Results for
BORFLEX SERVICES
France
Leaders in the international design and production of fabrics coated with natural or synthetic elastomers. 1 or 2-sided coating
Request for a quoteYOXEONE
France
Wool coat and leather 100% wool / cow leather Lining 98% polyester 2% elastane Wash prohibited Dry cleaning Made in France
Request for a quoteSEMIN
France
SUITABLE SURFACES All types of tapered-edge, paper-lined plasterboard, with or without insulation (glass wool, rock wool, polystyrene). COVERINGS First undercoat for plasterboard. Smoothing compound. PACK SIZE Tubs of 5 and 25kg on covered pallet. STORAGE 9 months in unopened original packaging, away from frost and extreme heat. AMOUNT REQUIRED Approximately 500 g/m² of plasterboard. DRYING TIME The second coat can be applied 24-48 hours after the first, depending on the ambient conditions. RECOMMENDED APPLICATION Always leave a minimum gap of 20 cm between doors and windows and the first plasterboard joint.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SEMIN
France
TECHNICAL DEFINITION CE 78 PERFECT’JOINT is a ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, thickener, pre- servation agent and various adjuvants. The paste is white. SUITABLE SURFACES All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with mitred edges and carded surfaces. COVERINGS Plasterboard primer. Smoothing filler. REFERENCE DOCUMENTS • CE marking • DTU 25.41 and DTU 25.42 • NF EN 13963 • DoP PACK SIZE 7 and 25 kg buckets. STORAGE 12 months in original unopened packaging away from frost and high temperatures. APPLICATION Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.). Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then ad- ding the tape (milled face against the jointing coa- ting).
Request for a quoteSEMIN
France
COMPOSITION AND APPEARANCE Powder coating made of cement, sand, water, calcium carbonate, resin and various additives. The resulting paste is white. SUITABLE SURFACES All types of rough surfaces constructed from dry and wet masonry: cement, concrete, cinder blocks, stone, brick PACKAGING Bags of 6 and 20 kg. APPLICATION Apply using a plastering trowel : 1 or 2 coats to smooth over any bumps. Apply in 2 cross-coats using a wide brush (use a more liquid consistency). Clean tools with water. APPLICATION THICKNESS Max 5 mm. CONSUMPTION Approximately 1.1 kg per m²/mm of thickness. TECHNICAL FEATURES • Setting time : 3 hrs • Adhesion : compliant with standard EN 16566 • AFNOR classification NFT 36.005 - Family IV class 4c • High vapour permeability : class V1 according to ISO 7783-2 • Low liquid permeability : class W3 according to ISO 1062-3 RECOMMENDED APPLICATION When applying with a wide brush, mix to a more liquid consistency (like whitewash).
Request for a quoteSEMIN
France
TECHNICAL DETAILS Interior ready-to-use smooth finish coating, easy to apply - requires less sanding down than a traditional coating and therefore creates less dust. Apply with spatula, then sand down. Less dust is created, and the dust is less volatile. SUITABLE SURFACES Interior walls and ceiling : plasterboards, gypsum blocks, concrete, cement coating, aerated concrete, sealants. REFERENCE DOCUMENTS DTU 59.1. PACK SIZE 25 kg bucket. AFNOR NFT 36.005 AMOUNT REQUIRED From 0.6 to 1 kg/m² depending on quality of surface. DRYING TIME 6 to 24 hours depending on conditions and quantity applied. RECOMMENDED APPLICATION To avoid all traces of filler, finish with a slightly rounded action.
Request for a quoteLOUISON INDUSTRIES
France
Depending on your requirements, we can offer a finished product with all the properties you expect: - Visual appearance: matt, satin, gloss, grained, imitation skin, various colours, etc. - A tactile aspect (the "touch", the "hand")? Soft, supple, velvety, elastic, rubbery, waxy, oily, dry, hard, crunchy... - Do you need a specific effect or protection? Breathability, windproofing, stain-proofing, blackout, flame resistance, chemical protection, mechanical protection, etc. - A wide range of coating materials? PVC (phthalate-free), POLYURETHANE, ACRYLIC etc... We supply high-quality technical textiles used in sectors such as the automotive, aeronautical, marine, cosmetics, medical and furniture industries. Our fabrics guarantee optimum performance and exceptional reliability. What's more, our commitment to bio-based fabrics enables us to contribute to sustainable solutions.
Request for a quoteBCL INVENT
France
Our EasyGel Protect® coring solutions guarantee you a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). SPECIFICATIONS • Transparent core tube with decontaminable accessories and its equipment. BENEFITS • Cheap Solution
Request for a quoteMAFDEL
France
MAFDEL propose a choice of coatings to meet particular conveyance constraints: adherence, slippage, abrasion or temperature resistances… - Green PVC - Black rubber - Polyester felt - Aramid felt - Linatech - Parablond - Cellular foam - Sylomer foam - Rubber - Lycra It is also possible to provide embossed conveyor belts : - Non-slip studded - Sawtooth - SG3 - Diamond The embossing can be realized on all the range of conveyor belts, except DEL/ROC, with a maximum width of 380mm.
Request for a quoteResults for
Coatings - Import exportNumber of results
12 ProductsCountries
Company type