Results for
NORELEM FRANCE
France
The rest pads can be used both as a stable and precise support and as a stop. The pin form of the rest pad also allows it to be used with components with constricted support points.
Request for a quoteNORELEM FRANCE
France
Version: Ground. Top face without centerbore. Note: Rest pads can also be used as feet for jigs and fixtures. Advantages: Cerazur is extremely impact and bend resistant. The basis of this material is zirconium oxide. It is a composite metal-ceramic material.
Request for a quoteNORELEM FRANCE
France
Hardened and ground. Top face without centerbore. Note: If more than one rest pad is used, the support height can be reground. Rest pads can also be used as feet for jigs and fixtures.
Request for a quoteNORELEM FRANCE
France
Self-aligning pads are used to support and clamp unmachined and machined workpieces. They also serve as stops, supports and thrust pads in fixtures and toolmaking. Ball secured against rotation. Form O: The abrasive diamond surface is bonded firmly to the ball. It is ideally suited to supporting smooth or slippery applications with a minimum of clamping pressure. This allows the diamond particles to get a firm grip on a very small area with minimum damage to the surface. The diamond surface offers excellent wear resistance. Form P: The polyurethane surface is vulcanised firmly to the ball. It is abrasion-resistant and does not discolour. It offers optimum protection against damage to delicate surfaces. The pearl-like surface gives a firm grip and allows air to escape so as to prevent any suction effect between the contact surface and the self-aligning pads. Advantages: The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement.
Request for a quoteNORELEM FRANCE
France
Body tempered, black oxidised. Ball hardened, bright. Inserts: Form C, F hardened, black oxidised. Form M with carbide serrations, black oxidised. Form K white. Form E hardened, bright. Form O diamond impregnated surface comparable to 100 grade abrasive grit. Form P polyurethane surface, hardness 60 Shore. Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. In addition, they serve as stops, supports and thrust pads in fixtures and toolmaking. The ball can be removed from the housing by applying light pressure to the socket head screw. Ball secured against rotation. Advantages: Highly cost-effective as inserts can be exchanged. The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement. Drawing reference: Form C: flattened steel insert, smooth Form E: flattened stainless steel insert, smooth Form F: gripper face Form K: flattened POM insert, smooth
Request for a quoteNORELEM FRANCE
France
Body carbon steel. Ball, ball bearing steel 1.2067. Form D: Ball with POM insert. Form H: Ball with POM insert. Form K: Ball with carbide insert. Form M has a carbide ball. Version: Body tempered and phosphated. Ball hardened. Form M ball nickel plated. Note: Self-aligning pads serve as stops, supports and thrust pads in fixture constructions. Ball secured against rotation. * Valid only if the minimum bore depth is observed. Drawing reference: Form C: with male thread, flattened ball, smooth. Form D: with male thread, flattened ball, with POM insert. Form F: with male thread, flattened ball, diamond grip. Form M: with male thread, flattened ball, with carbide insert. Form G: press fit, flattened ball, smooth. Form H: press fit, flattened ball, with POM insert. Form J: press fit, flattened ball, diamond grip. Form K: press fit, flattened ball, with carbide insert.
Request for a quoteNORELEM FRANCE
France
High-carbon steel tempered and black oxidised. Brass bright.
Request for a quoteNORELEM FRANCE
France
Ball element case-hardened steel. Thrust pad ETG 100 steel.
Request for a quoteNORELEM FRANCE
France
Rest pads are for supporting machined and non-machined parts. They can also be used as stops and thrust pads in fixtures and toolmaking. Studs or grub screws can be screwed and glued into the tapped hole D to make a rest pad with external thread.
Request for a quoteNORELEM FRANCE
France
Body tempered. Ball hardened (50 - 55 HRC). Note: Self-aligning pads serve as stops, supports and thrust pads in fixture construction. They can also be installed in existing clamping devices, e.g. arness clamps. Ball is secured against rotation. Drawing reference: Form C: male thread, smooth flattened ball Form F: male thread, serrated flattened ball
Request for a quoteNORELEM FRANCE
France
Case-hardened and black oxidised. Note: Positioning feet are used as supports, stops and thrust pads for fixtures and general machine and appliance construction. Drawing reference: Form A: External thread and flat face Form B: External thread and convex face Form C: External thread and serrated face Form K: External thread and carbide serrated face Form L: External thread and POM insert Form D: External thread and flat face Form E: External thread and convex face Form F: External thread and serrated face
Request for a quoteNORELEM FRANCE
France
Hardened and ground (HRC 60 ±2). Note: The locating pins are designed to make the joining process easier. Used in combination with hardened locating bushes 02026, they enable exact, low-wear, and fast changes of the workpiece. Versions D1 = 5 and D1 = 6 do not have an internal thread. Drawing reference: Form B: cylindrical pin Form C: rhomboid pin
Request for a quoteNORELEM FRANCE
France
Form A locating pins are used to position workpieces and fixture parts in reamed holes. The flattened Form C can be used to bridge tolerances in hole spacing or to secure the part to be positioned in one direction only. The Form A locating pins can also be used as limit stops or fixture feet. Advantages: Cerazur is extremely impact and bend resistant. The basis of this material is zirconium oxide. It is a composite metal-ceramic material. Drawing reference: Form A and B: cylindrical locating pin Form C and D: flattened locating pin
Request for a quoteNORELEM FRANCE
France
Form C and F: Ball steel, ball seat high-carbon steel. Form G and J: Ball high-carbon steel, ball seat steel. Version: Form C and F: Ball hardened and black oxidised, ball seat phosphated. Form G and J: Ball phosphated, ball seat hardened and black oxidised. Note: The self-aligning pads serve as stops, rests and thrust pads in fixture construction. The seating face returns to the start position when the load is removed. Ball secured against rotation. Drawing reference: Form C: male thread, flattened ball, smooth Form F: male thread, flattened ball, diamond grip Form G: press fit, flattened ball, smooth Form J: press fit, flattened ball, diamond grip
Request for a quoteNORELEM FRANCE
France
Steel class 45 H, black. Stainless steel A 2-70, bright. Drawing reference: L2 = approx. 2x thread pitch
Request for a quoteNORELEM FRANCE
France
Form A: Ball element case-hardened and black oxidised. Form B: Bright. Form C: Ball element case-hardened and black oxidised. Form D: Ball element bright. Form G: Ball element case hardened and black oxidised, foot with anti-slip plate. Note: The anti-slip plate absorbs vibrations and prevents the swivel foot slipping The loading indicated in the table is a recommendation up to which permanent static load the swivel foot can be used.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Padding - Import exportNumber of results
17 ProductsCompany type
Category