Results for
NORELEM FRANCE
France
Housing, grey cast iron. Bearing, ballbearing steel 100Cr6. Seal, rubber NBR. Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.
Request for a quoteNORELEM FRANCE
France
Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm
Request for a quoteNORELEM FRANCE
France
GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50
Request for a quoteNORELEM FRANCE
France
On request: Other slot widths. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)
Request for a quoteNORELEM FRANCE
France
Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)
Request for a quoteResults for
Cast iron - Import exportNumber of results
8 ProductsCompany type