Electronic systems - Import export

Eratec designs, manufactures and sells metal fibre gas burners. The Eratec metal fibre burner is an emitter with a refractory stainless steel combustion head on a Bekinit® knitted metal fibre radiating surface. The combustion head is equipped with an electronically controlled air/gas premixing system.

Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3°

Axon' design and manufacture composite cables specially designed to meet customer requirements irrespective of the application. They are able to resist the most demanding electrical, mechanical and environmental requirements. Advantages Dependent on the application Flexibility Flexlife, resistance to torsion Resistance to fuel, heat and solvents EMI protection Resistance to sterilisation (medical application) Construction Flat or round construction integrating flat or round wires, coaxial cables, tubes, shielded cables, ... Hybrid electrical, electro-optical cables Composite cables insulated with fluorinated materials, heavy metal free materials, halogen free materials, PTFE, celloflon®, vitax™, PEEK, silicone and other materials suited for your applications Applications Electromechanics Engines Machines Robots Medical imaging Endoscopy Radars Missiles Electronic systems Satellite cabling Research, ...

The Cyclomix™ Expert is an innovative, industrial solution that is configured to meet the needs of the customer. Description Capable of metering 1 component as well as mixing 2 and 3 component materials Flexible modular design - up to 24 programmable components PH version available for acid-catalyzed coatings Handles up to 50 recipes Constant flow technology Performance Production flush 5-step programmable sequence Weekend flush 6-step p rogrammable sequence Continuous ratio and pot life monitoring Multiple flow meter options available to meet your requirements Productivity Consistent finish quality Reduced labor - on demand mixing In-line static mixer reduces flushing solvent and faster color changes Reduced fluid waste Less rework Reduced hazardous waste Sustainability All stainless-steel construction compatible with most materials PH (acid catalyst) version available Filter/regulators assemblies are standard equipment, constructed of stainless steel compatible with most...

The Cyclomix™ Expert is an innovative, industrial solution that is configured to meet the needs of the customer. Description Capable of metering 1 component as well as mixing 2 and 3 component materials Flexible modular design - up to 24 programmable components PH version available for acid-catalyzed coatings Handles up to 50 receipes Constant flow technology Performance Production flush 5-step programmable sequence Weekend flush 6-step p rogrammable sequence Continuous ratio and pot life monitoring Multiple flowmeter options availbable to meet your requirements Productivity Consistent finish quality Reduce labor - on demand mixing In-line static mixer reduces flushing solvent and faster color changes Reduced fluid waste Less rework Reduced hazardous waste Sustainability All stainless-steel construction compatible with most materials PH (acid catalyst) version available Filter/regulators assemblies are standard equipment, constructed of stainless steel compatible with most material

Measurement of oxygen in combustion gases (specially dedicated to natural gas boilers) Brand : SETNAG ADVANTAGES : No need for reference gas: use of the MicroPoas® Communication: analogue outputs 4-20 mA and RS485 as standard Integrated safety: 3 alarms Control of operating costs, virtually maintenance-free Fast set-up (sensor and electronic system in a single apparatus) Simple and intuitive use MEASUREMENT TECHNIQUE The gases own speed inside the duct enables them to flow freely up to the sensor where they are analysed. They pass through co-circular tubes the length of which can be adapted to the dimensions of the duct. The electronic system collects the temperature and voltage signals from the MicroPoas®, and gives the oxygen concentration. EXEMPLES OF APPLICATIONS Control of combustion in power generation, district heating operations Control of processes... OXYBOX'ATK

In situ oxygen probe Brand : SETNAG ADVANTAGES : Excellent response time, thanks to the MicroPoas® miniaturized zirconia sensor. Increased reliability and easy set-up as no reference gas is required. The excellent measurement reproducibility ensures perfect control of your process. MEASUREMENT TECHNIQUE / RUNNING The TTH sensor is directly plunged in the gases for analysis. TTH can be used from 500 to 1050°C depending on the model. The MicroPoas® signals are collected by one of our electronic systems (ATS2020 or Oxybox’Air) which will display and/or send a 4-20mA output signal proportional to the measured oxygen concentration. EXAMPLES OF APPLICATIONS Heat treatment Control of combustion Waste incineration Crematorium

Measurement of oxygen in combustion gases and in incineration gases. QAL1 compliant (EN14181) Brand : SETNAG ADVANTAGES No need for reference gas: use of the MicroPoas® Maximum gas temperature: up to 1300° C continuously, depending on the version No sensitive parts and no hot spot inside the duct Free circulation of the gases you analyse "Detachable" probe tubes: easy to dismantle and replace for simple and cost-effective maintenance. Limited maintenance and service operations: easy probe tube cleaning with compressed air and/or fast dismantling. MEASUREMENT PRINCIPLE The gases own speed inside the duct enables them to flow freely up to the sensor where they are analysed. They pass through co-circular tubes the length of which can be adapted to the dimensions of the duct. The electronic system collects the temperature and voltage signals from the MicroPoas®, and gives the oxygen concentration. EXAMPLES OF APPLICATIONS Control of combustion in power generation, district heating...