Alloys - Import export

Refrigeration bitube

Bundles

Copper tubes with chamfers

Copper parts

Tubes for heat exchangers

Metal sheets

Copper strips

Tubes in coil

Housing Form A plastic. Housing Form B die-cast zinc alloy. Active face POM. Housing Form C high-alloy stainless steel Version: Voltage: U = 10 – 30 V DC Function: Normally open Switch type: PNP Mounting type: flush Security type: IP 67 Note: Non-contact, functions wear-free with high switching frequency and accuracy. Non-sensitive to vibrations, dust and moisture. Inductive sensors record all metals without contact. Form C enables screw fastening in a T-slot. Is safe and saves space as the proximity switch lays flush in the slot. Short-circuit proof and reverse-polarity protected.

Square, rectangular copeer tubes

Tube boots, sanitary tubes

8 multi-diameter bypasses Copper for brazing: Black insulation: Black insulation BL-s3,d0 (M1) 13MM Bend: MSH85 only

HEADERs are perforated tubes for VRF (variable refrigerant flow) air conditioning systems. They centralise an assembly of bypasses. Minimum charge loss. Minimum brazings. They centralise an assembly of bypasses (only 1 inspection point).

Eid is the exclusive distributor of the REFNET® brand: Distribution unions for VRF variable refrigerant flow air-conditioning systems Saves time with multi-diameter inlets and outlets, to be cut as required. Minimum charge losses and minimum brazing. On request, we supply models that exactly meet your needs, whether following our recommendations, to drawings (block diagrams), or following manufacture of "Constructor Equivalence" kits. Some manufacturers specify an equal distribution of the fluids between outlet and bypass. The U body meets this requirement

Reducers and increasers are used to reduce or increase the diameter of one to three REFNET® sections

Reducers and increasers are used to reduce or increase the diameter of one to three REFNET® sections.

Eid is the exclusive distributor of the REFNET® brand: Distribution unions for VRF variable refrigerant flow air-conditioning systems Saves time with multi-diameter inlets and outlets, to be cut as required. Minimum charge losses and minimum brazing. On request, we supply models that exactly meet your needs, whether following our recommendations, to drawings (block diagrams), or following manufacture of "Constructor Equivalence" kits.

The disconnectable tubing makes the installation disconnectable. We manufacture tubing (2 gas-liquid lines), equipped with 4 disconnectable female unions, and we supply the 4 disconnectable male unions, that you will have to screw on the machine side. Work on a refrigeration circuit (connection / commissioning) should only be carried out by a technician holding a proficiency Certificate, details ART.543-78.)

Schrader valves for PE couplers Pressure gauge pick-off cap for PE couplers

Fluids R22 & R407 Seal-break couplers With copper tube 150mm-long to facilitate brazing Screw together, Male or Female 1/4 SAE With or without pressure gauge pick-off. Brass for brazing (PE).

Fluids R22 & R407 Seal-break couplers With copper tube 150mm-long to facilitate brazing Screw together, Male or Female 1/4 SAE With or without pressure gauge pick-off. Brass for brazing (PE)

Allows two precharged systems to be coupled when screwed together. Unions are tightened with two spanners, until the 2 seals, male and female, are broken.

Allows two precharged systems to be coupled when screwed together. Unions are tightened with two spanners, until the 2 seals, male and female, are broken.

Still wrongly referred to as precharged tubing, the “ready-to-use” tubing is simply tubing that is vacuum drawn. Prices may change It enables the two elements of a system to be connected, without having to vacuum redraw on the site and charge the tubing with gas. No action is required, according to the price of copper the line is ready to be installed and the air conditioning ready to operate. This product already exists in a basic version or as a complete kit (with condensate tube and electric cable). Any work on a refrigeration circuit (connection / commissioning) must be carried out by a technician holding a proficiency certificate. (detail ART.543-78.)

The PACK'CLIM is an easy “all in one” solution. Prices may change It contains everything needed to install an air conditioner in one box: Tubing, wall or floor bracket, cable and condensate tube, etc. according to the This complete kit saves a lot of time. Compatible with all refrigerant fluids.

The PACK'CLIM is an easy “all in one” solution. Prices may change It contains everything needed to install an air conditioner in one box: Tubing, wall or floor bracket, cable and condensate tube, etc. according to the This complete kit saves a lot of time. Compatible with all refrigerant fluids.

The PACK'CLIM is an easy “all in one” solution. Prices may change It contains everything needed to install an air conditioner in one box: Tubing, wall or floor bracket, cable and condensate tube, etc. according to the This complete kit saves a lot of time. Compatible with all refrigerant fluids.

or the service of installation technicians, eid exercises strict quality control on the copper, coils, bars, REFNET® refrigerant tubing. Here are a few explanations: THE TECHNICAL PROBLEM Technical performance of the air conditioning and refrigeration systems with the new refrigerant fluids (R410A, R32, etc.) is considerably reduced by the effect of the residual mineral oil used in the manufacture of ACR tubes ACR, used for heat exchangers and refrigerant tubing. THE SOLUTION Installing SUPERCLEAN tubes guarantees less residue inside the tubes. The internal residue ratio, defined as 0.1 mg/m, is only one sixtieth of that of conventional tubes. This means that there is no need for future cleaning of the exchangers and tubing, thus increasing the performance of the air conditioning and refrigeration systems. Our copper is manufactured using Grade A cathodes.

Industrial companies, System designers, Big tube consumers! It is estimated that, on average, more than 2 metres of offcuts are lost from a 20-metre reel! i.e. on average, more than 10% of each reel is lost… The solution? Large reels, containing from 100 metres to 400 metres, that can be stored, transported, unwound and easily cut, directly on the site. Eid can manufacture, as usual, any reel up to 1000 metres in bi-tube, if needed, but what we are offering here is "standard" large reels: The 100m coils are supplied conventionally (film-wrapped coils), the 300/400m lengths are supplied on wooden reels with a deposit (to be returned to eid) and retailing dispensers for those requiring them.