Concrete - Import export

TECHNICAL DEFINITION Levelling filler for vertical substrates and for use on ceilings for poured concrete or pre-cast slabs. Ideal for the preparation of pre-cast slabs, formwork concrete and for the renovation of textured finishes or fibreglass with a paint finish. TECHNICAL CHARACTERISTICS • Dry extract : 75% • Density : 1.86 • VOC content : less than 1g/l COMPOSITION AND APPEARANCE Water, calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant. AMOUNT REQUIRED From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat. APPLICATION SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats. The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Status: Natural Apperance: paste Alcoholic degree: none Miscibility: Alcohol; Oil-soluble

Ideal for creating a space dedicated to fun, this concrete table tennis table from JAD Groupe is even more robust thanks to its reinforced concrete design. It's maintenance-free, so you can create a play area that's perfect for sports. Suitable for outdoor use, this concrete furniture combines both aesthetics and safety for all users with its rounded corners, and no lifting equipment is required to install this reinforced concrete ping pong table. Made of reinforced concrete Freestanding Can be laid or embedded (pre-drilled base) Consists of 2 legs, 1 spacer, 2 tops and a net Guaranteed bubble-free Glazed effect for a perfect finish Colour tinted in the mass Several colours available (Terre de Sienne, Green, Blue, Yellow) Fixing and assembly accessories included 2740 x 1525 x 760 mm

Distriplast is the European manufacturing leader in PP corrugated sheeting for the building sites. Manufacturing 24/7 in Dunkirk, close to UK with corresponding short lead times. Made of black reground PP, and for the LPS1207 sheets from prime PP.

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment BENEFITS • The 3piece monobloc cutting insert is an allconcrete solution • Selfcentering point provides precision when starting the hole

The short flute developed at our request by the company DIAGER makes it possible to meet the constraints of asbestos sites and avoids gel drips on the operator during drilling in the roof. It is also a visual cue to avoid drilling too deep. SPECIFICATIONS • Solid carbide insert with selfcentering point • Pad angle 135° • 3 simultaneous contact points • The new propeller offers a double cut halfround and square • SDSplus compatible attachment BENEFITS • The 3piece monobloc cutting insert is an allconcrete solution

The pavers are created from a drop of glass pressed at a temperature of 1050°C. Shell pavers are then annealed at 560°C to remove internal stress.

The pavers are created from a drop of glass pressed at a temperature of 1050°C. Shell pavers are then annealed at 560°C to remove internal stress.

The pavers are created from a drop of glass pressed at a temperature of 1050°C. Double-walled pavers are soldered at 800°C, trapping thin air between the two glass shells.

The vacuum lifters designed by ACIMEX guarantee enhanced safety on construction sites because only one worker is needed to operate the vacuum lifter. Consequently, the movements are performed remotely, which enables the technician not to be in contact with the part.

USE : Extracting of Bolts and Sleeper Screws Bolts that are either broken inside of the concrete Sleepers or loose. ADVANTAGES : Simple and high-effiency : 90 Bolts removed per day by 3 Operating Agents. Note that proceeding in this way, you can achieve significant savings by avoiding the necessity to replace concrete Sleepers. - T-shaped body with tightening handle for holding collet. - Holding collet in treated steel with jaws - 1 Balance Lever to extract broken bolts. - Net Weights : Wrench = 14 Kg / Lever = 9 Kg - For Ø 18 mm Bolt - Ref. CE 18 - For Ø 22 mm Bolt - Ref. CE 22 - Total Height = 1.10 m - Length of the Arm = 0.80 m. - Length of the Crank Handle = 0.27 m. OPTIONS : SPARE PARTS = Holding Collet for Ø 18 mm Bolt - Ref. P.I.18 Holding Collet for Ø 22 mm Bolt - Ref. P.I.22 BORING BIT Ø 23 x 30 mm - Length 140 mm (Graffenstaden Shank) - Ref. TR.23 (Cleaning of the Bolt Hole )

Laminated with a non-woven backing that is extremely flexible and designed to accept all roof coatings, paints or liquid urethane finishes. Excellent for sealing the edges of concrete basements or terraces prior to pouring the liquid urethane finish. Tapes can be installed in just a fraction of the time that it takes to install or repair surfaces using conventional flame & heat welding techniques.