Flexibility - Import export

Provides the product transfer from a piece of equipment located upstream to a piece of equipment located downstream. Can be adapted according to your needs and capacities.

Flexible tube for tinplate jug

Brass filter for flexible spout

Seal for flexible spout

FlowJam T is a sensor for monitoring the flow of solids that are conveyed through thin pipelines. The sensor can be used for tubes made of electrically nonconductive material, such as plastic or rubber, with outside diameters between 4 and 25 mm. • mounted around the tube • triboelectric measurement • free crosssection • easy retrofitting

Cutting after tubes filling N°1 - Blade N°2 - Counter blad

CUTTING AFTER TUBES FILLING TYPE OF MACHINES : UNIPAC, TONAZZI, KALIX, AXIOMATIC, ... On your tube fillers lines, once tubes filled and sealed, they are cut using a knife and a counter knife. N°1 Counter knife UNIPAC N°2 Knife UNIPAC N°3 Moving blade TONAZZI N°4 Fixed knife TONAZZI N°5 AXIOMATIC cutting die

NBR flexible impeller pump for diesel and oils Trolley: vertical Suction kit: foot valve, cam fittings and 3 metres of hose Discharge kit: cam fittings and 3 metres of hose, spout Voltage: single-phase 230 Volts Max. TDH: 15 metres Voltage: single-phase 230 Volts Power: 0.25 kW (FiLTRO-JEP40), 0.55 kW (FiLTRO-JEP80) Orifices: 1" (JEP040), 1"1/2 (JEP080) Hose Ø: 25 millimetres (FiLTRO-JEP40), 40 millimetres (FiLTRO-JEP80) Flow rate: 2.1 m3/h (JEP040), 4.8 m3/h (JEP080)

Body: cast iron Mechanism: zamak Waterproofing: by nitrile O-ring (not suitable for water)

Body: cast iron Mechanism: brass Waterproofing: by nitrile O-ring. NBR flange O-ring

Body: cast iron Mechanism: brass Waterproofing: by graphite braid. NBR flange O-ring, Viton® or PTFE seal as an option

TECHNICAL DEFINITION FIBRELASTIC is a ready-to-use filler paste with a high proportion of resin and glass fibre. Particularly suitable for all types of interior and exterior filling jobs. It has permanent flexibility allowing it to tolerate flexing of the substrate without cracking and it eliminates the need for repair tape. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, fibreglass and various additives. The paste is off-white. ACCEPTED SUBSTRATES • Plaster • Masonry • Cellular concrete • Wood • Cement render • Plasterboard • Roughcast • Old painted surfaces • Concrete • Silico-limestone brick SUITABLE SURFACES Once it has dried entirely FIBRELASTIC can be covered with any type of paint or plaster base or ready-to-use fillers. TECHNICAL CHARACTERISTICS • Viscosity (BV 1000 / 30 rpm) : 300000 mPas • Density : 1.3 • pH : 6 • Permanent elasticity PACK SIZE Tubes containing 300 g. Tubs containing 1.5 and 5 kg.

Mannequins Shopping is a European specialist in shopfitting and store equipment, counters, showcases windows, display cabinet, gondolas, podiums, in men mannequins, bustform and torso, lighting for retail stores such as lamps, spots also security systems, cash registers, the hangers, racks, professional clothing rails. Here you will find our flexible kid display mannequins and our design articulated kids mannequins and bustorm for retail stores.

Flexible male mannequin in black EPP (polypropilene foam) with interchangeable egg head and cap black adjustable base 280x380 mm. Height 186 cm Bust 104 cm Shoulder width 48 cm Waist 86 cm, Shoulder circumference 118 cm Hips of 103 cm.

Louison Industries manufactures made-to-measure cords, offering a wide range of solutions for a variety of sectors. Thanks to our in-depth expertise, we design and manufacture high-quality cords to meet the specific requirements of each industry: Solutions for luxury packaging: Elegant and resistant cords to enhance your luxury products and strengthen the customer experience. Military cords: robust and reliable cords for demanding military applications, guaranteeing optimum performance in the most demanding environments. Diameter: 1 to 10 mm thick Texture: Flat, round, rigid or elastic - traditional or technical. Composition: All types of materials (Polyester, Polyamide, Polypropylene, Cotton, Aramid and Para-Aramid (Nomex®, Kevlar®, Trevira®, Dyneema®, etc.), Glass fibre, Recycled materials...) Treatment: M1 fire-resistant/hydro-repellent coating/UV resistance, etc. Dyeing: Wide range of colours

Textile overmoulding has a wide range of applications in various industrial sectors. Our customers in the automotive, electronics, sports, medical and other sectors benefit from our expertise in textile overmoulding to design bespoke parts to meet their specific needs. In the automotive sector: it improves occupant comfort by providing a softer feel. It can also improve soundproofing and thermal insulation. Discover the overmoulded part, a mechanical link between two parts, a textile support and an injected plastic part, in a permanent manner. Overmoulding offers a number of advantages: No gluing stage in the manufacturing process High design flexibility Prevents components from coming loose Production of multi-material components Improved resistance to shock and vibration Improved strength and structure of parts

Complete and flexible measuring element to facilitate on-site installationMounting of the primary element between flanges: ISO PN 2.5 to PN 420, ASME 150 # to 2500 #, others on consultation. Solder (BW) or flanged connection Material: Standard: carbon steel, stainless steel, others according to your application.THE FLOWMETER INCLUDES: the desired orifice (orifice plate, nozzle) the flanges to fix the orifice upstream and downstream straight lengths in accordance with the chosen standard ASSEMBLY AND ASSEMBLY DATA: The design, manufacture and assembly are carried out in our workshops in compliance with the standards (upstream and downstream pipe roughness, centering of the primary element, circularity of the piping, upstream and downstream straight lengths) in order to achieve optimal measurement accuracy. CHARACTERISTICS : orifice plate - see corresponding technical data sheet nozzle - see corresponding technical data sheet upstream, downtrseam straight lengths

Low width flexible flat cables, Picoline®, are made with flat copper conductors insulated with a polyester tape. They have been designed for airbag rotary connectors used to release the driver’s airbag housed under the steering wheel. They have the following advantages: reduced friction due to round external profile, less noise in the cassette. They can be punched to facilitate positioning Picoline® can be overmoulded. Picoline® low width flexible flat cables are mainly used for automotive applications.

Axomove® is a range of round composite cables specially designed for robotic technology applications. They are able to meet the most demanding requirements of the automation technology. The main characteristics are as follows : good flexlife and resistance to torsion, small dimensions, small bend radius, resistance to oil and solvents, abrasion resistance, EMI protection. Depending on customer requirements, they can be composed of round or flat primary wires or both Insulation : FEP, PTFE, ETFE, PFA, polyimide, vitax™ , PU, ... Shielding for EMI protection when required

Severe operating conditions in very limited spaces may create demanding routings for the wires and cables with very small bend radius. Axon' offers a range of highly flexible multi-conductor wires and cables called Flexible Wires (FW). Made with silver plated copper and silver plated copper alloy (120,50 and 25 µm strands), they are insulated with FEP. They are designed to resist temperatures from -60°C to +150°C Various configurations are offered including : twisted pairs, shielded versions. Flexible wires can be integrated in large bundles of wires

Axostrip® is a range of flat cables with round pins which can be soldered or inserted to achieve board to board interconnections. They are made with tin plated copper conductors insulated with polyester or polyimide. These Round-end Flat Cables (RFC) are characterized by their high resistance to bending and vibration. Their insertion is fast and easy.

Bulk flat flexible cables flexlink® are made with flat conductors insulated with polyester film for any application where space reduction and flexibility are the most important criteria. Bulk flat flexible cables are compatible with the most commonly used crimp contacts. They are flexible and allows for space saving. They are made with 1.27 mm and 2.54 mm pitch flat copper conductors insulated with polyester films. They can be used in consumer electronics (printers, computers, …), automotive (switch rotary connectors, headliners, door panels, …)

Flexforce™ power cables are flexible composite cables designed for applications where high currents have to be carried. Their main advantages are as follows: high current carrying capacity, very good resistance to cut-through, to high temperature (150 C°). Possibility of shielding for excellent EMI protection. Resistance to fluids (hydraulic liquid, mineral oil, gasoline, diesel). Flexforce flexible power cables are made up of extra-flexible tin plated copper conductors insulated with FEP or Axon's special high temperature thermoplastic ASC15 and including separating tapes.

Capture and retention of all dusts at the source. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). Each gel, specifically developed according to its application, allow you to reduce dusting. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel BENEFITS • Cheap Solution • Easy to use • Reproducible operating mode • Clean Site

Our EasyGel Protect® ground detachment solutions guarantee you a dust <5f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…) . Each gel is developed specifically according to its application. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel BENEFITS

Capture and retention of all dusts at the source. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). Each gel, specifically developed according to its application, allow you to reduce dusting. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel BENEFITS • Solution économique • Simplicité de mise en oeuvre • Mode opératoire reproductible • Permet de réduire l’empoussièrement

Our EasyGel Protect® ground detachment solutions guarantee you a dust <5f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…) . Each gel is developed specifically according to its application. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel BENEFITS

Capture and retention of all dusts at the source. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). Each gel, specifically developed according to its application, allow you to reduce dusting. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel • Sampling method that does not alter laboratory analyzes.

The FX 50 is specifically designed to weld LARGE Flexible reinforced tubing. This machine will weld reinforcement to tubes from a 15 inch diameter to any diameter necessary. The FX 50 can also add a wear strip to the outside