Results for
ETIC TUBES ET PROFILES
France
Copper tubes with chamfers
Request for a quoteETIC TUBES ET PROFILES
France
Square, rectangular copeer tubes
Request for a quoteEID
France
The PACK'CLIM is an easy “all in one” solution. Prices may change It contains everything needed to install an air conditioner in one box: Tubing, wall or floor bracket, cable and condensate tube, etc. according to the This complete kit saves a lot of time. Compatible with all refrigerant fluids.
Request for a quoteEID
France
or the service of installation technicians, eid exercises strict quality control on the copper, coils, bars, REFNET® refrigerant tubing. Here are a few explanations: THE TECHNICAL PROBLEM Technical performance of the air conditioning and refrigeration systems with the new refrigerant fluids (R410A, R32, etc.) is considerably reduced by the effect of the residual mineral oil used in the manufacture of ACR tubes ACR, used for heat exchangers and refrigerant tubing. THE SOLUTION Installing SUPERCLEAN tubes guarantees less residue inside the tubes. The internal residue ratio, defined as 0.1 mg/m, is only one sixtieth of that of conventional tubes. This means that there is no need for future cleaning of the exchangers and tubing, thus increasing the performance of the air conditioning and refrigeration systems. Our copper is manufactured using Grade A cathodes.
Request for a quoteLBI
France
We manufacture rough or fully machined collector and anode bridge in copper (with silver coating) and CuCrZr
Request for a quoteLEBRONZE ALLOYS
France
Machinining of copper, aluminium, titanium alloys and superalloys.
Request for a quoteLEBRONZE ALLOYS
France
Lebronze alloys Group was born from the integration of different companies specializing in copper alloys, copper, nickel alloys, aluminium alloys, specialty steels, stainless steels, titanium and nickel superalloys. Thanks to a multidisciplinary know-how, the Group provides innovative solutions to all major industries such as Aerospace, Oil & Gas, Power, Railway but also in sectors manufacturing smaller equipment and products.
Request for a quoteLEBRONZE ALLOYS
France
Lebronze alloys Group was born from the integration of different companies specializing in copper alloys, copper, nickel alloys, aluminium alloys, specialty steels, stainless steels, titanium and nickel superalloys. Thanks to a multidisciplinary know-how, the Group provides innovative solutions to all major industries such as Aerospace, Oil & Gas, Power, Railway but also in sectors manufacturing smaller equipment and products. Our 16 production facilities and 1,400 employees manage a unique range of metal processing technologies: continuous and semi-continuous casting, sand casting, die precision chill casting (manual, mechanized and automated), centrifugal casting, extrusion, ring rolling, hot and cold rolling, drawing, open-die forging, hot stamping, closed-die forging, cold forming, machining, non-destructive testing, etc. The Group’s commitment is to find appropriate and optimized solutions for every sector’s requirements.
Request for a quoteLEBRONZE ALLOYS
France
Lebronze alloys Group was born from the integration of different companies specializing in copper alloys, copper, nickel alloys, aluminium alloys, specialty steels, stainless steels, titanium and nickel superalloys. Thanks to a multidisciplinary know-how, the Group provides innovative solutions to all major industries such as Aerospace, Oil & Gas, Power, Railway but also in sectors manufacturing smaller equipment and products. Our 16 production facilities and 1,400 employees manage a unique range of metal processing technologies: continuous and semi-continuous casting, sand casting, die precision chill casting (manual, mechanized and automated), centrifugal casting, extrusion, ring rolling, hot and cold rolling, drawing, open-die forging, hot stamping, closed-die forging, cold forming, machining, non-destructive testing, etc.
Request for a quoteEID
France
8 multi-diameter bypasses Copper for brazing: Black insulation: Black insulation BL-s3,d0 (M1) 13MM Bend: MSH85 only
Request for a quoteEID
France
8 multi-diameter bypasses Copper for brazing: Black insulation: Black insulation BL-s3,d0 (M1) 13MM Bend: MSH85 only
Request for a quoteEID
France
HEADERs are perforated tubes for VRF (variable refrigerant flow) air conditioning systems. They centralise an assembly of bypasses. Minimum charge loss. Minimum brazings. They centralise an assembly of bypasses (only 1 inspection point).
Request for a quoteEID
France
HEADERs are perforated tubes for VRF (variable refrigerant flow) air conditioning systems. They centralise an assembly of bypasses. Minimum charge loss. Minimum brazings. They centralise an assembly of bypasses (only 1 inspection point).
Request for a quoteEID
France
Eid is the exclusive distributor of the REFNET® brand: Distribution unions for VRF variable refrigerant flow air-conditioning systems Saves time with multi-diameter inlets and outlets, to be cut as required. Minimum charge losses and minimum brazing. On request, we supply models that exactly meet your needs, whether following our recommendations, to drawings (block diagrams), or following manufacture of "Constructor Equivalence" kits. Some manufacturers specify an equal distribution of the fluids between outlet and bypass. The U body meets this requirement
Request for a quoteEID
France
Reducers and increasers are used to reduce or increase the diameter of one to three REFNET® sections
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EID
France
Eid is the exclusive distributor of the REFNET® brand: Distribution unions for VRF variable refrigerant flow air-conditioning systems Saves time with multi-diameter inlets and outlets, to be cut as required. Minimum charge losses and minimum brazing. On request, we supply models that exactly meet your needs, whether following our recommendations, to drawings (block diagrams), or following manufacture of "Constructor Equivalence" kits.
Request for a quoteEID
France
Eid is the exclusive distributor of the REFNET® brand: Distribution unions for VRF variable refrigerant flow air-conditioning systems Saves time with multi-diameter inlets and outlets, to be cut as required. Minimum charge losses and minimum brazing. On request, we supply models that exactly meet your needs, whether following our recommendations, to drawings (block diagrams), or following manufacture of "Constructor Equivalence" kits.
Request for a quoteEID
France
The disconnectable tubing makes the installation disconnectable. We manufacture tubing (2 gas-liquid lines), equipped with 4 disconnectable female unions, and we supply the 4 disconnectable male unions, that you will have to screw on the machine side. Work on a refrigeration circuit (connection / commissioning) should only be carried out by a technician holding a proficiency Certificate, details ART.543-78.)
Request for a quoteEID
France
Schrader valves for PE couplers Pressure gauge pick-off cap for PE couplers
Request for a quoteEID
France
Fluids R22 & R407 Seal-break couplers With copper tube 150mm-long to facilitate brazing Screw together, Male or Female 1/4 SAE With or without pressure gauge pick-off. Brass for brazing (PE).
Request for a quoteEID
France
Fluids R22 & R407 Seal-break couplers With copper tube 150mm-long to facilitate brazing Screw together, Male or Female 1/4 SAE With or without pressure gauge pick-off. Brass for brazing (PE)
Request for a quoteEID
France
Allows two precharged systems to be coupled when screwed together. Unions are tightened with two spanners, until the 2 seals, male and female, are broken.
Request for a quoteEID
France
Allows two precharged systems to be coupled when screwed together. Unions are tightened with two spanners, until the 2 seals, male and female, are broken.
Request for a quoteEID
France
Allows two precharged systems to be coupled when screwed together. Unions are tightened with two spanners, until the 2 seals, male and female, are broken.
Request for a quoteEID
France
Still wrongly referred to as precharged tubing, the “ready-to-use” tubing is simply tubing that is vacuum drawn. Prices may change It enables the two elements of a system to be connected, without having to vacuum redraw on the site and charge the tubing with gas. No action is required, according to the price of copper the line is ready to be installed and the air conditioning ready to operate. This product already exists in a basic version or as a complete kit (with condensate tube and electric cable). Any work on a refrigeration circuit (connection / commissioning) must be carried out by a technician holding a proficiency certificate. (detail ART.543-78.)
Request for a quoteEID
France
The INSTALLATION KIT offers a practical pre-equipment solution:Everything is packed in one box.
Request for a quoteResults for
Coppering - Import exportNumber of results
101 ProductsCountries
Company type
Category