Stage - Import export

The intrinsic quality of the various components, sub-assemblies and software is checked at each stage of design and manufacturing. During the pre-validation phases, performance, durability, and efficiency goals are meticulously assessed and cross-checked with the obligations defined in the specifications. These efficiency targets are cross-referenced and verified with our customer upon commissioning of the equipment, following the implementation of a duly developed validation protocol.

Body and rotary table Al alloy, anodised. Spindle steel, casehardened. Spindle bearing maintenancefree. Position indicator plastic. Version Radial play of rotation axis < 0.015 mm. Axial play of rotation axis < 0.02 mm. Repeat accuracy < 0.05°. Spindle selflocking. Note 360° adjustment with no end stop. The position indicator displays in 0.1° increments clockwise. The angle of rotation is indicated directly on the large LCD display. The rotary stage rotates anticlockwise. Reset, chain dimension and offset settings can be made via the keypad. 2 years battery life. The battery is quick and easy to replace. The mounting position of the position indicator is set in 4 positions using one screw. Transmission ratio 211611008 = 501 211611012 = 551 211611025 = 501 The modular design enables the rotary stage to be easily combined with other items of the same size. Drawing reference Assembly position of position indicator a) top (standard) b) right c) bottom

Body and rotary table Al alloy, anodised. Spindle steel, casehardened. Spindle bearing maintenancefree. Version Radial play of rotation axis < 0.015 mm. Axial play of rotation axis < 0.02 mm. Repeat accuracy < 0.05°. Spindle selflocking. Note 360° adjustment, no end stop. Scale graduation is 10 increments. Transmission ratio 2116008 = 501 2116012 = 551 2116025 = 501 The rotary stage can be easily combined with other modules of the same size. Drawing reference All counterbores to DIN 74Bm (D6)

Bearing block and carriage aluminium alloy, anodised. Guide columns stainless steel, ground. Spindle stainless steel, rolled thread. Guide bearing maintenancefree. Version Radial play on guide < 0.02 mm. No axial backlash. Spindle selflocking, with additional lock. Note The almost playfree guides and absolutely playfree spindle allow for adjustment without the need to loosen or clamp the spindle. The scale graduation is in 5 or 10 increments; 1 increment corresponds to 0.1 mm of travel. The cross stage can be easily combined with positioning stages, vertical stages and other accessories of respective size by the modular principle.

Aluminium outer ring and inner ring. Iglidur® J plastic slide elements. Stainless steel A2 screws. Version Anodised outer ring and inner ring. Note Aluminium plain bearings with replaceable, high performance material glide elements for rotary stages. Such a combination of materials guarantees absolutely lubricant and maintenancefree running. Simple assembly. High wear resistance. For high loads, high rigidity.

Bearing block and carriage aluminium alloy. Guide column and threaded spindle stainless steel. Plain bearing for guide columns and spindle nut highquality special plastic. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Stainless steel hardened and ground. Threaded spindle with ball bearing. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Positioning stages for motorised adjustment and positioning tasks. The plain bearings and spindle nuts are suitable for dry running, however lubrication with a grease for plastic plain bearings is recommended. The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

Base and rotary table aluminium alloy. Hollow shaft stainless steel. Preloaded worm gear steel. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Rotary positioning stages for motorised adjustment and positioning tasks. The preloaded worm gear runs virtually playfree. The bearing of the worm shaft offers maximum radial rotational accuracy. Cables can be routed through the large bore in the hollow shaft. The adjustable positioning ring is used to determine the rotational reference point to the position of the assembled part. Proximity switches can be mounted with the optionally available sensor holder (21094). The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

On this line, filling is provided by the K Net Auto, an automatic machine that can fill up to 1,200 products / hour with an accuracy of +/- 0.5% of the dosed liquid. Depending on your industry and your product range, the K Net Auto will be equipped with a suitable dosing system (peristaltic, flowmeter, volumetric, etc.). Capping is carried out using the VS 400. This automatic capper is versatile and allows the capping of many cylindrical caps (caps with vertical grooves, dropper caps, pre-threaded screw caps, screw caps, hinged lids, etc. etc.). The operator manually places the cap onto the container which will then be detected and then automatically be capped (tightening torque set via the touch screen) by the capping head. Finally, the labeling is carried out by the Ninon Mix machine. This labeler is one of the most versatile in the CDA range. Square, cylindrical, oval, tapered products … Our labeler covers all of these containers with one to several labels.

The K-Line S stands out as an enclosed linear filling machine, appreciated not only for its user-friendly nature and self-cleaning capabilities but also for its remarkable versatility. Tailored to the specific characteristics of your products, we employ the appropriate dosing system—be it volumetric, flowmetric, centrifugal dosing, among others. Remarkably, the K-Line S achieves a filling capacity of up to 3,000 liters per hour while maintaining a high level of accuracy at +/- 0.5%. Complementing this, the VS1000 capper, seamlessly integrated with a linear conveyor (or curved to suit your workshop layout), is also fully enclosed. This capping powerhouse accommodates an extensive range of caps, leveraging an electric screwdriver-operated capping system ideal for various cap types, including gun caps, spray caps, dropper caps, and more. To complete the packaging line, the Ninon Mix labelling machine takes center stage.

In our lineup of equipment, the K-Line S takes the spotlight as an enclosed linear filler, celebrated for its user-friendly interface and easy adjustability. Renowned for its exceptional versatility, this machine is highly regarded for its efficient cleanability. With the K-Line S, achieving a filling capacity of up to 3,000 liters per hour is possible while maintaining an accuracy of +/- 0.5% of the dosed volume. Integrated into the production flow using a linear conveyor (or a curved/U-shaped design, depending on your workshop layout), the VS2000 capping machine effortlessly handles the automatic feeding and capping of a diverse range of closures. The final phase of the packaging line is seamlessly executed by the Ninon Mix labeller, which can also be configured for cartoning upon request. The Ninon Mix stands out for its impressive versatility, capable of applying up to 5 self-adhesive labels.

Plate mounting: plates mounted in serie - optimized plate spacing for each unit from 1D to 5D (D, pipe internal diameter). Number of plates: calculation of the number of stages optimized according to the specifications of the application, each plate making it possible to reduce the maximum pressure while avoiding cavitation and critical flow phenomena. For more details, see our Frequently Asked Questions. Noise: check of the noise level of the complete unit estimated at 1 m. Multi-holes plates reduce the noise level per stage. Solutions of external envelopes can be recommended if the noise remains too high (consult us). Thermodynamics: the thermodynamic properties of the fluid are taken into account for the calculation of each stage: change of state, temperature, composition and density of the mixture, viscosity, compressibility factor. 3D simulation: possibility of a numerical simulation to complete the analytical calculations.