powder APPLICATION Application with a plastering spatula, knife, smoothing trowel. Clean tools with water. COVERAGE Approximately 1 kg per m²/mm of thickness.

COMPOSITION AND APPEARANCE Powder coating made of cement, sand, water, calcium carbonate, resin and various additives. The resulting paste is white. SUITABLE SURFACES All types of rough surfaces constructed from dry and wet masonry: cement, concrete, cinder blocks, stone, brick PACKAGING Bags of 6 and 20 kg. APPLICATION Apply using a plastering trowel : 1 or 2 coats to smooth over any bumps. Apply in 2 cross-coats using a wide brush (use a more liquid consistency). Clean tools with water. APPLICATION THICKNESS Max 5 mm. CONSUMPTION Approximately 1.1 kg per m²/mm of thickness. TECHNICAL FEATURES • Setting time : 3 hrs • Adhesion : compliant with standard EN 16566 • AFNOR classification NFT 36.005 - Family IV class 4c • High vapour permeability : class V1 according to ISO 7783-2 • Low liquid permeability : class W3 according to ISO 1062-3 RECOMMENDED APPLICATION When applying with a wide brush, mix to a more liquid consistency (like whitewash).