Bushings - Import export

We manufacture rough or fully machined bushing for gyratory crushers in 15% Leaded Bronze

We manufacture rough or fully machined bush and liner for rudder stock system in copper alloys or stainless steel

Discover our range of Bushings and washers for combine harvester and many other combine harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.

Housing hardened and black oxidised. Contact faces ground. Note: Locating bushes are placed in a fixture or interchangeable subplate and form the counterpart to the locating cylinder. The locating bushes are centred in a reamed hole and then fastened with 4 screws. The balls of the locating cylinder engage in the groove in the locating bush, thereby forming a fast, secure and highly accurate changeover unit, and reducing setup and changeover times. Attention: Please observe installation notes of the locating bushes.

These bushes are ideal for easy and quick positioning of ball lock pins and locking pins. Advantages: centred by the centring collar. easy and reliable installation. can be screwed into various materials. usable both sides

Selflubricating. Hardness 190220 HB. Note The guide bushes are radially and axially applicable. The bearing elements are maintenancefree and wearresistant. The graphite inserts provide lifelong lubrication. Preferably for travel speeds < 0.5 m/s. (Additional lubrication is recommended for extreme loading with a higher travel speeds). Temperature range Temporary temperature peaks up to ca. 200°C. Tolerances The bore for the bearings should correspond to ISO tolerance H7. The tolerance h6 to h7 is recommended for the shaft.

Hardened to 780 ±40 HV 10 and ground. Without leadin groove. Note All bushes have the bore size marked on the upper face, e.g. 10. Diameters D1 over 15 mm increase in size by 0.5 mm. Dowels or coiled spring pins together with DIN 1731 flathead screws can be used in place of the stop pin.

From diameter D1 over 15 mm size increases are 0.5 mm.

From diameter D1 over 15 mm size increases are 0.5 mm. 1) Chamfer for insert

Black thermoplastic. Steel grade 5.8 or stainless steel 1.4305. Version: Metal parts trivalent blue passivated steel or bright stainless steel. Note: Star grips with projecting steel bush and blind hole or female thread are especially suited for cross pinning. Drawing reference: Form H: bush with blind hole Form K: tapped bush Form L: external thread

These eccentric bushes can be used as e.g. stops or tolerance compensators. 1) DIN 332-1 centre bore, Form A 2) Basic form with centring 3) With scale groove for visual stop 4) Through hole 5) Tapped hole Advantages: Easy handling Grub screw clamping Minimal installation space Arbitrary mounting position Customised application Versatile use

Eccentric bushes enable lateral spring plungers to be precisely positioned with regard to the workpiece.

These centring clamps enable workpieces to be centred on and lightly clamped in a bore. The clamps have a wide expansion range. The series covers a bore range of Ø12 to Ø30 mm. To increase the centring accuracy the clamps with internal thread have a centring spigot (D2) for a locating hole. The centring accuracy is ±0.2 mm. Centring clamps with female threads fit on M6 grid systems (see illustration).

Exceptionally wearresistant Dimensionally stable even at high temperatures Electrically insulating Frequency neutral

The receiver bush is for quick and safe insertion of ball operated lifting pins. They offer an easy and reliable installation in a variety of lifting materials. Also for use with thin walled materials and blind holes. They are corrosion resistant with low wearing.

• Screws/Bushing and Inserts for automobile cam covers and other plastic modules • Rivet Nuts and Bolts, Threaded Inserts for fixing sheet metal • Automotive Turned Parts

For electric cylinders ISO 15552 size 32 to 100 Selfcentering rod coupling without axial play adapted to positioning Principle of rod coupling with reduced axial play Rod coupling with adjustable axial playThe difference with the ISO 15552 pneumatic cylinder guide units is at the level of the cylinder rod coupling on these guides for electric cylinders, the selfaligning rod coupling has no axial play (or a reduced axial play) depending on the assembly carried out, these units without axial play are therefore suitable for positioning applications. For applications without positioning accuracy or with high radial loads in static, it’s possible to use the guide units for pneumatic cylinders with a guide on plain bearings, since the rod coupling has an axial play (<0,2 mm). Guides for nonISO actuators For electric actuators which are not ISO, we know how to adapt our guide units to most of the rod actuators on the market see Hguide for actuators.

PARTS FOR INSTALLATION AND OPERATION ON HYDRAULIC NETWORKS cast iron universal coupling MAIN FEATURES - Body in ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Nominal pressure: 16 bar - For all types of pipe (PVC - PE - cast iron - steel) - Complies with standard EN 545 - A.C.S. certified product

We manufacture rough or fully machined pouring ladle bushes in high tensile brass

We manufacture rough or fully machined circuit breaker bush for electrical power plant in copper alloys or pure copper

We manufacture rough or fully machined guide bush in tin bronze

We manufacture rough or fully machined bush for transverse shaft in tin bronze

Lebronze alloys Group was born from the integration of different companies specializing in copper alloys, copper, nickel alloys, aluminium alloys, specialty steels, stainless steels, titanium and nickel superalloys. Thanks to a multidisciplinary know-how, the Group provides innovative solutions to all major industries such as Aerospace, Oil & Gas, Power, Railway but also in sectors manufacturing smaller equipment and products. Our 16 production facilities and 1,400 employees manage a unique range of metal processing technologies: continuous and semi-continuous casting, sand casting, die precision chill casting (manual, mechanized and automated), centrifugal casting, extrusion, ring rolling, hot and cold rolling, drawing, open-die forging, hot stamping, closed-die forging, cold forming, machining, non-destructive testing, etc.

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity High mechanical strength Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity Good fatigue and wear resistance High mechanical strength Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity Good fatigue and wear resistance High mechanical strength Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity High mechanical strength Good friction Excellent machinability