Flat steel - Import export

Flat Steel Toe

Flat Washers (Flat) Stainless Steel A2 - DIN 433

Volume: 67 m 3 Surface area: 26 m 2 Structure: Corten and fully welded stainless steel Floor: Flat aluminum / T-shaped aluminum rail Insulation: 70 mm polyurethane Fork passage: no fork passage Gas: new R134A Power required: 12 KW Electric supply: 380V TRI Connection socket: 3 p + earth 32A Temperature: -25°C to +25°C Door opening : 270° Weight: 4,650 kg Maximum loading weight: 29,350 kg Number of European pallets: 23.

The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The floating joint unit is mainly used when: a temperature change alters the dimensions of a component assembly inaccuracies occur manufacturing tolerances must be compensated for the position of the components varies due to dynamic loads

Self-locking trapezoidal thread, spindle has end lock. Note: The through hole allows easy clamping and positioning of the workpiece. Drawing reference: 1) centring hole for 02210

304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank SPA700 model Pneumatic system Capacity 696 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank SPABP400A model With pneumatic system Capacity 405 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

SPA100A model Flat bottom tank With pneumatic system Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

TECHNICAL SPECIFICATIONS - 304 stainless steel tank - SPAIP SER 2300 model - Effective capacity: 2297 litres - 304 stainless steel wine rack - Flat bottom with 4 % slope - Bottom thickness : 2.0 mm - shell : 1.5 mm - Floating cap in 316L stainless steel - Complete pneumatic system - Swivel arm with stainless steel handle - Winch for lifting the floating cap - 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable - Rectangular door 420x530 mm flush with bottom of shell - Swivel bracket with stainless steel handle - Cooling coil with 4 rings on the shell - 2 additional cooling rings on the door - Sensor pocket positioned at the rear of the tank - Clock thermometer with immersion sleeve DIMENSIONS - Diameter 1400 mm - Height (shell) 1500 mm - Height (total) 2600 mm (with bracket) - Height of bowl + feet (500 mm): 2000 mm (without support)

Vertical cylindrical on feet Eccentric conical dome Conical bottom slope 38 % Interior and exterior finish glazed 2B Decentered chimney Ø 400 mm and height 300 mm ELICA 316L stainless steel antiretention hatch 3 simple male DIN 80 fittings on the dome Double acting ELICA 1000 HL stainless steel 316L valve, horn mounting 5 lifting rings including 1 at the bottom of the tank Support + manufacturer's plate 1 single male DIN 65 fitting in ferrule 1 single male DIN 65 fitting in ferrule Taken from the ground 5 thermal regulation rings with water I / O sleeve 4.75 m2 5 heating rings with water I / O sleeve 4.75 m2 Total thermoregulation area 9.5 m2> Thermoregulation ratio per 100 HL 6.31 m2 Tapered connection + stainless steel faceplate for agitator mounting Full stainless steel buffer + EPDM seal for stirring nozzle stirring Total drain pipe + male at the end of DIN 65 piping 4 outside legs, tank height 800 mm Stainless steel flat reinforcement belt 150 x 5

TECHNICAL SPECIFICATIONS - Reference : 004661 - Model : SPAIP5000SER - Effective capacity : 4880 Litres - 304 stainless steel wine rack - Flat bottom with 4% slope - DIN 15 stainless steel tasting tap - Level tap diameter 20 with stainless steel protection - Partial drain with 100x100 square flange and MACON 40 outlet valve - Total drain with 100x100 square flange and MACON 40 outlet valve - Rectangular door 420 x 530 mm positioned at bottom of shell - 3 adjustable stainless steel feet (500 mm high) - Air kit complete with pump and pressure gauge - Air float complete in 316L stainless steel - Gallows - Lifting winch - Clock thermometer - Probe socket - Stainless steel ladder support bar - Vacuum lifting rings - Cooling coil with 4 turns on shell H. 560 mm - Cooling coil with 2 turns on shell H. 300 mm DIMENSIONS - Height 3700 mm (with jib) - Height 3000 mm (without bracket) - Outside diameter: 1666 mm - Inside diameter: 1600 mm

304 stainless steel tank SPAIP SER 2300 model 304 stainless steel wine keeper Flat bottom with 4% slope Bottom thickness 2.0 mm ferrule 1.5 mm 316L stainless steel floating hat Complete pneumatic system 6419 Swivel crane with stainless steel handle Floating hat lifting winch 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable Rectangular door 420x530 mm positioned flush with the bottom of the ferrule Swivel crane with stainless steel handle Cooling coil with 4 rings on the ferrule 2 additional cooling rings on the door Thermowell for probe positioned at the back of the tank Clock thermometer with thermowell Stainless steel DIN 15 tasting tap Level valve Diameter 20 with stainless steel protection clear draft and total drainage with square flange 100 x 100 + ball valve on flange outlet 40 MACON Lifting rings Stainless steel ladder support bars Diameter 1400 mm Height (shell) 1500 mm Height (total) 2600 mm (with stem)

SuperSign Bender automatically produces the edges and listels of your letters from coils of aluminum and stainless steel. Its innovative, fully automated system bends and cuts strips of different materials, with a thickness of 0.8 to 1.2 mm: Letter Box Profile Alu Letter Form Profile Profile Bar Aluminum and stainless steel flat belts 25 to 120 mm high Its cutting tool has been improved and redesigned, it now has 2 separate cutting tools for: flat belts: 3 stainless steel knives have been developed to make the machine even more efficient. the profiles: 4 different discs on an electric motor for even more precise cutting angles. The SuperSign Bender is therefore faster, quieter and more precise. It is the most versatile of the Channel Bender machines for the different usable materials while keeping the quality of work of the Channel Bender machines.

EasySign Bender e automatically creates the edges and listels of your letters from aluminum and stainless steel coils. His system, fully automated , bend and cut the following profiles: Letter Box Profile Alu Letter Form Profile Profile Bar Aluminum and stainless steel flat belts, 25 to 120 mm high. Letter Box Profile Alu is a process combining productivity and aesthetic finish. It allows you to make box letters with illuminated plexiglass faces without having to use the listel for the faces, or the fixing screws for the backs, thanks to the stainless steel EasyClip clips. Profile Bar is an innovative process for easily making box letters with illuminated plexiglass faces. Indeed, this letter is assembled without welding. EasySign Bender e comes with SDSBenderCAD software, allowing you to process and optimize your DXF files on your workstations.