Results for
NORELEM FRANCE
France
Housing, grey cast iron. Bearing, ballbearing steel 100Cr6. Seal, rubber NBR. Pillow block bearings consist of a sealed singlerow ball bearing with a spherical outer ring which is mounted in a housing. Because of the spherical outer surface of the bearing, shaft misalignment can be compensated for. The bearings are manufactured with a plus tolerance. This results in transition or press fits when using shafts with htolerances. The shaft is secured by grub screws on the inner ring. In normal applications, pillow block bearings are maintenancefree due to the lifetime lubrication. In difficult environmental conditions relubrication can be carried out over the grease nipple. All housing dimensions are nominal dimensions for which the usual casting tolerances must be taken into consideration.
Request for a quoteLBI
France
LBI has launched onto the market a metallic alloy with exceptional properties. Following a special request of the CNES (Centre National d’Etudes Spatiales – France), LBI, in collaboration with the laboratory of the famous Ecole des Mines de Paris developed a new alloy with very high damping properties, named EXIUM®AM. The particular chemical analysis, in association with an exclusive centrifugal casting process, has enabled them to achieve the outstanding properties of EXIUM®AM, which are most interesting between -15°C and + 50°C. Outside this range, it reacts like a cast iron.
Request for a quoteADIS FRANCE
France
PARTS FOR INSTALLATION AND OPERATION ON HYDRAULIC NETWORKS cast iron universal coupling MAIN FEATURES - Body in ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Nominal pressure: 16 bar - For all types of pipe (PVC - PE - cast iron - steel) - Complies with standard EN 545 - A.C.S. certified product
Request for a quotePOMPES JAPY
France
Body and cover: GS cast iron Mechanism: brass Lever: grey cast iron (brass as an option). Waterproofing: graphite braid NBR flange O-ring, Viton® or PTFE seal as an option
Request for a quoteNORELEM FRANCE
France
Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm
Request for a quoteNORELEM FRANCE
France
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)
Request for a quoteNORELEM FRANCE
France
Round baseplates with T-slots are used for constructing modular fixtures. These baseplates are positioned and mounted directly on machine tables. The precise longitudinal and transverse slot spacing ensures very high repeat clamping accuracy. The aligning holes are used to align the baseplate on the machine table. Please order locating pins to locate the baseplates separately. Ring bolts with T-nuts for hoisting are supplied. Other dimensions available on request. On request: other dimensions. Drawing reference: 1) hole for DIN 912 cap screw (D4)
Request for a quoteNORELEM FRANCE
France
On request: Other slot widths. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm
Request for a quoteNORELEM FRANCE
France
GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50
Request for a quoteNORELEM FRANCE
France
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4)
Request for a quoteADIS FRANCE
France
Ductile iron spigot with drilled flanges MAIN FEATURES - Made of ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - ISO PN10 and PN16 drilled flanges up to DN150, from DN200, ISO PN10 or PN16 drilling to be specified. or PN16 drilling to be specified - Complies with standard EN 545
Request for a quoteADIS FRANCE
France
Cast-iron hydrant (pavement and roadway) FGL or FGS cast iron body Protection against corrosion Cover attached to body by chain for RONDE roadway model
Request for a quoteADIS FRANCE
France
The tabernacle is used to protect the taps. FGL or FGS cast iron body Protection against corrosion For inlet and shut-off valves
Request for a quoteADIS FRANCE
France
CAST IRON FITTINGS FOR PVC PIPES FGS cast iron body EPDM seal Blue epoxy anti-corrosion coating Complies with standard EN 545
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ADIS FRANCE
France
PARTS FOR MOUNTING AND SERVICING HYDRAULIC SYSTEMS Ductile iron mounting joint MAIN FEATURES - Ductile iron body EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - Galvanised or chrome-plated nuts and bolts - Complies with standard EN 545 - A.C.S. certified product
Request for a quoteADIS FRANCE
France
Ductile iron push-in flanges with express joints MAIN FEATURES - Ductile iron body EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - Express seal accessories supplied - Complies with standard EN 545 - A.C.S. certified product
Request for a quoteADIS FRANCE
France
Cast iron inlet tap with stopcock MAIN FEATURES - Body in cast iron FGL or FGS - Cast iron operating square (30 x 30 mm) - Nickel-coated brass ball - Boss: male thread - Metric pitch (PB or GB) - FSH or FAH shut-off - PFA (Permissible Operating Pressure): 16 bar - PEA (Permissible Test Pressure): 24 bar
Request for a quoteADIS FRANCE
France
PROTECTION OF HYDRAULIC NETWORKS Cast iron strainer MAIN FEATURES Ductile iron body Nominal pressure 16Bars ISO PN10 and PN16 drilled flanges up to DN 150, from DN 200, PN 10 or PN16 drilling to be specified
Request for a quoteADIS FRANCE
France
drains (single-function suction cups) to remove air pockets from pressurised pipes KEY FEATURES - Built-in operation monitor - Ductile iron body EN-GJS 400 - Blue epoxy anti-corrosion coating - Minimum pressure: 0.1 bar - For brass 1/4 turn shut-off valve - Operating temperature: 1°C to 70°C - Flange drilling to EN1092-2 standard - A.C.S. certified product
Request for a quoteADIS FRANCE
France
PARTS FOR MOUNTING AND SERVICING HYDRAULIC SYSTEMS Locked flange adapter for PE pipes and hoses BMAIN CHARACTERISTICS - Made of ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - For PE pipes - ISO PN10 and PN16 drilled flanges up to DN150, from DN200, ISO PN10 or PN16 drilling to be specified. or PN16 drilling to be specified - Complies with EN 545 - A.C.S. certified product
Request for a quoteADIS FRANCE
France
Brass or cast iron body Cast-iron operating square (30 x 30 mm) Nickel-coated brass ball
Request for a quoteAXON CABLE SAS
France
Vibraflame® is a range of cables designed to resist extreme temperatures ranging from -196°C to +1565°C.These fire resistant range of cables do not propagate flame and do not contain asbestos. They can be used as control, coaxial or power feed cables. Axon’ offer extension and compensating cables for thermocouples insulated with vibraflame® material and resistant to temperatures of up to 1050°C. These heat resistant cables can be made with nickel plated copper, nickel alloy, nickel chrome, iron, constantan, copper alloy, cupronickel for extension and compensating cable. They are insulated with a special combination of mica, organic polymers and fibre glass. Applications include power and control cables in steel works, oil refinery, electric furnace, blast furnace,etc
Request for a quoteFONTE GRISE DISTRIBUTION
France
FGD helps you develop your parts and takes charge of your production, from the moment it leaves the foundry to its final destination, optimising the management of your stocks and flows. EN-GJL-150/200/250 EN 1561, EN-GJS-400-15/500-7 EN 1563 Expertise in the control of additives for specific constraints on the use of cast iron: machining, operating temperature, etc.
Request for a quoteResults for
Cast iron casting - Import exportNumber of results
27 ProductsCountries
Company type
Category