Results for
ACTON S.A.
France
Price per packaging-unit * 5kg packaging bucket
Request for a quoteACTON S.A.
France
Price per packaging-unit * 5kg packaging bucket
Request for a quoteACTON S.A.
France
This item refers to DIN 9021 but P6.6 material is not guaranteed by norms
Request for a quoteACTON S.A.
France
This item refers to DIN 125 but P6.6 material is not guaranteed by norms
Request for a quoteACTON S.A.
France
Rod = AISI 420 Thread = Stainless steel A2 EA = Assembling thickness
Request for a quoteACTON S.A.
France
Rod and thread : stainless steel EA = Assembling thickness
Request for a quoteACTON S.A.
France
Flat Washers (Flat) Stainless Steel A2 - DIN 433
Request for a quoteACTON S.A.
France
Stainless Steel A2 - DIN 125 B Flat Decollete Washers
Request for a quoteACTON S.A.
France
Rod = Stainless steel A2 Thread = Aluminium EA = Assembling thickness
Request for a quoteDEME
France
Flat gasket for gas from DN12 to DN50 In synthetic-Rubber Fibre in conformity with NF E29-533 standard In Nitrile (NBR) 85 +/- DIDC in conformity with EN549 A2 H3 standard
Request for a quoteNORELEM FRANCE
France
Maintenance-free high quality link bushings. Sustainable constant use of force during opening and closing. Optimum stability through the conical, U-profile clamping arm. Accessory: 05280 Protective caps 07111 Ball-end thrust screws, stainless steel 07119 Thrust screws, stainless steel 07120 Grub screws with thrust point DIN 6332 07140 Thrust pads DIN 6311 Drawing reference: 1) stop pin position 1 2) stop pin position 2
Request for a quoteNORELEM FRANCE
France
Self-locking trapezoidal thread, spindle has end lock. Note: The through hole allows easy clamping and positioning of the workpiece. Drawing reference: 1) centring hole for 02210
Request for a quoteNORELEM FRANCE
France
The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The floating joint unit is mainly used when: a temperature change alters the dimensions of a component assembly inaccuracies occur manufacturing tolerances must be compensated for the position of the components varies due to dynamic loads
Request for a quoteNORELEM FRANCE
France
Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.
Request for a quoteCONTENEUR LYON
France
40ft Flatbed Containers for Shipping Discover the benefits of 40ft flatbed containers for shipping bulky goods. Dimensions of a Used 40ft Flatbed Fixed Container 40ft flatbed containers are an ideal solution for transporting bulky and oversized items, providing a cost-effective and robust option to meet your shipping needs. At 1001 Containers, these used flatbed containers are designed to provide a solid base made from durable Corten steel, capable of supporting a wide variety of goods. 40ft External Length: Measuring 12.192 metres, this generous length allows for a large quantity of goods to be transported without compromising the integrity of the cargo. 2.438m External Width: With a width of 8ft, this container provides ample space to load bulky items while ensuring their safety during transport.
Request for a quoteREP INTERNATIONAL
France
Machine features Closing force 5,000 kN. Size of the platens 1,500 x 630 mm. Injection volume 740 cm³. Machine developed for the largeseries molding of parts with inserts, such as for example the injection molding of housing seals.
Request for a quoteREP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
REP INTERNATIONAL
France
In short, large flat gasket REP machines mean Clamping quality Thick traverses, multiple synchronized clamping operations; Injection of long thin sections Injection pressure up to 3,000 bar and circuit division with several injection units; Productivity Very fast 3step clamping, doubleplate kits; Ergonomics/access to the mold Widthwise heating plates, demolding kit or sliding platen. These types of machines have been developed for largeseries injection molding involving parts with inserts, for example the injection molding of battery pack seals. Based on its longstanding experience in this field, REP offers a comprehensive range of machines with largesized heating plates and adjustable configurations to fully comply with the technical specifications of each application and all client’s needs.
Request for a quoteDOREY
France
Four columns press with mechanical balancing system SYSCO exclusive Cutting power from 30 to 400 Tons Cutting area from 900 x 600 to 2500 x 1200 mm Cutting stroke from 110 to 250 mm 4 manual or motorised mechanical stops accuracy +/ 0.01 mm Trough cutting or kiss cutting on Picard steel plate 60 HRC accuracy +/ 0.01 mm Slow down speed of the bridge 10 mm before touching the material Quick change of dies Touch screen control in different languages Use of electrical, hydraulic and pneumatic standardized Safety guards protection and / or photocells Class 4 Meets C.E. standards
Request for a quoteDOREY
France
ANY TYPE LARGE SIZE ENVELOPE CLOSE DIE CUTTING FOUR CORNER CUTTING FOR POCKET TYPE AND WALLET TYPE ENVELOPES GENERAL DESCRIPTION Head driven by double chain with frequency converter cushion system to stop at one cutting position with position accuracy ±0.2mm Working capacity up to 400,000 blanks per 8 hours with maximum material stack thickness up to 60mm Die lubrication for clean cuts and longer die life Cutting pad shifter extends pad life Optional adjustable die holder allows for cutting many different sizes of envelope with the same four corner dies, thus saving the cost of expensive dies Maximum blank size 480×550mm (THNC N25) / 600×600mm (THNC N30) Optional pneumatic head center ejector ensures maximum cutting size accuracy for stack material Optional four corner dies Optional front and rear waste removal conveyor belts
Request for a quoteDOREY
France
An integrated servo cutting machine with high accuracy and high productivity. The HHC series servo cutting machine is specially designed for die cutting the products with low noise, low vibration, high accuracy and high productivity. HHC series is suitable for multi layer roll form laminated soft material and less than 0.3mm thick rigid metal film materials. HHC SERIES ARE DESIGNED FOR VARIOUS INDUSTRIES CONVERTING APPLICATIONS RFID smart label, printed label sticker, electronic components, LCD films, medical components, automotive products, name plate, gasket, insulation foam
Request for a quoteDOREY
France
Three sets of servo motor position systems, position accuracy +/ 0.2mm. Working capacity up to 57 600 pieces of abrasive disc per 8 hours with two cavity cutting die to cut two plies of roll material. User friendly computer control and 100 cutting program memory provides easy operation. Punch slugs go through punch tube to slug box under head and you can use a vacuum cleaner to clear out the slugs. Cut part auto knock out & stacking system will stack cut parts to preset quantity ready to be packed. This function can save several workers. Auto cutting directly from jumbo rolls can not only simplify manufacturing process, but also achieve material savings up to 15%. Unique stainless steel grid plate feeding device & stacking system can achieve perfect feeding & stacking results for all kinds of non woven felt, Velcro backing
Request for a quoteDOREY
France
Receding head travel controlled by the servomotor, balancing system and 4 columns provide high rigidity and precision of the assembly for a parallel cutting and a power spread equality over the entire surface of the table. LCD touch screen control. Optionally the machine can receive mechanical stops for kiss cutting on steel plate or through cut with material coming from rolls or sheets in semi automatic or automatic mode.
Request for a quoteDOREY
France
Mono Hydraulic cylinder Cutting stroke 110 mm 4 manual or motorized mechanical stops accuracy +/ 0.01 mm Through cut and kiss cut on hardened steel plate 60 HRC Picard accuracy +/ 0.01 mm Slow down stroke 10mm before touching the material Fast die change Touchscreen control in different languages Standard electrical, hydraulic and pneumatic parts Safety guards and/or photocells Class 4 Meets CE
Request for a quoteDOREY
France
Material feeding from sheets or rolls. Pneumatic clamping beam feed with side guides to work several layers of materials without slipping. Cutting power from 25 to 100 tons. Fast and silent Hydraulic pump up to 80 cuts/min, air cooling. Cutting area from 2100 x 500 to 2500 x 1200mm. Cutting head from 500 x 500 mm to 900 x 900 mm, adjustable stroke up to 130 mm or 180 special version. NYLON Cutting Belt. The travelling head movement is controled by servomotor and ball screw (2nd axis) with an accuracy of + or 0.2 mm. 4 motorized adjustable mechanical stops ensure precise cutting depth accuracy + / 0.02 mm and thus prolong the life of the belt or pad. Use of standard electrical, hydraulic and pneumatic parts. Safety guards with Plexi windows connected to the system shutdown and / or photocells Class 4 for strict compliance with CE Available Options head rotation 360 °, the 3rd axis of the CNC. Automatic nesting SYSNEST software saves
Request for a quotePROFELEC
France
Your reference product LEG010736 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.
Request for a quoteResults for
Flats - Import exportNumber of results
28 ProductsCountries
Company type