Dusts - Import export

The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission measurement. • continuous, precise and reliable dust quantity measurement (mg/m³) • dust measurement possible in large channel diameters • output of dust concentration as absolute value • ATEXcertified • measurement of dust concentration at high temperatures or harsh environments • trend signal or absolute value

Continuous dust monitoring in ambient air control system areas, silo areas, boiler houses, workstations. AirSafe 2 is an electrodynamic dust sensor monitoring leakages and dust concentration in ambient air in production facilities or workplaces. This versatile sensor allows you to keep under control your ambient environment. An alarm is generated when a threshold is exceeded. • controlled and selfmonitored system • calibratable alarm • prevents creation of dust explosion zones • dust concentrations in the ambient air are safely monitored • AirSafe 2 can be used as early detection for dust which could endanger the workplace adapted for applications in zone 22 dust • possible dust leakage from the process is quickly detected

Stand alone cross stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. • emissions measurement (mg/m³) • advanced sensor design includes automatic drift checks • resistant to contamination • simple installation, setup and maintenance • external display and keyboard for easy setup • can be purged with instrument air providing lower cost of ownership • lower level of maintenance than traditional opacity systems • mg/m³ output, once calibrated

The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial applications. Due to its wide dynamic range, the DM 170 may be used in combustion applications as well as in higher dust loading applications (such as power, cement and metals smelting, and in processes without filtration). Its simplicity and wide operating range makes it also ideally suited for process optimisation applications. • ProScatter™ backscatter sensor technology • Manual and remote Zero and Span checks available to ensure optimal instrument performance • purge flow fail sensor and optical shield options • nonintrusive system designed to operate in noncondensing stack environments • Singleside stack installation reduces contamination risk

Controller based filter dust leak monitor (0100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. where performance approvals are not required. • reliable monitoring of leaking and broken bags in dust collectors • sensor configured remotely via controller • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

TECHNICAL DETAILS Interior ready-to-use smooth finish coating, easy to apply - requires less sanding down than a traditional coating and therefore creates less dust. Apply with spatula, then sand down. Less dust is created, and the dust is less volatile. SUITABLE SURFACES Interior walls and ceiling : plasterboards, gypsum blocks, concrete, cement coating, aerated concrete, sealants. REFERENCE DOCUMENTS DTU 59.1. PACK SIZE 25 kg bucket. AFNOR NFT 36.005 AMOUNT REQUIRED From 0.6 to 1 kg/m² depending on quality of surface. DRYING TIME 6 to 24 hours depending on conditions and quantity applied. RECOMMENDED APPLICATION To avoid all traces of filler, finish with a slightly rounded action.

Filter dust approved particulate monitoring system for low dust concentrations from dry industrial processes.

Multisensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced probe electrification multisensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not necessary. • PRO version permits multichannel networked system for plantwide monitoring of emissions (for up to 32 sensors) • full colour, icondriven menu and display • two independent alarm set points • relative dust reading on clear scale 0100% • dust 'overrange' icon • security setting • digital signal processing • field upgradeable

Multisensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced probe electrification featuring long term data logging for process trend analysis and reporting. • reliable monitoring of leaking an broken bags in dust collectors • sensor configured remotely via controller • large graphic and numeric display • reduces filter maintenance intervals, process downtimes and filter costs

MCERTS QAL1 approved, stand alone or multisensor particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes. • ProScatter™ backscatter sensor technology with superior minimum detection <1mg/m³ • certified to 15 mg/m³ for processes with low typical emissions limits • manual and remote zero and span checks available to ensure optimal instrument performance and to comply with EN 13284/QAL1 • automatic functionality check • purge flow fail sensor option with inbuilt automatic optical shield activation • flue gas blocker option to protect plant engineers from harmful flue gases during maintenance

Certified multisensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zones and in dry processes with elevated pressures. Advanced probe electrification featuring long term data logging for process trend analysis and reporting. • reliable measurement of leaking and broken bags in dust collectors • sensor configured remotely via controller • automatic sensor drift checks • automatic probe check for improved data integrity • reduces filter maintenance intervals, process downtimes and filter costs

The Dust Alarm 40 provides incredible capabilities at a costeffective price for the continuous monitoring of broken bags in fabric filter baghouses. As a ‘Dust Gross Filter Failure Detector’, the instrument detects significant increases in particulate loading which indicates a failure in the arrestment plant, providing warnings of filter media degradation in baghouses and cartridge filters. • extremely rugged, accurate & repeatable dust measurement device • two independent alarm set points • relative dust reading on clear scale 0100% • dust 'overrange' icon • security setting • digital signal processing • field upgradable

The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site air quality.

Multisensor dust monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zones. Advanced probe electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. • reliable measurement of leaking and broken bags in dust collectors • sensor configured remotely via controller • automatic sensor drift checks • automatic probe check for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Standalone TÜV approved filter dust monitor suited to the measurement of filter emissions after bag houses, cartridge filters, cyclones etc. • reliable measurement of leaking and broken bags in dust collectors • external display and keyboard • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Standalone filter dust leak monitor (0100%) for filter emissions monitoring after baghouses, cartridge filters, cyclones etc. where performance approvals are not required. • reliable monitoring of leaking and broken bags in dust collectors • manual sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtime and filter costs

Controller based filter dust leak monitor (0100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. • reliable monitoring of leaking and broken bags in dust collectors • sensor configured remotely via controller • manual sensor drift checks probe check option for improved data integrity reduces filter maintenance intervals, process downtimes and filter costs

PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 according the ISO 10473 Standard. QAL 1 certified and US EPA approved.

Filter leak monitor suited to filter control applications after fabric dust filter type (baghouse) arrestment plant.

Standalone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0100%) after bag houses, cartridge filters, cyclones, etc. • reliable monitoring of leaking and broken bags in dust collectors • external display • inbuilt sensor drift checks • probe check option for improved data integrity • reduces filter maintenance intervals, process downtimes and filter costs

Capture and retention of all dusts at the source. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). Each gel, specifically developed according to its application, allow you to reduce dusting. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel BENEFITS • Cheap Solution • Easy to use • Reproducible operating mode

Capture and retention of all dusts at the source. The solution is suitable for all types of dust harmful or not (Asbestos / Lead / Silica / Dusts,…). Our Easygel Protect® cutting solutions guarantee a dusting <to 10f / L. This performance is achieved in compliance with the product instructions, in a regulatory operations and adequate staff training. SPECIFICATIONS • Capture and retention of all dusts at the source (Asbestos / Lead / Silica / Dusts,…) • Predosed and ready to use product • Transparent and nonharmful gel • Suitable for contact with drinking water BENEFITS • Cheap Solution • Suitable in cramped environments • Easy to use • Reproducible operating mode

We are Members of the Local Mining Community in Congo and East Africa, in charge of Marketing, for the local miners Advertising, communication and sources to the potential Diamond and Gold Dust buyers, agents/brokers or partners for our Mined Gold Dust (Au-Metal ) and Diamond. We Have big quantity of gold nuggets, bars and dores in Mali, Kenya, Uganda,Burkina Faso, Conakry... GOLD FORM : Bars, Nuggets, Dust PURITY: 96% Better CARATS: 22crts QUANTITY: 310KG We sell at very affordable prices for comp... Contact me : +33751833116 ( available on whatsapp) Mrs MEDARD