Interior finishing - Import export

A floor reading lamp with a soft elegant shape providing mixed lighting, which fits in very well with all classical interiors. Different finishes available Works with any type of bulb

Supported on a conical shaft, this is a glowing superimposition of cut glass slabs, holding a bronze bowl, on which rests an optical glass bowl. This model was created in 1938 and fits perfectly in numerous interiors. Different finishes available Works with any type of bulb

Square ceiling light The delicacy of the rough laid glass slabs set between two bronze mountings led it to being called the “queen’s necklace”. These round or square-shaped ceiling lights are suitable for both classical and modern interiors. Different finishes and sizes available Works with any type of bulb

The delicacy of the rough laid glass slabs set between two bronze mountings led it to being called the “queen’s necklace”. These round or square-shaped ceiling lights are suitable for both classical and modern interiors. Different finishes and sizes available. Rods height as requested. Works with any type of bulb

The delicacy of the rough laid glass slabs set between two bronze mountings led it to being called the “queen’s necklace”. These round or square-shaped ceiling lights are suitable for both classical and modern interiors. Different finishes and sizes available Works with any type of bulb

The delicacy of the rough laid glass slabs set between two bronze mountings led it to being called the “queen’s necklace”. These round or square-shaped ceiling lights are suitable for both classical and modern interiors. Different finishes and diameters available. Rods height as requested. Works with any type of bulb

The delicacy of the rough laid glass slabs set between two bronze mountings led it to being called the “queen’s necklace”. These round or square-shaped ceiling lights are suitable for both classical and modern interiors. Different finishes and diameters available Works with any type of bulb

The delicacy of the rough laid glass slabs set between two bronze mountings led it to being called the “queen’s necklace”. These round or square-shaped ceiling lights are suitable for both classical and modern interiors. Different finishes and diameters available Works with any type of bulb

TECHNICAL DETAILS Paste coating for a good finish on interior walls and ceilings. Provides excellent surface preparation before painting or hanging coverings. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, rheological agent and various additives. SEMIN ENDUIT DE LISSAGE is a water-based coating. The paste is white in colour. COVERINGS • Wallpaper • Paint • Wall covering SUITABLE SURFACES Interior walls and ceilings • Plasterboards • Plaster tiles • Concrete • Cement coating TECHNICAL CHARACTERISTICS • Density of paste : 1.9 • Granulometry : fine • pH : 7 Adhesion : complies with NFT 30 608 PACK SIZE 4 and 10 kg buckets on shrink-wrapped pallet. APPLICATION Apply manually using a smoothing trowel or a filling knife. The maximum thickness will be 2 mm per coat. Allow to harden and remove imperfections before sanding, if necessary. Print the SEMIN ENDUIT DE LISSAGE if applying satin-finish or gloss paint. Clean tools in water.

TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.

TECHNICAL DEFINITION Interior finishing plaster. Can be used with Airless spray. It provides a fine, uniform and even finish and is easy to sand. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. The resulting paste is off-white in colour. COVERINGS Primer coat, paint, wall coverings. TECHNICAL PROPERTIES • Density : 1.8 • Dry extract : 73% STORAGE 18 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES. Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. Scrape, brush and remove dust from concrete, plasterboard and plaster tiles. APPLICATION Manual application : With a trowel or filling knife. Mechanical application : Airless and spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 80 cm from the substrate.

TECHNICAL DETAILS Interior ready-to-use smooth finish coating, easy to apply - requires less sanding down than a traditional coating and therefore creates less dust. Apply with spatula, then sand down. Less dust is created, and the dust is less volatile. SUITABLE SURFACES Interior walls and ceiling : plasterboards, gypsum blocks, concrete, cement coating, aerated concrete, sealants. REFERENCE DOCUMENTS DTU 59.1. PACK SIZE 25 kg bucket. AFNOR NFT 36.005 AMOUNT REQUIRED From 0.6 to 1 kg/m² depending on quality of surface. DRYING TIME 6 to 24 hours depending on conditions and quantity applied. RECOMMENDED APPLICATION To avoid all traces of filler, finish with a slightly rounded action.

TECHNICAL DEFINITION Ready mixed filler for interior and exterior finishing work on walls and ceilings OSCAR is a water based filler giving a finish identical to oil based products. COMPOSITION AND APPEARANCE Resin emulsion containing calcium carbonate, rheological agent and various additives. The resulting paste is white. ACCEPTED SUBSTRATES Interior walls and ceilings • Plasterboard • Old paint • Plaster blocks • Primers Outside walls • Smooth concrete • Fine floated cement SUITABLE SURFACES • Wallpaper • Paint • Wall coverings • Thick plastic covering (RPE) TECHNICAL CHARACTERISTICS • Paste density : 1.9 • Particle size : very fine • pH : 7 APPLICATION Application is manual using a float or a painter’s knife. The maximum thickness will be 1 mm per coat. Smooth and sand if necessary before OSCAR has entirely set. Clean tools with water.

TECHNICAL DEFINITION CE 78 PERFECT’LISS is a ready-to-use lightweight compound specially formulated for finishing interior substrates (walls and ceilings). COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightening fillers, preservative and various admixtures. The compound is white. SUITABLE SURFACES Plasterboard, plaster, AAC, brick, fibreglass cloth, gypsum block, concrete, render, old paint. APPLICATION Roller, trowel or airless applications of the product are possible. For roller application, the product should be mixed before use. Nozzles recommended for airless application : 35 and 41. AMOUNT REQUIRED Depends on the thickness applied : from 0.4 to 2 kg/m². DRYING TIME The second coat can be applied 6-24 hours after the first, depending on the ambient conditions.

Model SBPA1000D Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 1.5 mm Automated TIG welding process Hot galvanized steel chassis Chassis graspable by forklift and pallet truck Complete pneumatic float Total drain with 40 MACON stainless steel ball valve Nameplate

304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank COR700D Model Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 1.5 mm Automated TIG welding process Plastic handle for displacement 3 wheels diam. 100 mm Stainless steel dust cover Total drain with 40 Macon stainless steel ball valve Nameplate

304 stainless steel tank Model SPABP600 With pneumatic system On feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPA600 model With pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system on welded feet Model SPABP500 Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

Cold Rolled Stainless Steel Tank Brushed exterior finish Interior finish BA Pickled and passivated welds Cold stamped bottoms with optimized profile thickness 2 mm Automated TIG welding process Hole for agitator included Ø 120 mm (optional agitator) Lid with handle for semi opening Total drain with stainless steel ball valve 51 SMS 4 stainless steel welded feet Name plate

304 stainless steel tank SPABP400A model With pneumatic system Capacity 405 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

Model COR330D 304 stainless steel tank Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 1.5 mm Automated TIG welding process Plastic handle for displacement 3 wheels Ø 100 mm Stainless steel dust cover Total drain with 40 Macon stainless steel ball valve Nameplate

Model SPABP300 304 tank with pneumatic system On welded feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon

304 stainless steel tank COR200D model Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 1.5 mm Automated TIG welding processa Plastic handle for displacement 3 wheels Ø 100 mm Stainless steel dust cover Total drain with 40 MACON stainless steel ball valve Nameplate

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

304 stainless steel tank Model COR130D Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 1.5 mm Automated TIG welding process Plastic handle for displacement 3 wheels diam. 100 mm Stainless steel dust cover Total drain with 40 Macon stainless steel ball valve Nameplate

SPA100A model Flat bottom tank With pneumatic system Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap