Guide rail - Import export

Profile guide rails can be screwed on from above. The profile guide rails are available in four sizes and one or more carriages can be assembled on them. 4row versions with round arch profile. The tracks of the profile guide rails are set below an angle of 45° and thus can carry loads from all directions. The profile guide rails correspond to the market standard and can replace linear guides of the same design by other manufacturers. On request Lengths up to a max. 3960 mm.

Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge

Electro zincplated. Tracks inductively hardened and ground. Note for ordering Fastening screws are supplied. Note Compact Cprofile guide rails with internal hardened tracks. The system runs with low noise even under heavy loads. There is play between the screw and the fastening hole to allow the rail to be aligned during installation. To achieve the desired running properties there must always be a film of lubricant between track and roller, this also provides corrosion protection for the ground tracks. On request Lengths up to max. 4080 mm.

Housing steel. Clamping lever plastic. Threaded spindle grade 12.9. Version Housing nickelplated. Clamping lever, spindle black oxidised. Note Manually operated clamping elements for static clamping tasks. Manual clamping process using the freely adjustable clamping lever. The floating clamp ensure symmetrical application of force onto the rail. Up to 50,000 static clamping cycles (B10d value). In general, a friction connection is created between the clamping element and the the linear guide on the open faces of the profile guide rail so that the ball guide tracks are not damaged. The retaining force is tested on an oil smeared profile guide rail. An adapter plate, dependent on the type of carriage used, is required for height adjustment.

Race body steel. Wipers plastic/felt. Longitudinal sealing lips rubber. Rollers steel 1.3505. Note Roller carriage with lifetimelubrication roller bearings and wipers which lubricate the system when moving. By simply moving the centre cam roller, the roller carriage can be adjusted so that it is free of play or has the desired pretension in the rail. High travel speeds up to 7 m/s and extremely quiet (faster and quieter than systems that use recirculating balls). The wipers are fitted with an oilsoaked felt. This felt is in constant contact with the track to ensure perfect lubrication. The felts can be recharged using an oil pump through the lubrication points on the front. On request Roller carriages with 4 or 5 rollers.

Extruded section, aluminium EN AW6060. Version Hard anodised aluminium, 50 µm. Hardness 500 HV. Note The aluminium guide rail has good thermal conductivity and importantly heats only at continuously very high speeds. ** lengths L2 = 20 mm * and L = 500 mm included L2 and L only available in full mm.

Body, extruded aluminium section. Bearing housing and slide, aluminium. Profile guide rail and guide carriage, steel. Toothed belt, polyurethane with steel cord reinforcement. Version Body natural colour anodised Bearing housing and slide, black anodised. Tracks of the profile guide rail, inductively hardened and ground. Note Compact and flexible linear actuators with toothed belt drive. The body consists of a selfsupporting aluminium extruded section with integrated profile guide rail. This rail system is able to absorb highest forces from all directions, is lowwear, and is optimised for moving large masses. Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper Tslot. The aluminium profile is fully compatible with our standard I series profiles.

Carriage body zinc. Plastic bearing material iglidur® J. Rails anodised aluminium. Version Body chromed. Guide rail natural colour anodised. Note Miniature slide guides are maintenancefree and corrosion resistant. Very high speeds and accelerations are possible due to the low weight. Applicable temperature max. 80 °C. Miniature slide guides are insensitive to dust and are ideal for dry running. ** length L2 = 30 mm and * L = 1000 mm included L2 and L only available in full mm.

Sliding carriage Base structure in extruded section, aluminium EN AW6060. Sliding elements Maintenance free plain bearing iglidur® J. Version Eloxalcoated E6/EV1. Black thermoplastic Note With a low rate of inerita, high accelerations and short term extreme speeds up to 30 m/s are possible. DryLin® T linear glide guides are resistant to dirt and corrosion and are adjustable, maintenancefree and quiet. Application temperature max. 80 °C. As no lubricants are used they are recommended for use in food, medical, and clean room technologies. Manual clamping was developed for simple functions. Polymer under constant pressure has a tendency to creep which causes a decrease in clamping force over time (up to 70%), which means that no safetyrelevant parts should be clamped. Suitable guide rails see 21200. Drawing reference 1) manual clamping

QUIET DPM MACHINE Scribing technology makes sense as a metal marking machine, for metal parts (tubes and pipes) or formed plate (chassis and body parts) which will naturally resonate during dot peen marking. Scribing, by reducing the number of impacts, will allow a smooth and near silent marking with high contrast, making it easier to proofread. Thanks to the Datamatrix kit, we offer you the possibility to switch to a dot peen mode when you need to mark a 2D code. QUALITY SCRIBING MACHINE Designed to combine depth with aesthetic results, speed, strength and position can be configured for perfect direct part marking consistency and legibility meaning a high possibility to survive the painting process. This gives the highest quality characters with the existing fonts. STRONG & DURABLE INDUSTRIAL MARKER Composed of high rigidity guide rails and high-performance styluses. high amplitude, anti-burrs, and a diamond tip.

HIGH-PERFORMANCE With automatic density adjustment to maximize marking speed and readability, automatic part detection and multi-level marking the XF510m performs at its best constantly. Fitted with multi-dot technology making it possible to carry out deeper markings, it becomes your go-to solution for direct part marking. RELIABLE & DURABLE Utilizing high precision zero-play ball screws, high rigidity guide rails, and integrated cooling the XF510m is designed to be bold and run problem-free in the most demanding of environments. DOT PEEN MARKER Mark any type of 2D code, Data Matrix, QR code engraving, UID, GS1, Unicode characters safe in the knowledge that our ultra-precise M1L stylus will be providing unparalleled accuracy. Also use for aluminum plate engraving, steel engraving, VIN plate engraving, and as your favorite metal marking machine.

Faster, endowed with a stiffened frame and gantry, equipped with more powerful spindles, the MECA EASY will meet your most demanding productions in 2D as in 3D Refer to the exemples of applications : PVC signboard Health case or box Cases and boxes Plastics machining Side windows Aircraft interior furnishing Jewels engraving Masks Household appliances Lights The strengths • Mono-bloc frame in high inertia welded steel and mobile gantry in steel.
 • Milling speed up to 18m/min • Plate : fixed table made of wide section of aluminium profiles . • Guiding by grinded rails and preloaded circulation ball bearings. • Transmission by accuracy ball screw on the 3 axes. • CN7000 digital monitoring with colour touch screen and motorization by brush-less servo-motors.
 • A range of 8 formats for the versatility.
 • Z 350 option for the 3D applications. 
• Quality and performances matched to the production.
 • The simplicity of use 
• Compliant with the European safety directives.
 • Many...

Designed for fine, precise, intensive works in small formats, the CharlyDMCII milling machines are used for many applications: metal engraving, fine machining, plasturgy, design, rapid prototyping, electronics… STRENGTHS • Rigid steel/cast aluminium structure. • Double guide grinded steel prismatic rails and preloaded ball beatings. • Transmission by ball screws. • Fixed table / mobile gantry kinematics • Available in servo-brushless motorization. • Economical version with step by step motorization. • Design and ergonomy. • Small footprint. • Available with automatic tool change. • Very high frequency spindle for machining and fine works. • Parts held by vacuum table (option). • ISO programming, industry standard. • Machining of soft materials and metals. • Quality and industrial performances of Charlyrobot machines. • Compliant with European safety directive Machine 2006/42/CE. Models DMCII 301/303 DMCII 601/603 DMCII 6121/6123 X stroke 310 mm 610 mm 610 mm Y stroke (without...

The rigour and the accuracy for the industrial works, the polyvalence and the simplicity for a maximum of profitability. Designed for the accurate and intensive works, they allow a wide field of applications : metal engraving, fine millings, design, prototyping Refer to the exemples of applications : Moulds and models Health case or box Side windows Aircraft interior furnishing Jewels engraving Masks Household appliances Lights Furniture Aluminium frames The strengths • XYZ stroke 310 x 430 x 120 mm (DMC300) - "Y" reduced to 250 mm in case of automatic tool changer.
 • XYZ stroke 600 x 610 x 120 mm (DMC600) - "Y" reduced to 420 mm in case of automatic tool changer. • Rigid structure made of steel / Aluminium foundry.
 • Double guiding by prismatic rails in grinded steel with re-circulating ball bearings.
 • Ball screw with pre-stressed sockets. • Cinematics fixed table / mobile gantry.
 • Available in « servo-brushless » motorization.
 • Economical version with stepper...

Thanks to their simplicity of use, to their amazingly fine milling results and to their wide surface of milling, the charly4U/2U are a reference in their field with their capacity to mill metals such as aluminium, brass, for a limited budget Refer to the exemples of applications : Jewels engraving Masks Household appliances Lights Furniture Aluminium frames Plastics and PVC frames Marking Jewels creation Podiatry and orthopedics The strengths • Performance and dynamics of the millings. 
• XYZ stroke 310 x 220 x 160 mm (charly4U).
 • XYZ stroke XYZ 600 x 420 x 280 mm (charly2U).
 • Structure made of very rigid steel.
 • Double guiding by prismatic rails in grinded steel with re-circulating ball bearings.
 • Integrated greaser on each axis.
 • Interpolation 3 dynamic axes.
 • Easy, fast and reliable tool change and point-zero pickup, thanks to the tool sensor.
 • Design and ergonomics. 
• 180° visibility. 
• Lighting : integrated halogen. 
• Installation, taking over and...

Compact 22.5 mm format Six Class A EN 50205 power contacts Removable terminals Cycle before dangerous failure: B10d=100,000 at 5A Max. closing time for NO contact: < 15ms (rebounds included) Duration of rebounds for NO contact: < 4ms Max. closing time for NF contact: < 16ms (rebounds included) Duration of rebounds for NF contact: < 13ms Protection severing wires: yes (opening of NO contacts) Safety contacts: 4x NO 8A/250V / 2x NF 8A/250V Indicators: 2 LEDs Reset: automatic Mounting: symmetrical DIN 35mm rail on DIN 50022 Mounting: IP 54 electrical box Electrical connection: Maximum 14 AWG (2.08 mm²) / 250V minimum Temperature: -20°C to +60°C

This Machine allows the Grinding of the Rail Corrugation (The Guiding Database being the up-running Surface of the Waves Rails). It is equipped with Different Ø Cup Grinding Wheels, as the type rail to grind. ENGINE : - HONDA 4-stroke Petrol Engine - Type GXV-160 - Displacement 163 cm³ - 4.3 HP (3.2 W) GUIDING ON RAILS : - 2 Ramps equipped with 12 Rollers each, mounted on Water-Tight Ball Bearings, circulating on the Running Surface of rail to grind. - 4-Side Guide Rollers on the Internal Sides of rails. GRINDING ADJUSTMENT : - Inclination Adjustment of the Grinding Wheel on the Transversal Bar-Guiding. - Depth Adjustment of the Grinding by a Driving and Screw Control on one of the both Guiding Ramps. TOTAL NET WEIGHT : - 58 Kg (Complete Machine) GRINDER Type Ø Cup Wheel (mm) N-16-A N-16-B N-16-C N-16-D (Tramway Gauge) 52 mm 72 mm 115 mm 150 mm