Electronics - Import export

From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation

Materials: aluminium, polypropylene Orifices: 1’’ M-F Max. pressure: 20 bars Display: 5-digit partial Totalising meter: 6 digits Liquids: diesel

The display unit enables you to connecting remotely to a meter with a pulse generator, via a cable with a max. length of 15 metres. It can be used in 3 different ways: As a simple remote display unit. In this case, it is powered by batteries. As a remote display unit and also for transmitting pulses to another external device, such as a PLC or another display unit. Here too, it is powered by batteries. As a remote display unit and for transmitting pulses to another external receiver, such as a computer, while being powered by the latter.

Materials: aluminium - polypropylene Max. pressure: 20 bar Orifices: 1" M-F

Delivery guns with built-in oil meters, with a pre-set electronic meter

Materials: aluminium - Acetal resin gears Max. pressure: 30 bars Orifices: 1" F

Materials: aluminium - Acetal resin gears Max. pressure: 70 bar (K400-I and K604-I), 20 bar (K700-I) Orifices: 1/2'' F (K400-I), 1"1/2 F (K604-I), 2" F (K700-I)

Materials: aluminium - Acetal resin gears Max. pressure: 70 bar Orifices: 3/4'' F

Hema QCARE is dedicated to the particulated and non-particulated Home and Personal Care market. It benefits from Hema’s proven expertise built up over several years, in the area of filling complex products for large international groups. QCARE is available in Monobloc configuration with capper or Combi associating blowing, filling and capping for PET bottles.

Hema NUTRI is dedicated to the particulated and non-particulated sauce and dressings market. It benefits from Hema’s proven expertise built up over several years, in the area of filling complex products for large international groups. It is available in Monobloc configuration with capper or thermosealer. NUTRI filler can also be synchronised to a neck trimmer or a rinser. Combi configuration associates blowing, filling and capping for PET bottles.

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

Stamped leadframes are designed to support and accomodate electronic components and PCBA. They can be made with full or selective tin, nickel, silver or gold plating depending on the final requirement. They can be made with pressfit terminals to be inserted into Printed circuit boards. 3 D stamped leadframes can also be designed to your needs. Overmolded leadframes made with high performance plastic resins are designed to support components which are protected in a housing. The overmolding housing allows for the integration of : - the connection area for power components bonding - the output connector to the customer interface - specific terminals to accomodate components to be soldered in electric capacitors for example.

Connectors made by Axon’ Mechatronics are tailor-made. They are designed to be : -assembled to PCBA through different kinds of processes : wave soldering, reflow soldering or solderless solution. -assembled on Flat Flexible Cables or Flat Print Circuits with different processes : soldering, crimping, locking. -terminated to wire by welding or crimping. -assembled by electrical welding

In addition to the standard range of Micro-D connectors and assemblies, axon’ is able to develop custom designed solutions, based on Micro-D twist-pin contact technology. Such solutions are ideal when the operating conditions are critical for applications including aerospace, military, industrial, medical or off-shore. Advantages Space saving Integration with specific cable or harness configuration, for a finished product High EMC protection Special shape to facilitate mechanical integration Customised solutions Extreme miniaturisation Twist-pin male contact : high reliability of electrical connection in severe conditions of temperature and vibration, low contact resistance, 500 g mechanical shock resistance. Construction A complete range of standard Micro-D connectors : Twist pin contacts Metal/plastic shell Rectangular and circular connectors Solder cup and crimped terminations Pigtails PCB connectors (CBR/ BS/ BR, surface mounting) Saver/microstrip

Axon’ offer a complete range of Micro-D and Nano-D interconnect assemblies which is ideal when the operating conditions are critical for applications including aerospace, military, industrial, medical or off-shore. Advantages Space saving wiring solutions EMC protection Special material to facilitate mechanical integration Customised solutions Miniaturisation up to Nano-D Twist-pin male contact : high reliability of electrical connection in severe conditions of temperature and vibration Operating temperatures : -55°C to 150°C (MIL-STD-83513) Construction Insulated wires and cables Total Micro-D connector range: Plastic and metal shells with LCP insert PCB, pigtails, solder cups, savers, PCB connectors (CBR, BS, SM, …), strip connectors, … Overmoulding solutions Various configurations are possible : shaped assemblies, multi-branch harnesses, … Range of QPL-products Nano-D pigtails and PCB connectors

Axon' design and manufacture composite cables specially designed to meet customer requirements irrespective of the application. They are able to resist the most demanding electrical, mechanical and environmental requirements. Advantages Dependent on the application Flexibility Flexlife, resistance to torsion Resistance to fuel, heat and solvents EMI protection Resistance to sterilisation (medical application) Construction Flat or round construction integrating flat or round wires, coaxial cables, tubes, shielded cables, ... Hybrid electrical, electro-optical cables Composite cables insulated with fluorinated materials, heavy metal free materials, halogen free materials, PTFE, celloflon®, vitax™, PEEK, silicone and other materials suited for your applications Applications Electromechanics Engines Machines Robots Medical imaging Endoscopy Radars Missiles Electronic systems Satellite cabling Research, ...

- Based on the highly reliable Twist Pin contact technology - Operating temperature: from -55°C to 200°C. - Metric thread version for space saving. - Three lug bayonet version for quick connect/ disconnect. - Triple start thread (anti-decoupling) version: highly vibration-proof ratchet system. - Breakaway version for quick connect/disconnect. - Plastic shells: easy to use, very small and lightweight. - A large range of panel mount configuration