Results for
REP INTERNATIONAL
France
The Microject is a micromachine of a clamping force of 60 tons designed for the injection molding and overmolding of inserts used in small parts. Usability and flexibility. Plug and Produce! Characteristics MICROJECT LSR Maximum injection volume 3.77 (at 2000 bar) or 6.94 (at 1500 bar) or 10.37 (at 1000 bar). Clamping force 60 kN. Mould dimensions 150 x 100 mm. Overall dimensions 1.2 x 0.75 m. Simplicity and flexibility Installation in 30 minutes. Mould setting time optimally reduced. Intuitive touch screen interface.
Request for a quoteREP INTERNATIONAL
France
Lean range G10 Core The G10 is the 10th generation of REP injection molding machines. With its ergonomic design and intelligent onboard solutions, the G10 generation is branded "Infinitely Smart". The G10 is available in two versions, G10 Core (Lean range) and G10 Extended (Performance range), designed to better meet the varied needs of customers. Lean range G10 Core Vertical rubber injection molding machines REP ideal for less demanding processes. The G10 Core range exists with three clamping forces 1,600 kN 3,050 kN 5,100 kN.
Request for a quoteREP INTERNATIONAL
France
Performance range G10 Extended Intelligent, elegant and efficient The G10 is the 10th generation of REP injection molding machines. With its ergonomic design and intelligent onboard solutions, the G10 generation is branded "Infinitely Smart". The G10 is available in two versions, G10 Core (Lean range) and G10 Extended (Performance range), designed to better meet the varied needs of customers. The G10 Extended is a line of presses adapted to the most demanding processes. The G10 Extended is progressively replacing the G9 generation machines and ranges from 1,600 kN (V410) to 10,200 kN (V910).
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteREP INTERNATIONAL
France
Designed for the manufacture of highvoltage insulators (550 kV), this press is one of the largest presses made by REP. The dimensions of the parts to be injected explain the huge size of the press 660 mm in diameter, 2,600 mm long, moulded in one go. The production of a complete insulator is therefore performed in one or two cycles, thus significantly increasing the profitability and reliability of the parts. Machine features Closing force 24,000 kN Size of the platens 1,500 x 3,000 mm Injection volume 25,000 cm³ x 2 (2 injection units)
Request for a quoteREP INTERNATIONAL
France
The CMX (Compact Multi Station of the generation 10) This new machine replaces the former CMS generation and makes the third generation of rotary machines with 2 major innovations. Integration of the processcontrol system of the latest generation (generation 10) with all 4.0 functions. Product range with the CMX1 (160T clamping force) and the CMX2 (250T clamping force). New generation of 4station molding machines The REP solution for large productions with optimal efficiency 90% increase in productivity compared with a singlestation press. 68% increase in productivity compared with a press equipped with a double plate stripping kit. The CMX machine is available with two clamping forces 160T (CMX1) or 250T (CMX2).
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteREP INTERNATIONAL
France
CFrame Injection molding machine V19. Optimized floor space and maximum accessibility. The V19 is an advanced Cframe press of 400 kN available in 2 versions, plastic or rubber injection. Its accessibility from three sides makes it ideal for the injection molding of profiles and extruded hoses.
Request for a quoteREP INTERNATIONAL
France
URP Joint venture United Rubber Machinery Strategic Alliance for Asian injection molding machine market between REP and LWB Steinl,
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 500 kN. Size of the platens 300 x 300 mm. Injection volume 125 cm³.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 1,950 kN. Size of the platens 450 x 450 mm. Injection volume 1,000 cm³. The H49 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. An optimized cycle time. etc
Request for a quoteREP INTERNATIONAL
France
Type V410 Extended 1,600kN Machine features Clamping force 1,600 kN. Size of the platens 430 x 510 mm. Injection volume 1,000 cm³. Machine which is particularly used for the production of flat gaskets as used in fuel cell applications. This machine is available in our showroom « Area 111 » in Corbas (France) to perform your test runs for the injection molding of LSR parts.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 10,200 kN. Size of the platens 1,200 x 1,200 mm. Injection volume 5,000; 8,500 or 11,000 cm³. The G10 Extended range, performance for complex processes. Designed to better meet the various customer requirements with its embedded intelligent solutions. The G10 Extended range will progressively replace the G9 machines and extends from 1,600 kN (V410) to 10,200 kN (V910).
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 1,540 kN (station A) / 2 x 502 kN (station B & C). Size of the platens 510 x 360 x 55 mm. Injection volume 1,000 cm³; 2,000 cm³ or 5,000 cm³. The CMX (CompactMultiStation Generation X G10) is a 4station injection molding press 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces 1,540 kN (CMX1) or 2,544 kN (CMX2).
Request for a quoteREP INTERNATIONAL
France
V410 LSR Machine features Clamping force 1,600 kN. Size of the platens 430 x 510 mm. Injection volume 1,000 cm³. Machine which is particularly used for the production of flat gaskets as used in fuel cell applications. This machine is available in our showroom « Area 111 » in Corbas (France) to perform your test runs for the injection molding of LSR parts.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 2,544 kN (station A) / 2 x 785 kN (station B & C). Size of the platens 630 x 500 mm. Injection volume 1,000 cm³; 2,000 cm³ or 5,000 cm³. The CMX (CompactMultiStation Generation X G10) is a 4station injection molding press 1 injection station (A), 2 curing stations (B and C), 1 demolding station (D). The CMX machine is available with two clamping forces 1,540 kN (CMX1) or 2,544 kN (CMX2).
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 1,100 kN. Size of the platens 335 x 400 mm. Injection volume 400 or 1,000 cm³
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
REP INTERNATIONAL
France
Economic injection molding presses. A REP injection unit combined with a closing unit of a Tung Yu press. This combined technology offers openended options Separate extrusion and injection thanks to the "Y" type injection unit. 2 or 3stroke closing unit. Proportional closedloop temperature control. Optimized floor space and ergonomics thanks to its modular design.
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteREP INTERNATIONAL
France
The V310 is available as standard with a Y400 or Y1000 injection unit. It is distinguished by its very small footprint Machine features: - Clamping force: 1,100 kN. - Platen size: 335 x 400 mm. - Injection volume: 400 or 1000 cm³.
Request for a quoteREP INTERNATIONAL
France
Machine features: - Top closure. - Specific pressure 2,600 kg/cm². - Lower ejection battery.
Request for a quoteREP INTERNATIONAL
France
Characteristics of the machine : - Closing force: 2,000 kN. Available in double station, triple station or multi-station versions. Hot-cold process for carbon fiber or glass applications.Characteristics of the machine : - Closing force: 2,000 kN. Available in double station, triple station or multi-station versions. Hot-cold process for carbon fiber or glass applications.
Request for a quoteREP INTERNATIONAL
France
Machine features : - Closing force: 2,000 kN Application examples: connector technology, pharmaceutical closures.
Request for a quoteREP INTERNATIONAL
France
V79 : a model with innovative ergonomics : no pit for the press, no platform for the operator. This customized V79 is used for large volume bi-material injection with automatic loading and demolding.
Request for a quoteREP INTERNATIONAL
France
In order to be able to offer other alternatives, the REP offer is being expanded with localized, high-performance and economical solutions. Manufactured in China and India, our G9A and URP ranges are specially designed for the Asian market. The G9A range consists of : - V49A Clamping force 1600 kN. Size of the platens 430 x 510 mm. Injection volume 1000 cm³. - V59A Clamping force 2600 kN. Size of the platens 500 x 630 mm. Injection volume 1000 or 2000 or 5000 cm3 - S59A Clamping force 3000 kN. Size of the platens 560 x 780 mm. Injection volume 1000 or 2000 or 5000 cm3 - S709A -Clamping force 5100 kN. Size of the platens 630 x 800 mm. Injection volume 2000 or 5000 or 8500 or 11000 cm3
Request for a quoteREP INTERNATIONAL
France
Rep studies your solution REP answers questions that cannot be resolved using conventional techniques. An "advanced" competence accompanied by the guarantees of the REP GROUP! A team of engineers is at your disposal for the study and realization of presses for special applications. A REP solution for every problem! We are able to meet your most complex requirements
Request for a quoteREP INTERNATIONAL
France
Machine features Specific pressure 500 kg/cm². Dimensions of the heating platens 1500 x 1500 mm. Minimum mould closing speed 0.03 mm/sec.
Request for a quoteREP INTERNATIONAL
France
Particular features of the machine Different demolding possibilities the mold can be opened automatically, possible infeed/outfeed of the lower mould half or rail system. Upper and lower ejectors for the full kNockout of the molded parts. Adjustable inclination of the top platen. They are particularly suitable for moulding Orings, pharmaceutical stoppers, syringe plungers, and many other rubber parts. They are available in 2RT or 3RT series depending on the number of plates in the mould.
Request for a quoteREP INTERNATIONAL
France
Machine features Clamping force 2,600 kN. Size of the platens 500 x 630 mm (or 560 x 630 mm optional). Injection volume 1,000 or 2,000 or 5,000 cm³.
Request for a quoteResults for
Injection moulding machine - Import exportNumber of results
49 ProductsCountries
Company type