Design of cylinders- pneumatic - Import export

Doubleacting pneumatic cylinder acc. to DIN ISO 21287. Piston rod with internal or external thread, position detection for proximity switch and flexible damping on both sides. Thanks to their compact structural dimensions, compact cylinders are ideal for use in installation spaces where space is limited.

For pneumatic cylinders ISO Ø16 and Ø25 Guided on ball bushings Adjustable mechanical stops Manipulator made with your components = competitiveness These linear units make it possible to carry out any translation requiring precision and rigidity, to move up to 15 kg on 1, 2 or 3 axes (handling, assembly, loading, transfer, packaging …). By adding a cylinder with sensors and flow limiters as well as hydraulic shock absorbers from the supplier of your choice, you get a complete module that generally meets the requirements of the panels of suppliers, at a very competitive price.

U guide unit for pneumatic cylinders ISO Ø32 to Ø80 Short guide on bronze bearings Protected by wipers seals Short guide for ISO15552 pneumatic cylinder This Classic Series provides antirotation of the cylinder rod. The guide is shorter than the H Classic series and is only available in plain bearings, so this series is recommended for low strokes and moderate loads. Anticorroding Uguide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series. Protection kit and back stop kit on Uguide The protection kit (tube wrapping the rods at the rear of the guide), for example allows to avoid a guarding housing on a semiautomatic machine (label maker …). The back stop kit, with hydraulic shock absorber, allows

Table for pneumatic cylinders ISO Ø16 to Ø40 Guided on ball bushings Protected by wipers seals More rigid than a H guide unit These tables maintaining the same quality of guidance and rigidity throughout the stroke. For a offcentered payload in vertical, these tables allow to be more rigid than a guide unit in H. Hydraulic shock absorber on this table A hydraulic shock absorber may be placed in opposition to the pneumatic cylinder to dampen, for example, the descent and/or limit the stroke at the output of the cylinder rod. The retracting stroke can be adjusted by the floating rod coupling. Use in harsh environment For dusty environments, additional nitrile or polyurethane scrapers can be added in front of the ball bushings. An anticorrosion version can be proposed with the rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum). It’s possible to make these tables with plain bearings (bronze or polymer) on request.

Fixing by its sturdy end plate Drived by ISO pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Easier implementation Attached to the frame by its end thanks to a sturdy flange, they serve as a lifting module for assembly, loading and conditioning machines. By combining them with Type 37 linear manipulators, you can create 2axis ZX. Equipped with hydraulic shock absorbers, inductive sensors and flow limiters, these manipulators are ready to be installed and wired. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic shock absorbers and the inductive sensors this saves time, guarantees the reliability of the adjustment and ensures an optimal lifetime of these components. All these components are very common on the market and are very accessible, thus facilitating the maintenance

Drived by pneumatic cylinder (ISO or rodless) Guided by rolling guides Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation More than a rodless guided cylinder With their selfsupporting aluminum beam and being equipped with mechanical endofstroke stops, hydraulic shock absorbers, inductive sensors and flow limiters, these gantries are more than a cylinder without guided rod, they are real handling axes ready to install and wired. They are intended for the transfer of loads from 3 to 50 kg over strokes up to 1500 mm. Pneumatic Cartesian manipulators The mobile carriage, drived by a rodless cylinder (or a rod cylinder in short stroke to be more economical) allows to carry a perpendicular axis to create cartesian manipulators with 2 or 3 axes, with manipulators Type 37. Optimized end of stroke adjustments Pneumatic gantry with intermediate positions with through-travel

Drived by integrated pneumatic cylinder Guided by 2 rods on ball bushings Adjustable mechanical stops Hydraulic shock absorbers Inductive sensors Flow limitation Compact and robust manipulator With a compact and very robust design, they are suitable for shortstroke movement where rigidity is necessary. They are often used in vertical or lifting modules in the design of pneumatic handling assemblies. For longer strokes, use the Type 37 manipulators. Several mounting directions possible Equipped with the same end plates and without exceeding of the cylinder at the end of the stroke, these compact manipulators can be fixed by the 2 end plates to have the movable central body, but they can also be fixed by the body, the rod cylinder can then be oriented up or down. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic dampers and the inductive detectors this saves time

H guide unit for pneumatic cylinders ISO Ø12 to Ø100 Long guide on ball bushings or bronze bearings Protected by wipers seals H guide unit according ISO standard This Classic series of linear guide unit is the most common on the market. It ensure the guiding and antirotation of the payload, the floating coupling protects the rod of the cylinder from any mechanical stress. Adapted to the ISO6432 (Ø12 to 25) and ISO15552 (Ø32 to 100) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators. Guide unit on plain bearing or ball bearing The plain bearings version is recommended for static radial loads, short strokes, dusty environments, it’s the more economical version. The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and offcentering loads. For critical applications, we propose Strengthened and Heavy series and for simple antirotations, you can opt for Useries, Classic or Light.

H guide unit for pneumatic cylinders ISO Ø25 to Ø125 Very sturdy guide on plain bearings Protected by wipers seals Guide unit with large rods This Heavy Series has bigger guide rods than the Strengthened series. The thick front plate also allows long centering of the guide rods for better resistance to torsion. Only available in plain bearing version, it’s recommended for important radial loads in static. Sturdy guide for Ø125 cylinder Adapted to the ISO6432 (Ø25) and ISO15552 (Ø32 to 125) cylinders, this range therefore also makes it possible to meet the more robust guide needs for Ø125 cylinders, the guide rods then being Ø40, on 4 plain bearings. Anticorroding heavy guide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and front plate are remaining in anodized aluminum (suffix /AC after the reference). Scrapers in polyurethane can be proposed for dusty or dirty environments.

Hguide unit for pneumatic cylinders ISO Ø25 to Ø125 Sturdy guide on ball bushings or bronze bearings Protected by wipers seals Sturdy Hguide This Strengthened Series has bigger guide rods than the Classic series and a thicker front plate for longer centering of the rods to increase torsion strength the plate / rods connection is generally the weak point of the Classic series when offcentered forces or loads are applied. Guide unit for Ø125 cylinder Adapted to the ISO6432 (Ø25) and ISO15552 (Ø32 to 125) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators. Sturdy guide on plain bearing or ball bearing ? The plain bearing version is recommended for static radial loads, short strokes, dusty environments, it’s also the more economical version. The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and offcentered loads. For critical applications, we propose Heavy series.

U guide unit for pneumatic cylinders ISO Ø12 to Ø80 Antirotation guide on bronze bearings Protected by wipers seals Antirotation for ISO pneumatic cylinder This Light Series provides antirotation of the cylinder rod. With limited dimensions, it permits to use an ISO cylinder for shortstroke translations, while protecting the rod of the cylinder with its floating rod coupling. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series.