Lightweight - Import export

TECHNICAL DEFINITION CE 78 PERFECT’LISS is a ready-to-use lightweight compound specially formulated for finishing interior substrates (walls and ceilings). COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightening fillers, preservative and various admixtures. The compound is white. SUITABLE SURFACES Plasterboard, plaster, AAC, brick, fibreglass cloth, gypsum block, concrete, render, old paint. APPLICATION Roller, trowel or airless applications of the product are possible. For roller application, the product should be mixed before use. Nozzles recommended for airless application : 35 and 41. AMOUNT REQUIRED Depends on the thickness applied : from 0.4 to 2 kg/m². DRYING TIME The second coat can be applied 6-24 hours after the first, depending on the ambient conditions.

TECHNICAL DEFINITION CE 78 PERFECT’LIGHT is a lightweight ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightweight fillers, preservation agent and various adjuvants. The paste is white. COVERINGS. Plasterboard primer. Smoothing filler. REFERENCE DOCUMENTS • CE marking • DTU 25.41 and DTU 25.42 • NF EN 13963 • DoP PACK SIZE 20 kg buckets on covered pallet. STORAGE 12 months in original unopened packaging away from frost and high temperatures. APPLICATION Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.). Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then adding the tape Then add a finishing coat, allow to dry and finish to hide the tape. Also hide the screw heads. For projecting vertical edges, use reinforced tape.

COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightening fillers, preservatives and various adjuvants. The resulting paste is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Smoothing coating. TECHNICAL CHARACTERISTICS - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick - Density: 1.2 STORAGE 9 months in original unopened packaging, protected from frost and heat. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings). The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip in place. Then carry out a finishing pass, let dry and finish to mask the strip. For vertical protruding corners, use a reinforced strip or a metal angle iron.

TECHNICAL DEFINITION CE 78 PERFECT’LIGHT is a ready-to-use lightweight jointing compound specially formulated for tapered-edge plasterboards, to be used with joint tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightening fillers, preservative and various admixtures. The compound is white. SUITABLE SURFACES All types of tapered-edge, paper-lined plasterboard, with or without insulation. TECHNICAL CHARACTERISTICS • Tape adherence : > 1000 g • Cracking : no cracking up to a thickness of 5 mm APPLICATION Before treating the joints themselves, any gaps where the plasterboards are accidentally out of alignment must be filled, along with any other gaps Apply the product manually, spreading the diluted mixture for 10 or 15 cm with a coating knife before applying the tape (with the rough side against the coating). Then apply a finishing layer, leave to dry and finish to hide the tape and screw heads. In the event of projecting vertical angles, use reinforced tape.

Lightweight aluminium profile for weightoptimised constructions.

AXON'CABLE offer lightweight microwave coaxial cables: they are 30% lighter than the avionics WN standard. Light and thin, they exhibit excellent mechanical and electrical performance. Advantages Excellent attenuation values, 15 dB for 100 m at 1 GHz, Temperature rating: -55°C to +180°C, Characteristic impedance: 50 Ω, In accordance with EN 4604-009 avionics KW standards. Construction Axon' lightweight coaxial cables are made with: an aluminium conductor and a Celloflon® dielectric (expanded PTFE), a silver plated copper braided shield, a reinforced aluminium braided shield and a FEP outer jacket. Can be terminated with (up to 18 GHz): SMA plug, straight or swept 90° TNC plug, straight or swept 90° N plug, straight or swept 90° N jack, straight up to 12 GHz. Applications Aircrafts, Helicopters.

Centrifugally cast composite parts made up with a matrix in silicon-aluminum alloy and SiC reinforcement elements: Silicon Carbide particles. Characteristics of an ALUSiC® piece: - SiC reinforcement ratio ranging from 30 to 60% (in volume) depending on the application. - Perfect volume distribution of the SiC particles. Physical properties: - Low density (d ≤ 2.95). - Very low expansion coefficient (alpha < 8x10-6 with 60% SiC). - High thermal conductivity (> 150W/m/°K). Mechanical properties: - Very high stiffness (Proof stress > 185x10-6 N/mm² with 60% SiC). - Exceptional wear resistance. - Good mechanical properties under hot conditions (up to 300° C / 572° F). The non-reinforced zone has the characteristics of basic alloy.

Developed to meet the needs of small and even very small budgets, the COOL range has been developed around a range of 3 harmonious and dynamic colours. A compromise between a refined design and a selection of quality materials, the Cool range retains the essentials: a 60x60 aluminium post structure, 15 mm thick anti-slip HPL floors and stainless steel screws (single diameter, anti-theft and anti-vandalism system). It is available with several floor heights from 0.60 m to 1.20 m and from 1 to 4 towers. With its soft colours and classic lines, the COOL range provides qualitative playground solutions accessible to all customers.

Lightweight (3.9kg) and portable, the Model 50000 on battery is conceived for those areas where electrical supply is limited. Compact and multipurpose, the 50000 has the necessary accessories and power to clean up car interiors, small carpets, breadcrumbs, occasional liquid spills etc. 150W, 20V

USE : Quick Transporting of Operating Track Works Agents and Tools on Track. (over long distances) - All aluminium construction - Rubber tired Wheels with lateral guidage Rollers - Motorization unconnected by portable Impact Wrench S.1.P - Forward running and reverse by inversion of the portable Machine rotation. - Feed in function of the portable Machine rotation Speed (3-10 Km/H) - Load Capacities (See below Table) - Double Control Braking Device (Type "dead-man") * Manual Braking by dismountable Lever * Treadle Braking operated the Agent - Protection by lateral guards - Weights as the Platform Sizes (110 - 140 Kg) - Lateral Transport Handles Platform Sizes (cm) for Track Gauge 144 cm. Load Capacity (kg) Operating Agents Seats (on request) References 175 x 75 175 x 100 175 x 200 500 0 2 4 PM.10 PM.11 PM.12 175 x 75 175 x 100 175 x 200 1000 0 2 4 PM.20 PM.21 PM.22 175 x 75 175 x 100 175 x 200 1500 0 2 4 PM.30 PM.31 PM.32 175 x 240 2000 2 PM.41 OPTIONS : - Seats for Transporting of T

USE : Transport of all Equipments and Tools on Tracks over short distances. Load Capacity : 500 Kg to 2 Tons. AVANTAGES : Guaranted, Lightweight (aluminium) and Tough Equipments that offer Total Safety of use . Easy Crossing of Switches and Crossings. (Equipped with Wheels dia. 200 mm) Ref. Load Capacity (Kg) Parking Brake on 2 Wheels AUTOMATIC BRAKE Type "Dead-Man's" on Weight (Kg) 2 Wheels 4 Wheels PL1T PL2T 500 1000 x x 48 52 PL1S ( *) PL2S ( *) PL3S ( *) PL4S ( *) 500 1000 500 1000 x x x x 53 57 55 59 PL5S 2000 x 2 x 90 ( *) Approved by "SNCF" All our Platform Trolleys are equipped with BRAKING DEVICES and the 4 Wheels are electrically insulated. - 2 Operating Agents can drive the Platform Trolley with the 2 Lateral Handles. - Standard Dimensions (For 1.44 m. Track Gauge) : 175 x 75 cm. These Lightweight Platform Trolleys can be produced for all Track Gauges (to specify). OPTIONS : - Motorized PLATFORM TROLLEYS - References : PM-10 / PM-20 / PM-30 - Raised Transport Platform

USE : Renewal of rails and Crossings, (Lifting and Lining of Track). Loading and Unloading Switches and Crossings on Track Motor Car. ADVANTAGES : Highly Safety Equipment. Easily to carry and to transport . Horizontal Beams made from reinforced aluminium alloy. Hoists equipped with a safety brake. Steel Legs with Wheels and Handles for carrying on rails. Length Horizontal Beam (m) Lifting Capacity Kg) Quantities Ref. Hoist Control Weight Gantry Crane alone (kg) Fixed Leg Adjust. Leg Hoist and Tong 1.2 990 1 1 1 559/1 Crank Handle 49 Small 1.8 990 990 1 1 2 1 1 560/2 560/23 Crank Handle Crank Handle 75 86 Medium 3 1600 1980 1600 1980 2 2 2 2 1 2 1 2 560/3 560/31 560/32 560/33 Crank Handle Crank Handle with Chain with Chain 120 Large ( *) 3.5 3200 2 2 560/34 with Chain 130 Super-large SNCF AGREEMENTS Agreed Models Nos. Agreements 560/2 and 560/23 IMT 07131 560/3 IMT 07132 OPTIONS : - ( * ) The Ref. 560/34 with Pivoting Transport Wheels Device allowing to circulate on auxiliary la

USE : Lifting of the rail for various purposes. Lifting and lining of the track. ADVANTAGES : Lightweight and durable Equipment (all-aluminium construction) - Reinforced Aluminium Body - Aluminium Legs with handles - Lifting Stroke = 55 cm - Footing = 45 cm - Lifting Capacity = 990 Kg / 1000 Kg - Chain Hoist with Safety retaining brake and standard Rail Tong - Weight = 23 Kg (with full Hoist) - Reference : 560/6 OPTIONS : - Lifting Capacity 2000 Kg - Ref. 560/7 - Tong for Tramway (Grooved rail) - Ref. 662-T - Tong with Rollers for moving the rail - Ref. 61

USE : Transport of all Equipments and Tools on Tracks over short distances. Load Capacity : 500 Kg to 2 Tons. AVANTAGES : Guaranted, Lightweight (aluminium) and Tough Equipments that offer Total Safety of use . Easy Crossing of Switches and Crossings. (Equipped with Wheels dia. 200 mm) Ref. Load Capacity (Kg) Parking Brake on 2 Wheels AUTOMATIC BRAKE Type "Dead-Man's" on Weight (Kg) 2 Wheels 4 Wheels PL1T PL2T 500 1000 x x 48 52 PL1S ( *) PL2S ( *) PL3S ( *) PL4S ( *) 500 1000 500 1000 x x x x 53 57 55 59 PL5S 2000 x 2 x 90 ( *) Approved by "SNCF" All our Platform Trolleys are equipped with BRAKING DEVICES and the 4 Wheels are electrically insulated. - 2 Operating Agents can drive the Platform Trolley with the 2 Lateral Handles. - Standard Dimensions (For 1.44 m. Track Gauge) : 175 x 75 cm. These Lightweight Platform Trolleys can be produced for all Track Gauges (to specify). OPTIONS : - Motorized PLATFORM TROLLEYS - References : PM-10 / PM-20 / PM-30 - Raised Transport Platform