Results for
MDP TEAM
France
Injection, bi-injection and overmolding of technical and appearance parts Series from 100 to 1 000 000 parts Single and multi-cavity injection and overmolding Injection of structural parts Injection of appearance parts Injection of transparent parts Overmolding of inserts Finishing: painting, surface treatment,... Metrology follow-up
Request for a quoteREP INTERNATIONAL
France
This press is intended for rubber overmolding of cables used for stone cutting. The cables must be positioned in the mould in the stretched position, and over moulding takes place successively in the jog mode. The “CFrame” design with a closing force of 1,000 kN has been tailored to these presses, because this technology gives access to all sides of the mold, what is essential for the successful finalization of this very special overmolding.
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteREP INTERNATIONAL
France
URP Joint venture United Rubber Machinery Strategic Alliance for Asian injection molding machine market between REP and LWB Steinl,
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 500 kN. Size of the platens 300 x 300 mm. Injection volume 125 cm³.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 4,000 kN. Platen size 750 x 800 x 80 mm. Injection volume 2,000 cm³ or 5,000 cm³. The H610 allows Automated productions. Injection molding (more or less simple parts). A small footprint and height. An optimized cycle time. etc.
Request for a quoteREP INTERNATIONAL
France
Type V710 Core 5,100kN G10 is the 10th generation of REP injection molding presses with two versions available, on the one hand the Lean range G10 Core and on the other hand the Performance range G10 Extended. The G10 Core is a machine line, which has been matched for less demanding processes. It features all major costoptimized functionalities and the expertise of REP.
Request for a quoteREP INTERNATIONAL
France
Type V510 Extended 3,050kN Machine features Clamping force 3,050 kN. Size of the platens 500 x 630 mm (630 x 630 mm optional). Injection volume 1,000 or 2,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions.
Request for a quoteREP INTERNATIONAL
France
Type V710 Extended 5,100kN Machine features Clamping force 5,100 kN. Size of the platens 630 x 800 mm (800 x 800 mm optional). Injection volume 2,000; 5 000; 8,500 or 11,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions.
Request for a quoteREP INTERNATIONAL
France
Designed for the manufacture of highvoltage insulators (550 kV), this press is one of the largest presses made by REP. The dimensions of the parts to be injected explain the huge size of the press 660 mm in diameter, 2,600 mm long, moulded in one go. The production of a complete insulator is therefore performed in one or two cycles, thus significantly increasing the profitability and reliability of the parts. Machine features Closing force 24,000 kN Size of the platens 1,500 x 3,000 mm Injection volume 25,000 cm³ x 2 (2 injection units)
Request for a quoteREP INTERNATIONAL
France
Economic injection molding presses. A REP injection unit combined with a closing unit of a Tung Yu press. This combined technology offers openended options Separate extrusion and injection thanks to the "Y" type injection unit. 2 or 3stroke closing unit. Proportional closedloop temperature control. Optimized floor space and ergonomics thanks to its modular design.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 2,544 kN (station A) / 2 x 785 kN (station B & C). Size of the platens 630 x 500 mm. Injection volume 1,000 cm³; 2,000 cm³ or 5,000 cm³. The CMX (CompactMultiStation Generation X G10) is a 4station injection molding press 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces 1,540 kN (CMX1) or 2,544 kN (CMX2).
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 1,540 kN (station A) / 2 x 502 kN (station B & C). Size of the platens 510 x 360 x 55 mm. Injection volume 1,000 cm³; 2,000 cm³ or 5,000 cm³. The CMX (CompactMultiStation Generation X G10) is a 4station injection molding press 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces 1,540 kN (CMX1) or 2,544 kN (CMX2).
Request for a quoteREP INTERNATIONAL
France
Electric horizontal machine, ultra compact for an optimized productivity! Suitable for the injection of many elastomers (rubber, silicones, etc.) Compact & ergonomic 33% smaller footprint compared to other presses on the market All features and production capacity in less than 4 meters length Productive & electric powered performance Productivity +20% 60% reduction in injection time 30% decrease in cure time Sustainable & Ecofriendly 50% power consumption 100% Water consumption 14% Waste reduction Oil free The “SmartWire” technology allows production to become autonomous and connected.
Request for a quoteREP INTERNATIONAL
France
Machine features Closing force 3,200 kN. Size of the platens 1,250 x 630 mm. Injection volume 1,000 cm³. Machine developed for largeseries injection molding involving parts with inserts, such as for example the injection molding of housing seals.
Request for a quoteREP INTERNATIONAL
France
The CMX (Compact Multi Station of the generation 10) This new machine replaces the former CMS generation and makes the third generation of rotary machines with 2 major innovations. Integration of the processcontrol system of the latest generation (generation 10) with all 4.0 functions. Product range with the CMX1 (160T clamping force) and the CMX2 (250T clamping force). New generation of 4station molding machines The REP solution for large productions with optimal efficiency 90% increase in productivity compared with a singlestation press. 68% increase in productivity compared with a press equipped with a double plate stripping kit. The CMX machine is available with two clamping forces 160T (CMX1) or 250T (CMX2).
Request for a quoteREP INTERNATIONAL
France
Performance range G10 Extended Intelligent, elegant and efficient The G10 is the 10th generation of REP injection molding machines. With its ergonomic design and intelligent onboard solutions, the G10 generation is branded "Infinitely Smart". The G10 is available in two versions, G10 Core (Lean range) and G10 Extended (Performance range), designed to better meet the varied needs of customers. The G10 Extended is a line of presses adapted to the most demanding processes. The G10 Extended is progressively replacing the G9 generation machines and ranges from 1,600 kN (V410) to 10,200 kN (V910).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
REP INTERNATIONAL
France
Horizontal range H49, H59, H610 The range is designed for easy implementation of automated production processes, namely injection moulding of more or less sophisticated technical parts. Clamping force available from 1,950 kN to 4,000 kN. Shown above press types H49, H59 and H610 (with and without brush).
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 1,950 kN. Size of the platens 450 x 450 mm. Injection volume 1,000 cm³. The H49 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. An optimized cycle time. etc
Request for a quoteREP INTERNATIONAL
France
CFrame Injection molding machine V19. Optimized floor space and maximum accessibility. The V19 is an advanced Cframe press of 400 kN available in 2 versions, plastic or rubber injection. Its accessibility from three sides makes it ideal for the injection molding of profiles and extruded hoses.
Request for a quoteNORELEM FRANCE
France
Injection moulded, straight teeth. Engagement angle 20°. Axis angle = 90°. Machined bores from module 1.5. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. Bevel gear wheels are supplied as single components. To obtain a pair of bevel gear wheels, please order the specified mating gear as well.
Request for a quoteNORELEM FRANCE
France
Injection moulded, straight teeth. Engagement angle 20°. Machined bore. Polyacetal, white. Polyketone, ivorytone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. The torques specified in the tables relate exclusively to the toothing.
Request for a quoteNORELEM FRANCE
France
Injection moulded, straight teeth. Engagement angle 20°. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Due to the material properties, plastic gear racks are not straightened. L= nominal length 250 mm. The actual length is roughly a whole multiple of the pitch.
Request for a quoteLOUISON INDUSTRIES
France
As a state-of-the-art plastic injection moulding company, we guarantee the highest standards of quality. The thermoplastic granules, with a diameter of 2 to 3 mm, are carefully sucked into a hopper and then heated to high temperature. The molten, malleable material is then injected into the mould, selected according to your specifications. Our high-precision injection moulding machines apply high pressure to allow the plastic to spread evenly in the mould, giving it its final shape. In just a few seconds, the part cools and solidifies, ready to be ejected into a recovery bin. Integrating an automated system into our plastic injection process enables us to minimise costs - Weight: Up to 400 g - Texture: Any texture on request - Composition: Polyester, Polyamide, Polypropylene....
Request for a quoteLOUISON INDUSTRIES
France
Textile overmoulding has a wide range of applications in various industrial sectors. Our customers in the automotive, electronics, sports, medical and other sectors benefit from our expertise in textile overmoulding to design bespoke parts to meet their specific needs. In the automotive sector: it improves occupant comfort by providing a softer feel. It can also improve soundproofing and thermal insulation. Discover the overmoulded part, a mechanical link between two parts, a textile support and an injected plastic part, in a permanent manner. Overmoulding offers a number of advantages: No gluing stage in the manufacturing process High design flexibility Prevents components from coming loose Production of multi-material components Improved resistance to shock and vibration Improved strength and structure of parts
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 2,600 kN. Size of the platens 500 x 630 mm (or 560 x 630 mm optional). Injection volume 1,000 or 2,000 or 5,000 cm³.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 3,100 kN. Size of the platens 550 x 550 mm. Injection volume 1,000 cm³ or 2,000 cm³. The H59 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. Optimized cycle time. etc.
Request for a quoteResults for
Injection and - Import exportNumber of results
64 ProductsCountries
Company type