Results for
POMPES JAPY
France
Delivery guns with built-in oil meters, with mechanical meter
Request for a quotePOMPES JAPY
France
Delivery guns with a built-in oil meter, with electronic meter
Request for a quotePOMPES JAPY
France
Grease dispensing gun with an oval gear meter Pressure: 550 bars
Request for a quotePOMPES JAPY
France
Delivery guns with built-in oil meters, with a pre-set electronic meter
Request for a quotePOMPES JAPY
France
Delivery guns with built-in oil meters, with electronic meter
Request for a quotePOMPES JAPY
France
Designation: meter / flow meter Possible bodies: aluminium Seals: viton or PTFE Gears: aluminium Orifices: 1/8’’ - 4’’ Autonomous, mechanical, digital display unit with pulse generator or preselector
Request for a quotePOMPES JAPY
France
Materials: aluminium body - polypropylene turbine Orifices: 1" BSP M/F Max. pressure: 20 bars Digital meter: for low-viscosity fluids with a turbine-equipped measuring system Charge loss < 0.03 bar (120 l/min with diesel) Accuracy: ± 1% in the flow rate range Repeatability: 0.2% Temperature of use: from -10°C to +50°C Measuring system: calibratable turbine
Request for a quotePOMPES JAPY
France
Orifice: 1" M-M + adaptor 1" F-F Max. pressure: 10 bars 5-digit partial display Totalising meter: 6 digits
Request for a quotePOMPES JAPY
France
Materials: aluminium, polypropylene Orifices: 1’’ M-F Max. pressure: 20 bars Display: 5-digit partial Totalising meter: 6 digits Liquids: diesel
Request for a quotePOMPES JAPY
France
Materials: aluminium - Acetal resin gears Max. pressure: 70 bar (K400-I and K604-I), 20 bar (K700-I) Orifices: 1/2'' F (K400-I), 1"1/2 F (K604-I), 2" F (K700-I)
Request for a quotePOMPES JAPY
France
Materials: aluminium - Acetal resin gears Applications: oil Max. viscosity: 2000 mm²/s Orifices: 3/4" F Max. pressure: 70 bar
Request for a quotePOMPES JAPY
France
Materials: aluminium - Acetal resin gears Applications: diesel, anti-freeze Max. viscosity: 2000 mm²/s Orifices: 1" F Max. pressure: 30 bars
Request for a quotePOMPES JAPY
France
Materials: aluminium - Acetal resin gears Applications: diesel, oil, anti-freeze Max. viscosity: 2000 mm²/s (K200 and K604), 5000 mm²/s (K400) Orifices: 1/8’’ F (K200), 1/2'' F (K400), 1"1/2 F (K604) Max. pressure: 550 bar (K200), 70 bar (K400), 20 bar (K604)
Request for a quotePOMPES JAPY
France
Materials: aluminium - Acetal resin gears Max. pressure: 30 bars Orifices: 1/4'' F
Request for a quotePOMPES JAPY
France
Materials: aluminium, nylon, ceramic Version: with flange or clamp, on request
Request for a quotePOMPES JAPY
France
Materials: aluminium, nylon and ceramic Version: with flange or clamp, on request
Request for a quotePOMPES JAPY
France
The display unit enables you to connecting remotely to a meter with a pulse generator, via a cable with a max. length of 15 metres. It can be used in 3 different ways: As a simple remote display unit. In this case, it is powered by batteries. As a remote display unit and also for transmitting pulses to another external device, such as a PLC or another display unit. Here too, it is powered by batteries. As a remote display unit and for transmitting pulses to another external receiver, such as a computer, while being powered by the latter.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
POMPES JAPY
France
Materials: aluminium - Acetal resin gears Max. pressure: 70 bar Orifices: 3/4'' F
Request for a quotePOMPES JAPY
France
Materials: aluminium - Acetal resin gears Max. pressure: 30 bars Orifices: 1" F
Request for a quoteNORELEM FRANCE
France
The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.
Request for a quoteADIS FRANCE
France
Brass 1/4 turn meter tap CW614 / 617 MAIN FEATURES - Brass body - Prison nut secured by a hole for sealing wire - HDPE side sealed by compression and secured by a hole for sealing wire - A.C.S. certified product
Request for a quotePOMPES JAPY
France
Suction equipment comprising: 3/4" elbow joint with sleeve 1 metre of Ø 32 mm hose Foot valve
Request for a quotePOMPES JAPY
France
Suction and discharge of nearly all corrosive chemical products: strong acids, solvents with high aromatic content, chlorinated or oxygenated solvents, aromatic hydrocarbons, etc. Electric properties: UPE pipe and conductive rubber coatings, R ≤ 1 MOhm/lg.
Request for a quotePOMPES JAPY
France
Filter unit guaranteeing a double filtration For oil and diesel by absorbing the water and impurities present Filtration capacity of the first cartridge: 30 μ with water absorption Filtration capacity of the second cartridge: 5 μ for impurities Flexible suction hose: 3 metres with a built-in foot valve and a 3-metre discharge hose Structure: a trolley on wheels with a large diameter and retention tray
Request for a quoteID GROUP
France
To lay 50 cm ahead from danger, obstacle or level change: stairs, lifts, pedestrian crossings, platform edges … Advantages: warn the visually impaired of a danger easy and quick installation antislip compliant with NF P 98351 standard indoor or outdoor installation Layout: Degrease the underside. Glued with twocomponent polyurethane glue
Request for a quoteADIS FRANCE
France
Brass 1/4 turn safety valve to standard NF EN 1216X Features - Angle or straight model (full passage) - Captive nut secured by a hole for sealing wire - Non-removable cylinder lock - Several colour-coded locks available - Watertight lock-cover plug with sealing hole - Operating temperature: 0°C to 90°C - Maximum working pressure: 16 bar - Minimum test pressure: 24 bar - A.C.S. certified product
Request for a quoteDELTAFLUID
France
Differential pressure flowmeter with upstream pressure tap located at a distance of D from the upstream face of the orifice plate and downstream pressure tap located at a distance of 0.5D from the upstream face of the orifice plate.
Request for a quoteDELTAFLUID
France
Complete and flexible measuring element to facilitate on-site installationMounting of the primary element between flanges: ISO PN 2.5 to PN 420, ASME 150 # to 2500 #, others on consultation. Solder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application.THE FLOWMETER INCLUDES: the desired orifice (orifice plate, nozzle) the flanges to fix the orifice upstream and downstream straight lengths in accordance with the chosen standard ASSEMBLY AND ASSEMBLY DATA: The design, manufacture and assembly are carried out in our workshops in compliance with the standards (upstream and downstream pipe roughness, centering of the primary element, circularity of the piping, upstream and downstream straight lengths) in order to achieve optimal measurement accuracy. CHARACTERISTICS : orifice plate - see corresponding technical data sheet nozzle - see corresponding technical data sheet upstream, downtrseam straight lengths
Request for a quoteResults for
Meters - Import exportNumber of results
35 ProductsCountries
Company type