Results for
KARAPHARM
France
Design and manufacture of slings for lifting patients, people with disabilities and the sick.
Request for a quoteAVM AUTOMATION
France
Fixing by its sturdy end plate Drived by ISO pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Easier implementation Attached to the frame by its end thanks to a sturdy flange, they serve as a lifting module for assembly, loading and conditioning machines. By combining them with Type 37 linear manipulators, you can create 2axis ZX. Equipped with hydraulic shock absorbers, inductive sensors and flow limiters, these manipulators are ready to be installed and wired. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic shock absorbers and the inductive sensors this saves time, guarantees the reliability of the adjustment and ensures an optimal lifetime of these components. All these components are very common on the market and are very accessible, thus facilitating the maintenance
Request for a quoteNORELEM FRANCE
France
Aluminium. Note: The lifting column is an electrically driven system with fully integrated technology, which is maintenance-free and operated according to the plug & work principle. With a maximum speed of 8 mm/s, up to two lifting columns can be driven synchronously between 355 mm and 500 mm using the control (85300-10-90). Optionally, two controls can be connected together with a connection cable (85300-10-91X1000) so that four lifting columns can be driven synchronously. These lifting columns are suitable for thrust and traction loads. At least one control (85300-10-90) and one hand switch (85300-15-1) are required for commissioning the lifting columns. The mounting plate (85300-930040) enables the lifting column to be easily installed into the customer's application.
Request for a quoteNORELEM FRANCE
France
Ball lifting pins are quick and simple lifting devices with swing shackles. The balls are unlocked by pressing the push button. After releasing the push button, the ball is securely locked. Protected against corrosion and weather-resistant High-strength, hardened, extremely durable pin. TÜV-tested. Values X min., F1, F2 and F3 with 5x safety factor.
Request for a quoteNORELEM FRANCE
France
The lifting slings correspond to DIN EN 14921. The are made of highstrength polyester straps. The sling surface is also impregnated with polyurethane to make it abrasionproof. The working load limit (WLL) and the cord tonnage (tonne capacity per cord) are either woven into or printed on the sling. The safety label with the CE mark and technical data is firmly sewn to the sling. The colour of the sling corresponds to the colour code scheme for load capacities of textile type slings. The lifting slings have high UV resistance and low moisture absorption. Safety factor 71 Example WLL 1000kg = break load 7000kg. These lifting slings carry the CE mark according to the European machinery directive. The stated WLL applies to a vertical lift. By a basket lift the WLL is doubled.
Request for a quoteNORELEM FRANCE
France
Quick and easy lifting device with swing shackle and safety bar against unintended release. The balls are unlocked by pressing the push button. When the push button is released the balls are securely locked. Corrosion and weather resistant. High tensile, hardened pin for extreme loads with the high wear resistance. Temperature range max. 250 °C. CE certified. Values X max, and F1 with 5x safety factor. Accessory: Receiver bushes 07784.
Request for a quoteFORKLIFT ENERGIE
France
Advantage 1 We offer you several compatible technology solutions. Advantage 2 Budgetary constraints and maximum simplicity are taken into account, so you make the right choice! Benefit 3 Rapid design, technical support and after-sales service are also built into the project.
Request for a quoteAVM AUTOMATION
France
Manual lifting table Driving by leadscrew Guided by 2 rods Interest of lifting table These tables can be fixed by only one end thanks to a reinforced sole, for vertical or offset applications (using the mobile body). This simplifies installation directly on a plate or directly on the body of another table no need to build a vertical structure to fix it. In the fixed body version, they also make it possible to fix a load at the end (on the end flange) the quality of the embedding of the guide rods in this flange guarantees reliability even in the event of a bulky load (example label printer). Indeed, the assembly presented on the photo below corresponds to the height and width adjustment application of a label printer on a conveyor. The printer is attached to the end of the horizontal table and the base of the vertical table is attached to the side of the conveyor. For XY crossed tables, the tables are mounted one on the other directly by the body (long body version only)
Request for a quoteHAIR RESOURCES & DEVELOPMENT
France
A professional treatment specially designed for fine hair or hair lacking volume. Fills in the inner part of the hair fibre to make it more voluminous, while creating a protective shield against external aggressions. The hair is light but strong and densified, supple and easy to style for about 4 weeks.
Request for a quoteRM2M
France
Industrial Pulley Blocks for Wire Hoists and Winches Range: We provide industrial pulley blocks specifically designed for hoists and winches. Features: Equipped with 1 to 8 pulleys Standard equipment: single hook (DIN 15401 standard). Less common option: double hook (DIN 15402 standard). Lifting Capacity: lifting loads from 500 kg to over 250 tons. Applications: for cranes, overhead bridges, etc.. Upon request,: pulley blocks with motorized rotation of hook pulley blocks with locking of hook each 90° pulley block with weighing of load
Request for a quoteRM2M
France
1 central textile carrying element Flexible bare copper conductor class 6 (class 5 from 50mm²) Yellow polyurethane sheath -40 to +80°C 0.6/1kV Mechanical strength: 35 N/mm² of copper cross-section Resistant to hydrocarbons and UV Halogen-free Flame resistant Bending radius according to VDE 0298 Part 3 Colour coding according to VDE 0293 up to 5 conductors. Conductors numbered from 7 conductors + earth conductor.
Request for a quoteRM2M
France
Our load elevators, also known as material lifters (manual, electrical, pneumatic, hydraulic), will allow you to lift various loads (blinds, external air conditioning units, pergolas, engine blocks, etc.). Our manual range is available with the following specifications: -WLL 85kg, Height: 1.7-3.3m -WLL 100kg, Height: 1.65-4m -WLL 125kg, Height: 1.35-3.5m -WLL 125kg, Height: 1.45-4.56m -WLL 125kg, Height: 1.32-3.94m -WLL 150kg, Height: 1.53-4.5m -WLL 250kg, Height: 1.75-5.2m -WLL 280kg, Height: 1.75-5.2m Made in the EU Our electric range is available with the following specifications: -WLL 120kg, Max Height: 3.57m -WLL 90kg, Max Height: 4.87m Our pneumatic range is available with the following specifications: -WLL 136kg, Max Height: 3.8m -WLL 113kg, Max Height: 5.6m Our hydraulic range is available with the following specifications: -WLL 1500 kg, Height: 1-2.02m Made in France
Request for a quoteRM2M
France
Silent blocks are rubber parts placed between components that have only very small amplitude movements, to absorb vibrations and noise from machines equipped with motors. RM2M offers a wide variety of rubber silent blocks with diameter from 10 to 150 mm with the following characteristics: - 2 male threadings. - 2 female threadings. - 1 male and 1 female threading. - Diabolo versions with 2 male or 2 female threadings from Ø 20 to 130 mm. - Conical versions with 2 male or female threading from Ø 40 to 140 mm. - Stainless steel versions with 2 male threadings from Ø 20 to 60 mm. - Stainless steel diabolo versions with 2 female threadings from Ø 60 to 130 mm.
Request for a quoteRM2M
France
Electromagnets 200, 500 and 950 kg with permanent magnet for cold loads Self-contained battery model. Operating Modes: Manual: Simple use with buttons to activate or deactivate magnetization. Automatic: Quick activation and deactivation of magnet without manual order, ideal for hard-to-reach areas (no need to control with pendant button to take or release the load). Flexibility: Equipped with 3 power levels, they allow for sheet metal depiling. Benefits: Since it is a permanent magnet electromagnet, the battery is only used during demagnetizations, which gives it a long autonomy. There is no risk that the load falls because it is an electromagnet with permanent magnet. They are equipped with a force sensor that prevents the release of the load if the load is not put on the ground (which naturally prevents dropping).
Request for a quoteRM2M
France
The cam-type limit switch is a device used to control the movement of industrial and construction machinery. Information is transmitted via the shaft actuating micro-switches. Standard range BFCN: Gear ratio from 7.5 to 550 Number of cams from 2 to 5 Maximum rotation speed: 500 rpm IP55 Range BFRS: Gear ratio from 10 to 200 Number of cams 2 or 4 Maximum rotational speed: 500 rpm IP55 Options for both ranges: potentiometer, gear wheels, couplings, mounting flange, various cams The micro-switches are either deflection type or with positive opening. The choice between different types of cams allows to modify the reaction curve of the limit switches. On request, specific versions: Up to 12 cams Protection IP66 / 67 /69K Integrated potentiometer or encoder ATEX zone 2 and 21
Request for a quoteRM2M
France
The grounding brush, otherwise known as an earth brush, ensures good continuity of grounding as well as cleaning the running tracks. Standard versions are available in rectangular 40A, 100A, and 220A. On request, we can offer models with higher capacities (400A) or round brushes in Ø42 or 60 mm. Standard brushes consist of brass plates and stainless steel wires, but we can also offer stainless steel brushes versions on request ( plates and wires). Note, this product is not suitable for explosive environments (ATEX).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RM2M
France
Telecrane remote controls are available in three distinct ranges, all made of reinforced polymers for optimal robustness. F21-E3M: Specifically designed for applications such as hoists or sanitation trucks, they offer between 2 and 6 functions ( with 1 step buttons). F24: Equipped with 12 to 52 functions, these remote controls are versatile. They are ideal to control aerial work platforms, special vehicles, overhead cranes, winches, cranes, hoists, conveyors, hydraulic and pneumatic equipment, PLC interfaces, and many other industrial machines. F25: Designed for a variety of equipment, they offer from 6 to 11 functions, especially for needs such as lifting or steering ( available with 1 or 2 steps buttons). Possibility of increased range 500 meters between transmitter and receiver. Band Frequency 433MHz.
Request for a quoteRM2M
France
We offer various electrical collectors ( also called slip ring). The threaded tube range ( for use with vertical axis at maximum speed 30 rpm) includes: PRP: 6-36 tracks 20A, 4-24 tracks 30A, 4-12 tracks 50A, IP51. PRS: 6-15 tracks 20A, 4-14 tracks 30A, 4-10 tracks 50A, IP55. PMS: 6-30 tracks 20A, IP55, air passage in option. The capsule collector range equipped with 3 to 56 tracks (2A/6A/8A/ETHERNET, 10A, 20A 250VAC), available in IP51 or IP55 versions, and radiofrequency versions (8 to 36 tracks) at a maximum of 500 rpm. The FASTON connection collector range has diameters of 32 to 70mm, 2-8 tracks (2A/5A/14A, 20A), 240VAC/DC or 400VAC/VDC, IP51 or IP55 versions, and can be driven up to a maximum of 400 rpm. The hollow shaft collector range has an internal diameter from Ø 3 to 100mm, 2 to 96 tracks (2A-20A, Ethernet), IP51 or IP65 versions, and can be driven up to a maximum of 500 rpm. We also have a range of pneumatic and hydraulic rotary joints.
Request for a quoteRM2M
France
Cylindrical rubber buffer are used to stop and in all cases for amplitude limitation of a flexible element. Standard available buffers: Ø10 to 315 mm with male threading Ø10 to 150 mm with female threading Ø40 to 315 mm on plate
Request for a quoteRM2M
France
The pendant push-button boxes of the RBAB range are the result of extensive ergonomics studies. They are extremely resistant to shocks that may occur in the industrial, logistics, or construction sectors. RM2M offers these push-button boxes with 2 to 12 control elements including: single speed button, double speed button, emergency stop (optional 2 NC contacts), 2 or 3 position fixed selector, key selector 2 or 3 fixed positions. Electrical contact life of 3 million cycles. Stock versions for control of hoists, hoist trolleys, and overhead cranes.
Request for a quoteRM2M
France
Since 1903, STAHL, a pioneer in electric hoists, has been producing quality hoists, whether fixed with suspension hooks, with manual or electric trolleys. These hoists, globally recognized for their excellence, are designed for heavy-duty use, both indoor and outdoor. Main features: Protection: As standard, they offer IP 55 protection and are equipped with class F tropicalized motors, making them suitable for operation in humid conditions. A higher protection option, IP 66, is also available. Design: STAHL hoists are known for their compactness and reliability. For load 125kg to 6300kg. Special versions upon request : Low height electrical trolley stainless steel load chain hoists with 2 chain outputs ( for long loads) hoists for big bag
Request for a quoteRM2M
France
A switch disconnector ensures the interruption of current (under load) and the isolation of the load from the electrical supply. It provides optimal protection to users during machine maintenance as it can be locked with a padlock, preventing accidental startup during maintenance. Standard range: For 3P or 3P+N supply Ith 32 to 160A Available versions: In IP65 enclosure In enclosure with integrated fuse holder In cabinet bottom version (DIN rail mounting) with shaft (optional front plate) In panel mounting version (optional front plate)
Request for a quoteRM2M
France
RM2M offers a range of spring hose reels for fluids with either a fixed or swivel wall mount. The range is as follows: Painted steel reels. Maximum capacity 30m in 1''. Also available with 3/8'', ¼'', 1/2'', and ¾'' hose. For water and air. Maximum pressure 20 bar. Also available in 304 stainless steel version (not for food processing). Versions for hot water 130°C – 100 bar. Versions for hot water 130°C -200 bar. Versions for hot water 130°C -400 bar. Versions for oil 150 bar. Versions for grease 600 bar. Versions for diesel 10 bar. Versions for ADBLUE 10 bar. Versions for two identical hoses (simultaneous circulation of air and paint, for example). Versions for welding. Versions for LPG or methane. In addition to spring-retractable models, we can also offer motorized versions (hydraulic, pneumatic, electric (24VDC)) or manual versions with handle.
Request for a quoteLOUISON INDUSTRIES
France
Manufacturer of halyards for specific industries Louison Industries stands out for its expertise as a manufacturer of halyards for a variety of applications: Industrial halyards: Strong, durable halyards for lifting, anchoring, pulling and other industrial applications. Marine halyards: Halyards resistant to salt water, weather and demanding marine environments, ensuring reliable performance at sea. Sports and leisure halyards: Lightweight, durable halyards for outdoor activities, climbing, water sports and more.
Request for a quoteCREISCENDO
France
Steel cables, Winches, Hoists, Slings, Ropes, Buckets, Harnesses, Pulleys ..
Request for a quoteACIMEX
France
The manufacture of segments is a significant operation which requires the creation of a large manufacturing plant and very significant handling means, given the weight and size of these bulky loads. Indeed, the weight of a single segment can vary from 3 to 17 tonnes. On site, ACIMEX lifters have many uses in the plant and in storage areas: standalone vacuum lifters and storage grabs are frequently used by our customers as well as stripping lifters, turners, triple clamps or tables.
Request for a quoteACIMEX
France
Bespoke machines are pieces of equipment installed on production lines (handling line, output line, etc.) and which are used to move different types of heavy loads from point A to point B (storage area). ACIMEX is specialized in the manufacture of equipment fitted with suction cups which detect the weight, the diameter and the size of heavy loads in order to grip them in complete safety and so facilitate the production process. Using its know-how in custom design and manufacture, ACIMEX innovates constantly to create bespoke machines that meet the needs of each of its customers. Two types of bespoke machines have been developped at the beginning of 2017 in ACIMEX factories, one to grip sandwich panels of 160 kg safely, and the other to move and store graphite electrodes. Evidence, once again, that ACIMEX offers turnkey solutions to its customers, and this regardless of the type of handling performed.
Request for a quoteACIMEX
France
Fitted with rubber suction cups with various shapes and dimensions, ACIMEX aircraft lifters guarantee full respect for the integrity of the parts. An advantage for businesses in the aircraft sector who work daily with parts machined from expensive and noble materials with high added value, such as the carbon. These automatic handling devices can lift up to five tonnes, and guarantee that the aeronautical parts are not damaged or deformed. In addition, these machines with their two separate vacuum circuits provide optimum safety for the operator. The handling equipment that ACIMEX designs thus provides safety and reliability in aircraft sector factories.
Request for a quoteResults for
Lifts - Import exportNumber of results
38 ProductsCountries
Company type