Tools - Import export

Product Design for Manufacture Our team is able to support you to design your product for manufacture if required. This is a very technical area where attention to detail is vital. Expert advice is required to produce a design which is suitable for product manufacture. 3D CAD modeling and analysis, product visualisation through to prototyping. Design for Manufacture 3D Modeling Prototyping Mould Tooling We are able to offer you whatever grade of tooling you would like for your product, with the service to match. We deal with tooling companies both in Europe & Asia. We are in full control of the tooling process to ensure that you receive the very best quality for the budget you are working to. Plastic Injection Moulding Manufacture Once the tooling has been manufactured and tested, it is then time to produce your component or item. Using a variety of machines, we are able to produce batches with manufacturing capacity from 200 to 1000 tons.

Thermoform tooling for ULMA®, MULTIVAC®, MECAPACK®, CFS® TIROMAT®

Tapped cylindrical pins are chiefly used in blind holes. The milled flat prevents air compression in blind holes. The tapping makes it possible to use the extractor 03328.

Design and manufacture of fishing tools such as : - DTU : Drilling Type Undereamer - RTU : Rock Type Undereamer - Pipe cutter - Section mill

Lifting and handling equipments Design and manufacture. All-inclusive delivery with control reviw

Design and manufacture of milling tools such as : - SJM : Super Junk Mill - Junk Mill - Pilote Mill - WOS : WashOver Shoe

SKID PRESSURIZATION FOR PLANES INFLATING BENCHES - Stainless skid including the whole instrumentation necessary for piloting - Air filter - Automaton and supervision piloting - Various pressures acquisition - Pressure control at 1,2 mbar/s TOOLING PDOS : POWER DOOR OPENING SYSTEM : This tooling permit: - PDOS electrical supply in 115Vac/400 Hz and in 28Vdc le PDOS, - The jack purge of the driving hoods, - Driving hoods opening and closure (Fan and reverses), - Secure the staff during the operation. HEATED BOX FOR COMPOSITE MATERIAL : - 6 m length welded structure, - Heated box 5,5 m length x 1,5m width, - Heated box flatness 5/10 mm/m, - Vacuous putting system 600mbar, - Temperature setting nd cooling by heat transfer fluid, - Heating capacity of 150kW, - Automaton and supervision piloting

Our EasyGel Protect® coring solutions guarantee you a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). SPECIFICATIONS • Transparent core tube with decontaminable accessories and its equipment. BENEFITS • Cheap Solution • Easy to use • Reproducible operating mode • Clean Site • Protection of operators and their environment

Capture and retention of all dusts at the source. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). Each gel, specifically developed according to its application, allow you to reduce dusting. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel BENEFITS • Cheap Solution • Easy to use • Reproducible operating mode

USE : Extracting of Bolts and Sleeper Screws Bolts that are either broken inside of the concrete Sleepers or loose. ADVANTAGES : Simple and high-effiency : 90 Bolts removed per day by 3 Operating Agents. Note that proceeding in this way, you can achieve significant savings by avoiding the necessity to replace concrete Sleepers. - T-shaped body with tightening handle for holding collet. - Holding collet in treated steel with jaws - 1 Balance Lever to extract broken bolts. - Net Weights : Wrench = 14 Kg / Lever = 9 Kg - For Ø 18 mm Bolt - Ref. CE 18 - For Ø 22 mm Bolt - Ref. CE 22 - Total Height = 1.10 m - Length of the Arm = 0.80 m. - Length of the Crank Handle = 0.27 m. OPTIONS : SPARE PARTS = Holding Collet for Ø 18 mm Bolt - Ref. P.I.18 Holding Collet for Ø 22 mm Bolt - Ref. P.I.22 BORING BIT Ø 23 x 30 mm - Length 140 mm (Graffenstaden Shank) - Ref. TR.23 (Cleaning of the Bolt Hole )

UTILISATION : Permettent de monter le matériel et outillages sur les talus jusqu'à la voie. AVANTAGES : Matériel léger, raccordable en grandes longueurs. Ces escaliers souples en caoutchouc sont utilisés en vue de permettre de monter le matériel et les outillages le long des banquettes et des talus jusqu'à la voie. Longueur de chaque élément : 1,60 m x 0,40 m Poids unitaire : 9 Kg Raccordement des éléments : Entre eux par une clé de raccordement intégrée A la voie, par des crochets au patin du rail reliés à des chaînes acier. Références : Elément avec clé de raccordemnt (1,6 x 0,4 m) - Réf. EMT Elément raccordable à la voie avec crochet + chaîne - Réf. EMT-V

USE : Checking of the Sleepers Position when laying or replacing Sleepers. ADVANTAGES : Simple and Tough. Fixed Metallic Square Track Gauge (m) Dimensions (cm) Weight (Kg) Reference 1.44 162 x 115 7.3 390 1 120 x 100 5 390-M 1.52 170 x 115 7.5 390-R 1.676 190 x 115 8.7 390-G Folding Metallic Square - Ref. PL - Transporting Case - Ref. ET1 Reinforced Wooden Square (French Norm : N.F.F. 76019) Track Gauge (m) Dimensions (cm) Weight (Kg) Reference 1.44 162 x 112 3.1 391 1 120 x 100 2.7 391-M 1.52 170 x 112 3.3 391-R 1.676 190 x 115 3.6 391-G Folding Plastic Square - Ref. PVC For Track Gauge 1.44 m = 164 x 115 cm, Folded Position = 162 x 110 cm. Transporting Case Ref. ET2 = Ø 16 cm - Length 170 cm OPTIONS : - Electrically Insulated Metalli c Square (For Track Gauge : 1.44 m) - Ref. 390-1 - Alumium Metallic Square (Weight 4 Kg) - Ref. 390-A

- Length 88 mm - Delivered in Boxes of 12 pcs. - Unit Weight = 11 gr. - Weight of 1 Box = 0.15 Kg Available Colours : Colour Reference Yellow 306-A Red 306-B White 306-C USE: Marking on Tracks (The Marks are unerasable on steel, wood and concrete).

USE : Tightening and loosening of Bolts on Fishplates and Switches and Crossings. AVANTAGES : Simple and Tough. The Short Wrench (model 15) can be used to centre the fishplates using the pointed Conical Tip. Pipe Wrench - Length 80 cm - Weight 5 Kg For 35 mm flat nuts - Ref. CP 35 For 38 mm flat nuts - Ref. CP 38 For 40 mm flat nuts - Ref. CP 40 Polygonal Ratchet Wrench smaller size Thickness = 22 mm - Length 675 mm - Weight 3.9 Kg For 35 mm flat nuts - Ref. CER 35 For 38 mm flat nuts - Ref. CER 38 For 40 mm flat nuts - Ref. CER 40 For 42 mm flat nuts - Ref. CER 42 FORGED FLAT WRENCHES - with Hardened Forks - Paint black varnish Short Wrench with pointed Conical Tip Length 30 cm - Weight = 1.6 Kg For 32 mm flat nuts - Ref. 15-D For 35 mm flat nuts - Ref. 15-A For 36 mm flat nuts - Ref. 15-E For 38 mm flat nuts - Ref. 15-B For 40 mm flat nuts - Ref. 15-C Long Single-Ended Wrench - Length 70 cm - Weight = 3 Kg For 32 mm flat nuts - Ref. 155-C For 35 mm flat nuts - Ref. 155-D For 36

USE : Tightening and Loosening of Coachscrews and Bolts. ADVANTAGES : Simple and Tough. - Carbon steel Body - Hardened pointed End - Height 800 mm - Length = 700 mm - Paint black varnish Hand T-Square Coachscrews Wrench Ø (mm) Reference 18 50-C 20 50-B 23 50 27 50-D Hand T- Rectangular Coachscrews Wrench Ø (mm) Reference 18 x 24 50-E 20 x 27 50-F Hand Flat Hex Nuts Wrench Ø (mm) Reference 32 51-E 35 51-B 36 51-J 38 51 39 51-F 40 51-C 41 51-H 42 51-D 43 51-G OPTIONS : Hand T-Wrench with Long Socket to tighten the Bolts of Long Sleepers on metallic Bridges (Threaded Rod protruding by more than 100 mm) Ø (mm) Flat Hex Nuts Reference 32 52 38 52-C 45 52-B ADAPTABLE Hand T-Wrench, with a square drive 23 mm - Ref. 53

USE : Adzing of Wooden Sleepers - Adjusting of Adzed Switches and Crossings. ADVANTAGES : Tough and Chisel and can be re-sharpened. - Hardened Steel Body - Hex Body - Cutting Width 45 mm - Length = 300 mm - Paint black varnish - Weight = 1.1 Kg - Reference : 1039

USE : Bending of the rails on Tracks ("Vignole" Rails) and Grooved Rails (See the OPTIONS) ADVANTAGES : Pratical and Tough - Control Level Requires without effort. "Vignole" Rail Bending until 60 Kg/m. - Ref. 35-T - Bending Capacity 35 Tons - Mechanically soldered Body - Shapes suitable for each type of rail - Integrated Pump and Oil Tank - Activated Operating Lever, Length 1 m - Automatic Rapid Return Central Piston - 4 Handles - Paint yellow varnish - Stroke : 80 mm - Dimensions : 68 x 67 x 25 cm - Net Weight : 125 Kg OPTIONS : Grooved Rail Bending (Tramways Rails), until 75 Kg/m. - Ref. 60-T - Bending Capacity 60 Tons - Stroke = 100 mm - Shapes suitable for each type of rail - Dimensions : 93 x 84 x 29 cm - Weight = 220 Kg

USE : Removing Chairs. (1 Track on DR Rail - Double Rail-Head) ADVANTAGES : Simple and Tough - Body in forged steel (Bare) -Tool Width 24 mm - Oval Eye = 40 x 22 mm - Dimensions of Body = 54 x 22 mm - Length = 310 mm - Paint black varnish - Weight = 3.4 Kg - Reference : 2-B OPTIONS : - Chair-Driver mounted with Wooden Handle (Weight 4.2 Kg) - Ref. 2 - Handle = Length 0.9 m (Ash) - Ref. 128

USE : Ballast Works by 2 Operating Agents, Bench Repair Works, etc. ADVANTAGES : Simple, Tough and Pratical 4 Square Prongs Ballast Plough (Standard Model) - Ref. 650 - 4 Square Prongs - 4 Curved Prongs - Plough Width 250 mm. - Chain Length 1.60 m - Handle Length 1.10 m - Paint black varnish - Net Weight = 7.5 Kg (Chain with Handle) 5 Prongs Ballast Plough - Width 330 mm - Weight 10 Kg, - Ref. 652 6 Prongs Ballast Plough - Width 420 mm - Weight 12 Kg, - Ref. 651 The Ballast Ploughs are delivered complete with Handles and Chain-Traction. Spare Parts : Square Straight Prong - Length 230 mm - Weight 0.36 Kg, - Ref. 65-D Round Curved Prong - Length 210 mm - Weight 0.28 Kg, - Ref. 65-C Wooden Handle - Length 1.10 m (Ash), - Ref. 129

USE : Oxycutting of Rail Parts, Nuts and Bolts etc... - Dismantling of Tracks. ADVANTAGES : Solid and Extremely Safe to operate. - Cutting Capacity until 300 mm - Length 420 mm. - Oxygen and acetylene Valves - Reference : CC-1 - Complete Set : CC-1 + CPB = C2PB OPTIONS : - Spare Parts = Nozzles - Ref. BU1 Tube, Length 10 m - Ref. TU1 - Cylinders Holder mounted on 2 Rubber Wheels - Ref. CPB (Supplied without Cylinders Gaz)

USE : - Fast Tightening of Fishplates on Track (or on Work-Sites) - Tightening of Stopping Shoes. ADVANTAGES : Allow the freely circulation of the Heavy Machines on Track. (Ballast Cleaning Machine, 64 N Model) "SNCF" Model Standard Clamp of Fisplates - Ref. 64 - Body in forged Steel - Tightening Screw in hardened steel with 38 mm Flat Hex Ends - Ø 22 mm Centring Pins - Tightening Screw Stroke : 100 mm - Paint yellow varnish - Net Weight : 8 Kg Small Size Clamp of Fishplate - Ref. 64R - 35 CD-4 Steel - Tightening : 160 mm - Net Weight 8.5 Kg Flat Steel C-Wrench Clamp of Fishplates - Ref. 64N with 2 x Ø 40 mm Hex Head Socket Screws and Ø 22 mm - Weight = 9 Kg ( Doesn't engage the Track Gauge) OPTIONS : Spare Parts for Clamp of Fishplates Model 64 : * Ø 22 mm Centring Pins - Ref. C-22 * Short Tightening Screw - Ref. V-33 * Long Tightening Screw - Ref. V-34 Clamp for 230 mm Tyre-Rail - Ref. C-230 Clamp for 250 mm Tyre-Rail with 2 Fast Tightening Screws - Ref. C-250

USE : To probe Pumping Sleepers that require additional occasional Tamping. ADVANTAGES : Simple, econonomical and efficient. - Steel Ball covered in rubber - External Ø : 140 mm - Length 1 m - To probe concrete Sleepers - Weight : 9.3 Kg - Reference : 304-B OPTIONS : For Wooden Sleepers : Ø 100 mm Steel Ball - Length 1 m - Ref. 304 French Norm : N.F. F 76.024 - Weight 8.5 Kg For Metallic Sleepers : Ø 90 mm Hard Oak - Weight 3 Kg - Ref. 304-M

Safety Rail-shunt Cable operating during Track Works. Section = 150 mm² Equipped with 2 Bronze Tightening-Clips. Length : 2 m - Electrically insulated. Maxi Amperage : 270 A Net Weight : 3 Kg Reference : CS-1 (This Rail-Shunt Cable is part of the " Set of Security Ref. SEC-1 )

USE : Locking Switches and Crossings. ADVANTAGES : Highly safe Equipment in forged steel (doesn't engage the Track Gauge). - Screw stroke : 100 mm - 10 Locking Positions - The Screw is made from hardened steel with a 120° pointed end. (small thread) - Pivoted Rear Shoe - Paint brown or yellow varnish - Overall Length : 40 x 20 x 10 cm - Weight : 5.7 Kg - Reference : 271 OPTIONS Trapezoïdal Threaded Screw (minimum quantity = 20 pcs.) - Ref. 271-FT

- Ø 47 mm - Length 440 mm – Weight 0.7 Kg - Magnetic Part Length 90 mm with manually operated demagnetization. - Reference : BM-1 USE : Cleaning of the insulated sticked Rail Joints Elimination of the intempestive incidents of shunts into the electric zones caused by the metallic Flakes, etc …

UTILISATION : Turning and Pulling Rails or the Switches and Crossings. - Transposing of the rail that the Worm Running Edge is transposed to the outside. - Pulling of the rail. AVANTAGES : Portable and Tough Equipment - Loading Capacity : 6 Tons - Includes 1 Base on 2 Rollers able to be rotating at 360° - 4 Transportation Handles - Overall Dimensions : 100 x 44 x 30 cm - Paint Yellow varnish - Net Weight : 84 Kg - Reference : 57-C OPTIONS : - Loading Capacity : 12 Tons - Ref. 57-C2 - Net Weight : 88 Kg