Gold - Import export

The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes.

Recommended for viscous fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

For a better precisionSolder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application.

Mounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

Recommended for low flow rates and / or viscous fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

Economical solution thanks to the reduction of upstream and downstream straight lengthsStandard: Element designed on the basis of ISO 5167-1 & ISO 5167-2 or ASME FC-3M. Mounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application

Suitable for large flow rates with low permanent pressure dropSolder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application. Fluid: liquid, gas, steam. Diameter of pipes: from 65 to 500 mm.

Suitable for large diameters and / or low permanent pressure dropMaterial: Standard: carbon steel, stainless steel, others according to your application.

Orifice plates or diaphragms are the most commonly used primary elements for differential pressure flow measurement. They allow measurement over a wide range of flow rates and for a wide range of pipe diameters. There are several types: the sharp-edge orifice plate, the best known, the other concentric plates with conical inlet and quarter circle plate for the measurement of low flows or viscous fluids and the eccentric plate or segmental plate for the measuring dirty or impure fluids. Finally, the multi-hole / conditioning orifice plate allows a measure of quality while providing a minimum footprint. Inserted within a circular pipe, they create an obstacle, increase the speed of the fluid and generate a pressure difference between upstream and downstream of the restriction. This differential pressure measurement is proprotional to the flow rate value.

Recommended for dirty, charged or diphasic fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

The venturi tube has a convergent inlet, a throat and a divergent outlet. It is a differential pressure flow meter well known to create a low permanent pressure drop; thus, it is suitable for measuring, for example, a low pressure flow rate. More over, it requires short upstream and downstream straight lengths. There are different types of venturi tubes : the machined venturi made from a solid round for small size parts, the rolled welded venturi made from sheet metal for larger pieces up to 1200 mm diameter and the venturi "as cast" allowing a better accuracy up to 800 mm diameter.

Suitable for small diameters and / or low permanent pressure dropMaterial: Standard: carbon steel, stainless steel, others according to your application. Fluid: liquid, gas, steam. Diameter of pipes: from 50 to 250 mm.

Plate mounting: plates mounted in serie - optimized plate spacing for each unit from 1D to 5D (D, pipe internal diameter). Number of plates: calculation of the number of stages optimized according to the specifications of the application, each plate making it possible to reduce the maximum pressure while avoiding cavitation and critical flow phenomena. For more details, see our Frequently Asked Questions. Noise: check of the noise level of the complete unit estimated at 1 m. Multi-holes plates reduce the noise level per stage. Solutions of external envelopes can be recommended if the noise remains too high (consult us). Thermodynamics: the thermodynamic properties of the fluid are taken into account for the calculation of each stage: change of state, temperature, composition and density of the mixture, viscosity, compressibility factor. 3D simulation: possibility of a numerical simulation to complete the analytical calculations.

A spectacle blind consists of a spade and a spacer which are manufactured for the purpose of installation in one piece. It is used as a safety device to isolate a particular section of pipe or equipment when this section or this equipment is to be inspected or decommissioned. It is different from a valve in the sense that the obturator is considered an isolation device. Depending on the size and class of flanges, it will be more suitable to offer two separate components (spade and spacer) instead of a spectacle blind to limit weight and avoid handling heavy parts.

Orifices: dimensioned according to the fluid, the pressure drop or the flow to be achieved going through the restriction. Plate thickness: calculated taking into account the pressure drop generated by the plate and the diameter of the pipework in order to avoid a deformation of the plate. For more details, see our Frequently Asked Questions. Noise: the number of orifices is determined according to the level of noise not to be exceeded. The maximum noise level depends on the operating conditions: limited to 85 dB(A) by the regulatory body for an average daily exposure in continuous operation. Intermittent or emergency operation - acceptable upper values ​​(see corresponding regulations). If the noise level is still too high, it is possible to switch to a multi-stage restriction orifice. Cavitation: the cavitation level is checked for each plate and the orifices are calculated to avoid cavitation. For more information on cavitation, see our Frequently Asked Questions.

Orifice diameter: dimensioned according to the fluid, to the pressure drop to be achieved and to the flow going through the restriction. Plate thickness: calculated taking into account the pressure drop generated by the plate and the diameter of the pipework to prevent plate deformation. See more details in our Frequently Asked Questions. Noise: control of the estimated noise level at 1 m. In case of high noise level, refer to the multi-hole plate. Cavitation: The cavitation level is checked for each plate. In the presence of cavitation, a multi-stage restriction orifice alternative may be proposed depending on the operating conditions of the restriction. For more information on cavitation, see our Frequently Asked Questions. Critical flow or choked flow: if the fluid reaches its maximum speed when passing the restriction, its flow can not increase. A multistage solution can be proposed depending on the operating conditions of the restriction. For more information on critical flow

The sonic state of the nozzle means that the flow reaches the speed of sound when going through the throat. Under these conditions, the flow rate depends mainly on the upstream pressure and the fluid temperature. This makes it possible to deliver a stable and perfectly known flow, independent of the downstream pressure conditions of the nozzle. This nozzle is thus used to provide a standard flow value when it comes to calibrating another type of flow meter.

Suitable for large flows with high speedsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. or solder connection Material: Standard: carbon steel, stainless steel, others according to your application.

The nozzle has a radiated input and is therefore suitable for fluids flowing at high speed. Unlike an orifice plate whose edge could be damaged, the ISA 1932 nozzle and the long radius nozzle according to the names of the standard are quite suitable for these applications. For corrosive or aggressive fluids, the surface in contact with the fluid can be covered with a special coating to improve their lifetime.

Recommended orifice plate for dirty, charged or two-phase fluidsMounting between flanges: ISO PN 2,5 to PN 420, ASME 150 # to 2500 #, others on consultation. Material: Standard: 304L / 316L stainless steel, others according to your application.

Hoop Tile Earrings Handmade with Stainless Steel in KC Gold Finish. These hoop earrings are made with Portuguese Tiles that makes a beautiful portuguese tile jewelry gift suggestion, for anniversaries, birthday's, mother's day, Christmas gift giving or any other special occasion. Very lightweight but catchy, suitable for summer and sunny days. Winter days are great to wear them too, but avoid water, lotions, perfumes or makeup, due to the nature of the handmade work Dimensions: - 5 cm diameter wide, or 2 inches Main Features: Featured Original Jewelry Gold Stainless steel Unique patterns and designs Anti allergic Light Weight Durable Ethical Jewelry

Hoop Tile Earrings Handmade with Stainless Steel in KC Gold Finish These hoop earrings are made with Portuguese Tiles that makes a beautiful portuguese tile jewelry gift suggestion, for anniversaries, birthday's, mother's day, Christmas gift giving or any other special occasion. Very lightweight but catchy, suitable for summer and sunny days. Winter days are great to wear them too, but avoid water, lotions, perfumes or makeup, due to the nature of the handmade work Dimensions: - 4 cm diameter wide, or 1.57'' inches Main Features: Featured Original Jewelry Gold Stainless steel Unique patterns and designs Anti allergic Light Weight Durable Ethical Jewelry

These Italian tiles earrings are made to replicate real ceramic antique tiles that are found on monuments, public buildings and private houses. Perfect for daily wearing Goes with Casual chic outfits The earrings measure about 55 mm x 28 mm Stainless steel metal: highly resistant, doesn't change color and anti allergic It's very light weighted The replica is made on a wood tile The wood piece is cut, sanded and ready to be transformed The design is transferred to the wood It's then sealed and coated with water based and non toxic varnish, just like in ceramic pieces Nickel and lead free earring base Anti-allergic Lightweight Unique designs only found on this shop Handmade in small production and usually made to order

These Moroccan tiles earrings are made to replicate real ceramic tiles. Perfect for any daily occasion Arabesques measure around 35 mm x 25 mm Hexagon tiles measure around 18 mm x 18 mm The final design is light weighted The replica is made on a hexagon wood tile It's then sealed and coated with water based and non toxic varnish, just like in ceramic pieces Hand painted finish Mixed metals: both silver and gold Nickel and lead free earrings base Anti-allergic

Portugal Heart Tile Rose Gold Necklace, Antique Tiles, Stainless Steel, Delicate Lariat Chain Necklace, Dainty Portuguese Tile Jewelry This Portuguese necklace, was inspired by the design, beauty and aesthetics of the Portuguese tiles, now protected by law and elevated to World's Heritage by UNESCO. Perfect for daily wearing Goes with Casual chic outfits The tile measure about 12 mm x 12 mm or 0.5'' inch Rose Gold Stainless Steel The tile replica is made on a wood tile The wood piece is cut, sanded and ready to be transformed The design is transferred to the wood It's then sealed and coated with water based and non toxic varnish, just like in ceramic pieces Nickel and lead free metal base Anti-allergic

S100% made from high quality Portuguese cork and Eco friendly materials. This necklace is made to represent the Portuguese sunlight and warm weather that allows cork to grow with such quality in arid land fields. The pendant is gold filled and completed with hand cut tiny and small circles of Portuguese cork. The chain is in gold stainless steel in 18 inch size or 45 cm (it can vary a little bit due to measurements). For custom chain size, please contact me. Main Features: Anti allergic Lightweight Vegan No animal skin or test used or performed on No tree was harmed in the process Organic Sustainable Durable Ethical Jewelry Handmade

Cork steel hoop earrings, handmade with Portuguese cork and stainless steel thin ear wires, that prevents allergies and are easy, light weighted and safe to wear all day. 100% made from high quality cork from Portugal, well known to be the best cork and worldwide number one cork producer, made together with stainless steel, proven to be nickel, cadmium and lead free. D E S C R I P T I O N & M A T E R I A L S ∙ Material: High quality Portuguese cork and stainless steel ear wires Ear Wires Finish: Silver, Gold and Rose Gold Featuring 4.8 cm diameter hoop earrings Handmade in France Anti allergic Vegan PETA approved No tree is harmed, no animal tests made Resistant & Durable Handmade finish and detail Nickel and lead-free earring ear wires Follow of the European norms for metal use safety Ethical production

The dainty stud earrings features a tile pattern typical from Portugal. It sits beautifully on the earlobe and looks stunning, whether worn alone or paired with other earrings if you have several piercings. Material: High Quality Solid Surgical Steel and Wood Tile. Finish: Gold Steel Size: 13 mm in total and 10 mm the inner tile Earring backs included.

Hoop Tile Earrings Handmade with Stainless Steel in Light Gold Finish. These hoop earrings are made with Portuguese Tiles that makes a beautiful portuguese tile jewelry gift suggestion, for anniversaries, birthday's, mother's day, Christmas gift giving or any other special occasion. Very lightweight but catchy, suitable for summer and sunny days. Winter days are great to wear them too, but avoid water, lotions, perfumes or makeup, due to the nature of the handmade work Dimensions: - 5 cm diameter wide, or 2 inches Main Features: Featured Original Jewelry KC Gold Stainless steel Unique patterns and designs Anti allergic Light Weight Durable Ethical Jewelry